Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - DM_VIDEO support (display_dev.h). - boot0.h added, handles NSIH --> tools/nexell obsolete. - gpio.h: Include-path to errno.h changed.
Signed-off-by: Stefan Bosch stefan_b@posteo.net ---
(no changes since v2)
Changes in v2: - cosmetic: additional GPL license text removed, SPDX-License-Identifier is enough.
arch/arm/mach-nexell/include/mach/boot0.h | 40 +++ arch/arm/mach-nexell/include/mach/clk.h | 24 ++ arch/arm/mach-nexell/include/mach/display.h | 273 +++++++++++++++ arch/arm/mach-nexell/include/mach/display_dev.h | 37 ++ arch/arm/mach-nexell/include/mach/ehci.h | 106 ++++++ arch/arm/mach-nexell/include/mach/gpio.h | 17 + arch/arm/mach-nexell/include/mach/mipi_display.h | 215 ++++++++++++ arch/arm/mach-nexell/include/mach/nexell.h | 352 +++++++++++++++++++ arch/arm/mach-nexell/include/mach/nx_gpio.h | 103 ++++++ arch/arm/mach-nexell/include/mach/reset.h | 19 + arch/arm/mach-nexell/include/mach/sec_reg.h | 15 + arch/arm/mach-nexell/include/mach/tieoff.h | 423 +++++++++++++++++++++++ 12 files changed, 1624 insertions(+) create mode 100644 arch/arm/mach-nexell/include/mach/boot0.h create mode 100644 arch/arm/mach-nexell/include/mach/clk.h create mode 100644 arch/arm/mach-nexell/include/mach/display.h create mode 100644 arch/arm/mach-nexell/include/mach/display_dev.h create mode 100644 arch/arm/mach-nexell/include/mach/ehci.h create mode 100644 arch/arm/mach-nexell/include/mach/gpio.h create mode 100644 arch/arm/mach-nexell/include/mach/mipi_display.h create mode 100644 arch/arm/mach-nexell/include/mach/nexell.h create mode 100644 arch/arm/mach-nexell/include/mach/nx_gpio.h create mode 100644 arch/arm/mach-nexell/include/mach/reset.h create mode 100644 arch/arm/mach-nexell/include/mach/sec_reg.h create mode 100644 arch/arm/mach-nexell/include/mach/tieoff.h
diff --git a/arch/arm/mach-nexell/include/mach/boot0.h b/arch/arm/mach-nexell/include/mach/boot0.h new file mode 100644 index 0000000..e05c07e --- /dev/null +++ b/arch/arm/mach-nexell/include/mach/boot0.h @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0+ + * + * NSIH (Nexell System Information Header) for FriendlyArm nanopi2 board + * + * The NSIH (first 512 Bytes of u-boot.bin) is necessary for the + * 2nd-Bootloader to get information like load address of U-Boot. + * + * 0x400 must be added to CONFIG_SYS_TEXT_BASE to have the actual load and + * start address because 2nd-Bootloader loads with an offset of 0x400 + * (NSIH + 0x200 bytes are not loaded into RAM). + * + * It has been tested / is working with the following 2nd-Bootloader: + * "BL1 by Nexell V1.0.0-gd551e13 [Built on 2018-01-25 16:58:29]" + * + * (C) Copyright 2020 Stefan Bosch stefan_b@posteo.net + */ + +#ifndef __BOOT0_H +#define __BOOT0_H + + ARM_VECTORS + .space 0x30 + .word (_end - _start) + 20 * 1024 /* 0x50: load size + * (bin + 20k for DTB) */ + .space 0x4 + .word CONFIG_SYS_TEXT_BASE + 0x400 /* 0x58: load address */ + .word 0x00000000 + .word CONFIG_SYS_TEXT_BASE + 0x400 /* 0x60: start address */ + .space 0x198 + .byte 'N' /* 0x1FC: "NSIH" signature */ + .byte 'S' + .byte 'I' + .byte 'H' + + /* The NSIH + 0x200 bytes are omitted by the 2nd-Bootloader */ + .space 0x200 +_start: + ARM_VECTORS + +#endif /* __BOOT0_H */ diff --git a/arch/arm/mach-nexell/include/mach/clk.h b/arch/arm/mach-nexell/include/mach/clk.h new file mode 100644 index 0000000..cc5589a --- /dev/null +++ b/arch/arm/mach-nexell/include/mach/clk.