Hai,
Yes the NAND flash is working fine in linux and i am able to load the filesystem and boot etc. Since our NOR flash is of small size 2MB and the linux kernel needs to be programmed in NAND, I am trying to use the NAND in uboot for saving the kernel and boot the linux kernel from NAND flash
Arun
On Wed, Oct 14, 2009 at 2:17 PM, Juergen Beisert jbe@pengutronix.de wrote:
Arun,
On Mittwoch, 14. Oktober 2009, R Arun Kumar wrote:
I am trying to port U-boot 2.0.0 for my custom imx31 board and I am able to boot and load linux etc successfully.
Does Linux work with your the NAND flash?
I want to add NAND flash support and it is observed that the NAND flash
is
been detected but with lot of "Bad erase block messages"
The first time u-boot-v2 detects this NAND? Or after Linux had at least used it one time? Maybe a OOB layout confusion.
Regards, jbe
-- Pengutronix e.K. | Juergen Beisert | Linux Solutions for Science and Industry | Phone: +49-8766-939 228 | Vertretung Sued/Muenchen, Germany | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de/ |