On 6/27/22 09:58, Joel Stanley wrote:
For the u-boot-with-spl.bin target to be useful for the AST2600, set the maximum SPL size which also sets the padding length.
The normal way of loading u-boot is as a FIT, so configure u-boot.img as the SPL playload.
With this the following simple steps can be used to build and boot a system:
make u-boot-with-spl.bin truncate -s 64M u-boot-with-spl.bin qemu-system-arm -nographic -M ast2600-evb \ -drive file=u-boot-with-spl.bin,if=mtd,format=raw
Signed-off-by: Joel Stanley joel@jms.id.au
Reviewed-by: Cédric Le Goater clg@kaod.org
Thanks,
C.
include/configs/evb_ast2600.h | 3 +++ configs/evb-ast2600_defconfig | 2 ++ 2 files changed, 5 insertions(+)
diff --git a/include/configs/evb_ast2600.h b/include/configs/evb_ast2600.h index 3c2155da46df..f5ac88447b52 100644 --- a/include/configs/evb_ast2600.h +++ b/include/configs/evb_ast2600.h @@ -10,6 +10,9 @@
#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
+/* The maximum size the AST2600 bootrom can load is 64KB */ +#define CONFIG_SPL_MAX_SIZE 65536
- /* Misc */ #define STR_HELPER(s) #s #define STR(s) STR_HELPER(s)
diff --git a/configs/evb-ast2600_defconfig b/configs/evb-ast2600_defconfig index 160bccff48e2..5230515f7ab6 100644 --- a/configs/evb-ast2600_defconfig +++ b/configs/evb-ast2600_defconfig @@ -20,6 +20,8 @@ CONFIG_SPL_SIZE_LIMIT=0x10000 CONFIG_SPL=y # CONFIG_ARMV7_NONSEC is not set CONFIG_SYS_LOAD_ADDR=0x83000000 +CONFIG_SPL_PAYLOAD="u-boot.img" +CONFIG_BUILD_TARGET="u-boot-with-spl.bin" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_FIT=y CONFIG_SPL_FIT_SIGNATURE=y