-----Original Message----- From: Valentin Longchamp [mailto:valentin.longchamp@keymile.com] Sent: 16 August 2012 16:55 To: u-boot@lists.denx.de Cc: holger.brunck@keymile.com; Prafulla Wadaskar; valentin.longchamp@keymile.com Subject: [PATCH 1/2] arm/km: add mv88e6352 configuration for kmnusa
The kmnusa board uses a mv88e6352 switch that is connected to the main eth interface of the kirkwood. Therefore the switch must be configured so that the kirkwood's egiga eth inferface can be used.
Signed-off-by: Valentin Longchamp valentin.longchamp@keymile.com Cc: Holger Brunck holger.brunck@keymile.com Cc: Prafulla Wadaskar prafulla@marvell.com
board/keymile/km_arm/km_arm.c | 63 +++++++++++++++++++++++++++++++++++++++++ 1 files changed, 63 insertions(+), 0 deletions(-)
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 2b2ca39..c0069c1 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -385,6 +385,69 @@ void reset_phy(void) /* reset the phy */ miiphy_reset(name, CONFIG_PHY_BASE_ADR); } +#elif defined(CONFIG_KM_PIGGY4_88E6352)
+#include <mv88e6352.h>
+#if defined(CONFIG_KM_NUSA) +struct mv88e_sw_reg extsw_conf[] = {
- /* port 0, PIGY4, autoneg */
- /* first the fix for the 1000Mbits Autoneg, this is from
* a Marvell errata, the regs are undocumented */
May you please follow standard c-style commenting?
Otherwise ack for this patch
Regards.. Prafulla . .