For eMMC HS400 mode, the DLL reset is a required step for mmc rescan. This step has not been documented in reference manual, but the RM will be fixed sooner or later.
This patch is to add the step of DLL reset, and make sure delay chain locked for HS400.
Fixes: db8f93672b42 ("mmc: fsl_esdhc: support eMMC HS400 mode") Signed-off-by: Yangbo Lu yangbo.lu@nxp.com --- drivers/mmc/fsl_esdhc.c | 28 +++++++++++++++++++++++++--- include/fsl_esdhc.h | 4 ++++ 2 files changed, 29 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 68130ee..a18316e 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -70,7 +70,9 @@ struct fsl_esdhc { uint sdtimingctl; /* SD timing control register */ char reserved8[20]; /* reserved */ uint dllcfg0; /* DLL config 0 register */ - char reserved9[680]; /* reserved */ + char reserved9[12]; /* reserved */ + uint dllstat0; /* DLL status 0 register */ + char reserved10[664];/* reserved */ uint esdhcctl; /* eSDHC control register */ };
@@ -617,9 +619,11 @@ static void esdhc_exit_hs400(struct fsl_esdhc_priv *priv) esdhc_tuning_block_enable(priv, false); }
-static void esdhc_set_timing(struct fsl_esdhc_priv *priv, enum bus_mode mode) +static int esdhc_set_timing(struct fsl_esdhc_priv *priv, enum bus_mode mode) { struct fsl_esdhc *regs = priv->esdhc_regs; + ulong start; + u32 val;
/* Exit HS400 mode before setting any other mode */ if (esdhc_read32(®s->tbctl) & HS400_MODE && @@ -640,17 +644,33 @@ static void esdhc_set_timing(struct fsl_esdhc_priv *priv, enum bus_mode mode) esdhc_setbits32(®s->dllcfg0, DLL_FREQ_SEL);
esdhc_setbits32(®s->dllcfg0, DLL_ENABLE); + + esdhc_setbits32(®s->dllcfg0, DLL_RESET); + udelay(1); + esdhc_clrbits32(®s->dllcfg0, DLL_RESET); + + start = get_timer(0); + val = DLL_STS_SLV_LOCK; + while (!(esdhc_read32(®s->dllstat0) & val)) { + if (get_timer(start) > 1000) { + printf("fsl_esdhc: delay chain lock timeout\n"); + return -ETIMEDOUT; + } + } + esdhc_setbits32(®s->tbctl, HS400_WNDW_ADJUST);
esdhc_clock_control(priv, false); esdhc_flush_async_fifo(priv); } esdhc_clock_control(priv, true); + return 0; }
static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc) { struct fsl_esdhc *regs = priv->esdhc_regs; + int ret;
if (priv->is_sdhc_per_clk) { /* Select to use peripheral clock */ @@ -667,7 +687,9 @@ static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc) set_sysctl(priv, mmc, mmc->clock);
/* Set timing */ - esdhc_set_timing(priv, mmc->selected_mode); + ret = esdhc_set_timing(priv, mmc->selected_mode); + if (ret) + return ret;
/* Set the bus width */ esdhc_clrbits32(®s->proctl, PROCTL_DTW_4 | PROCTL_DTW_8); diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h index e6f1c75..850a304 100644 --- a/include/fsl_esdhc.h +++ b/include/fsl_esdhc.h @@ -187,8 +187,12 @@
/* DLL config 0 register */ #define DLL_ENABLE 0x80000000 +#define DLL_RESET 0x40000000 #define DLL_FREQ_SEL 0x08000000
+/* DLL status 0 register */ +#define DLL_STS_SLV_LOCK 0x08000000 + #define MAX_TUNING_LOOP 40
#define HOSTVER_VENDOR(x) (((x) >> 8) & 0xff)