The LDOVL definitions is common to all the modes, not only RUN mode, so in order to avoid confusion, remove the _RUN notation from the PMC1 LDOVL definitions.
Signed-off-by: Fabio Estevam festevam@gmail.com --- Changes since v2: - None
arch/arm/mach-imx/mx7ulp/soc.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-imx/mx7ulp/soc.c b/arch/arm/mach-imx/mx7ulp/soc.c index 751575c95e..4487fa61c0 100644 --- a/arch/arm/mach-imx/mx7ulp/soc.c +++ b/arch/arm/mach-imx/mx7ulp/soc.c @@ -18,10 +18,10 @@ #define PMC1_RUN 0x8 #define PMC1_STOP 0x10 #define PMC1_VLPS 0x14 -#define PMC1_RUN_LDOVL_SHIFT 16 -#define PMC1_RUN_LDOVL_MASK (0x3f << PMC1_RUN_LDOVL_SHIFT) -#define PMC1_RUN_LDOVL_900 0x1e -#define PMC1_RUN_LDOVL_950 0x23 +#define PMC1_LDOVL_SHIFT 16 +#define PMC1_LDOVL_MASK (0x3f << PMC1_LDOVL_SHIFT) +#define PMC1_LDOVL_900 0x1e +#define PMC1_LDOVL_950 0x23 #define PMC1_STATUS 0x20 #define PMC1_STATUS_LDOVLF BIT(8)
@@ -126,8 +126,8 @@ static void init_ldo_mode(void)
/* Set LDOVL to 0.95V in PMC1_RUN */ reg = readl(PMC1_BASE_ADDR + PMC1_RUN); - reg &= ~PMC1_RUN_LDOVL_MASK; - reg |= (PMC1_RUN_LDOVL_950 << PMC1_RUN_LDOVL_SHIFT); + reg &= ~PMC1_LDOVL_MASK; + reg |= (PMC1_LDOVL_950 << PMC1_LDOVL_SHIFT); writel(PMC1_BASE_ADDR + PMC1_RUN, reg);
/* Wait for LDOVLF to be cleared */ @@ -137,14 +137,14 @@ static void init_ldo_mode(void)
/* Set LDOVL to 0.95V in PMC1_STOP */ reg = readl(PMC1_BASE_ADDR + PMC1_STOP); - reg &= ~PMC1_RUN_LDOVL_MASK; - reg |= (PMC1_RUN_LDOVL_950 << PMC1_RUN_LDOVL_SHIFT); + reg &= ~PMC1_LDOVL_MASK; + reg |= (PMC1_LDOVL_950 << PMC1_LDOVL_SHIFT); writel(PMC1_BASE_ADDR + PMC1_STOP, reg);
/* Set LDOVL to 0.90V in PMC1_VLPS */ reg = readl(PMC1_BASE_ADDR + PMC1_VLPS); - reg &= ~PMC1_RUN_LDOVL_MASK; - reg |= (PMC1_RUN_LDOVL_900 << PMC1_RUN_LDOVL_SHIFT); + reg &= ~PMC1_LDOVL_MASK; + reg |= (PMC1_LDOVL_900 << PMC1_LDOVL_SHIFT); writel(PMC1_BASE_ADDR + PMC1_VLPS, reg);
/* Set LDOEN bit */