Hi Marcel,
On 19.05.22 10:03, Marcel Ziswiler wrote:
On Tue, 2022-05-17 at 00:21 +0200, Marcel Ziswiler wrote:
From: Marcel Ziswiler marcel.ziswiler@toradex.com
Move the preloader_console_init() call after spl_early_init() to avoid board hang in SPL.
While at it remove explicit in-code console/debug UART pinmuxing (uart1 and its pinmuxing are already marked as u-boot,dm-spl via device tree).
Fixes: 4551e1898769 ("configs: verdin-imx8mm: verdin-imx8mp: enable dm serial") Signed-off-by: Marcel Ziswiler marcel.ziswiler@toradex.com
I only very recently this weekend learned that verdin-imx8mm has such hang early in SPL issue due to it missing to move the preloader_console_init() call similar as to what Peng did in [1].
Any comments?
Could somebody please pull this one in ASAP as it is currently really broken. Thanks!
My next big merge will take place for the end of the week, I have written down to not forget this.
Stefano
Unfortunately, this likely breaks Peng's [V2,00/14] imx8m: convert to DM_SERIAL series of late [2] and would need applying before ASAP.
Sorry about that.
[1] https://patchwork.ozlabs.org/project/uboot/patch/20220415043538.27868-3-peng... [2] https://patchwork.ozlabs.org/project/uboot/cover/20220505074341.24086-1-peng...
board/toradex/verdin-imx8mm/spl.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-)
diff --git a/board/toradex/verdin-imx8mm/spl.c b/board/toradex/verdin-imx8mm/spl.c index 1f3f38351ef..f0361f93ea9 100644 --- a/board/toradex/verdin-imx8mm/spl.c +++ b/board/toradex/verdin-imx8mm/spl.c @@ -74,15 +74,8 @@ int board_fit_config_name_match(const char *name) } #endif
-#define UART_PAD_CTRL (PAD_CTL_PUE | PAD_CTL_PE | PAD_CTL_DSE4) #define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-/* Verdin UART_3, Console/Debug UART */ -static iomux_v3_cfg_t const uart_pads[] = { - IMX8MM_PAD_SAI2_RXFS_UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL), - IMX8MM_PAD_SAI2_RXC_UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), -};
static iomux_v3_cfg_t const wdog_pads[] = { IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), }; @@ -96,8 +89,6 @@ __weak void board_early_init(void) imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
set_wdog_reset(wdog);
- imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); }
int power_init_board(void) @@ -143,8 +134,6 @@ void board_init_f(ulong dummy)
timer_init();
- preloader_console_init();
/* Clear the BSS. */ memset(__bss_start, 0, __bss_end - __bss_start);
@@ -162,6 +151,8 @@ void board_init_f(ulong dummy) hang(); }
+ preloader_console_init();
enable_tzc380();
power_init_board();