Hi Alexey,
I failed to apply your patch on the 2014.01 release head.
Regards,
Sonic Zhang
Applying: net/designware - switch driver to phylib usage /home/sonic/projects/u-boot-blackfin.up/.git/rebase-apply/patch:66: space before tab in indent. u16 val) error: patch failed: drivers/net/designware.c:102 error: drivers/net/designware.c: patch does not apply Patch failed at 0001 net/designware - switch driver to phylib usage When you have resolved this problem run "git am --resolved". If you would prefer to skip this patch, instead run "git am --skip". To restore the original branch and stop patching run "git am --abort".
On Mon, Jan 20, 2014 at 5:21 PM, Alexey Brodkin abrodkin@synopsys.com wrote:
On Mon, 2014-01-13 at 15:11 +0400, Alexey Brodkin wrote:
With this change driver will benefit from existing phylib and thus custom phy functionality implemented in the driver will go away:
- Instantiation of the driver is now much shorter - 2 parameters
instead of 4.
- Simplified phy management/functoinality in driver is replaced with
rich functionality of phylib.
- Support of custom phy initialization is now done with existing
"board_phy_config".
I'm wondering if any owner of "bf609-ezkit" or "spear" board(s) may try this change and provide some feedback?
-Alexey _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot