To avoid piling up all the various Kconfig symbols in one place, i.e. common/spl/Kconfig, move the USB Kconfig symbols into drivers/usb/ . This commit moves SPL_USB_HOST and updates help text of both USB_HOST and SPL_USB_HOST .
Signed-off-by: Marek Vasut marex@denx.de --- Cc: Andrew Davis afd@ti.com Cc: Chris Packham judge.packham@gmail.com Cc: Jim Liu jim.t90615@gmail.com Cc: Lukasz Majewski lukma@denx.de Cc: Samuel Holland samuel@sholland.org Cc: Simon Glass sjg@chromium.org Cc: Stefan Roese sr@denx.de Cc: Tom Rini trini@konsulko.com Cc: Weijie Gao weijie.gao@mediatek.com --- common/spl/Kconfig | 10 ---------- drivers/usb/host/Kconfig | 13 +++++++++++++ 2 files changed, 13 insertions(+), 10 deletions(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 2c042ad3066..03d0fd90e09 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -1345,16 +1345,6 @@ config SPL_THERMAL automatic power-off when the temperature gets too high or low. Other devices may be discrete but connected on a suitable bus.
-config SPL_USB_HOST - bool "Support USB host drivers" - help - Enable access to USB (Universal Serial Bus) host devices so that - SPL can load U-Boot from a connected USB peripheral, such as a USB - flash stick. While USB takes a little longer to start up than most - buses, it is very flexible since many different types of storage - device can be attached. This option enables the drivers in - drivers/usb/host as part of an SPL build. - config SPL_USB_STORAGE bool "Support loading from USB" depends on SPL_USB_HOST diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 6213b3c95fa..1a883babf4c 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -6,6 +6,19 @@ comment "USB Host Controller Drivers" config USB_HOST bool select DM_USB + help + Enable access to USB (Universal Serial Bus) host devices so that + SPL can load U-Boot from a connected USB peripheral, such as a USB + flash stick. While USB takes a little longer to start up than most + buses, it is very flexible since many different types of storage + device can be attached. + +config SPL_USB_HOST + bool "Support USB host drivers" + depends on SPL + help + For detailed help see USB_HOST Kconfig symbol. This option enables + the drivers in drivers/usb/host as part of an SPL build.
config USB_XHCI_HCD bool "xHCI HCD (USB 3.0) support"