Note we also drop the SPL check for initializing the 2nd mmc slot, the SPL check is not necessary with Kconfig, because only options explicitly marked as also being for the SPL get set during SPL builds.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- board/sunxi/Kconfig | 8 ++++++++ board/sunxi/board.c | 2 +- 2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 72d6dfa..c9b459a 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -32,6 +32,14 @@ config USB_KEYBOARD Say Y here to add support for using a USB keyboard (typically used in combination with a graphical console on HDMI).
+config MMC_SUNXI_SLOT_EXTRA + int "mmc extra slot number" + default -1 + ---help--- + sunxi builds always enable mmc0, some boards also have a sdcard slot + or emmc on mmc2 or mmc3. Setting this to 2 or 3 will enable support + for this. + config MMC0_CD_PIN int "Card detect pin for mmc0" default -1 diff --git a/board/sunxi/board.c b/board/sunxi/board.c index e819b12..4d602ca 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -110,7 +110,7 @@ int board_mmc_init(bd_t *bis) { mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT); sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT); -#if !defined (CONFIG_SPL_BUILD) && defined (CONFIG_MMC_SUNXI_SLOT_EXTRA) +#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT_EXTRA); sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT_EXTRA); #endif