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0+ + * + * (C) Copyright 2016 Nexell + * Hyunseok, Jung hsjung@nexell.co.kr + */ + +#ifndef __ASM_ARM_ARCH_CLK_H_ +#define __ASM_ARM_ARCH_CLK_H_ + +struct clk { + unsigned long rate; +}; + +void clk_init(void); + +struct clk *clk_get(const char *id); +void clk_put(struct clk *clk); +unsigned long clk_get_rate(struct clk *clk); +long clk_round_rate(struct clk *clk, unsigned long rate); +int clk_set_rate(struct clk *clk, unsigned long rate); +int clk_enable(struct clk *clk); +void clk_disable(struct clk *clk); + +#endif diff --git a/arch/arm/mach-nexell/include/mach/display.h b/arch/arm/mach-nexell/include/mach/display.h new file mode 100644 index 0000000..b167e63 --- /dev/null +++ b/arch/arm/mach-nexell/include/mach/display.h @@ -0,0 +1,273 @@ +/* SPDX-License-Identifier: GPL-2.0+ + * + * Copyright (C) 2016 Nexell Co., Ltd. + * + * Author: junghyun, kim jhkim@nexell.co.kr + */ + +#ifndef _NX__DISPLAY_H_ +#define _NX__DISPLAY_H_ + +#define DP_PLANS_NUM 3 + +/* the display output format. */ +#define DPC_FORMAT_RGB555 0 /* RGB555 Format */ +#define DPC_FORMAT_RGB565 1 /* RGB565 Format */ +#define DPC_FORMAT_RGB666 2 /* RGB666 Format */ +#define DPC_FORMAT_RGB888 3 /* RGB888 Format */ +#define DPC_FORMAT_MRGB555A 4 /* MRGB555A Format */ +#define DPC_FORMAT_MRGB555B 5 /* MRGB555B Format */ +#define DPC_FORMAT_MRGB565 6 /* MRGB565 Format */ +#define DPC_FORMAT_MRGB666 7 /* MRGB666 Format */ +#define DPC_FORMAT_MRGB888A 8 /* MRGB888A Format */ +#define DPC_FORMAT_MRGB888B 9 /* MRGB888B Format */ +#define DPC_FORMAT_CCIR656 10 /* ITU-R BT.656 / 601(8-bit) */ +#define DPC_FORMAT_CCIR601A 12 /* ITU-R BT.601A */ +#define DPC_FORMAT_CCIR601B 13 /* ITU-R BT.601B */ +#define DPC_FORMAT_4096COLOR 1 /* 4096 Color Format */ +#define DPC_FORMAT_16GRAY 3 /* 16 Level Gray Format */ + +/* layer pixel format. */ +#define MLC_RGBFMT_R5G6B5 0x44320000 /* {R5,G6,B5 }. */ +#define MLC_RGBFMT_B5G6R5 0xC4320000 /* {B5,G6,R5 }. */ +#define MLC_RGBFMT_X1R5G5B5 0x43420000 /* {X1,R5,G5,B5}. */ +#define MLC_RGBFMT_X1B5G5R5 0xC3420000 /* {X1,B5,G5,R5}. */ +#define MLC_RGBFMT_X4R4G4B4 0x42110000 /* {X4,R4,G4,B4}. */ +#define MLC_RGBFMT_X4B4G4R4 0xC2110000 /* {X4,B4,G4,R4}. */ +#define MLC_RGBFMT_X8R3G3B2 0x41200000 /* {X8,R3,G3,B2}. */ +#define MLC_RGBFMT_X8B3G3R2 0xC1200000 /* {X8,B3,G3,R2}. */ +#define MLC_RGBFMT_A1R5G5B5 0x33420000 /* {A1,R5,G5,B5}. */ +#define MLC_RGBFMT_A1B5G5R5 0xB3420000 /* {A1,B5,G5,R5}. */ +#define MLC_RGBFMT_A4R4G4B4 0x22110000 /* {A4,R4,G4,B4}. */ +#define MLC_RGBFMT_A4B4G4R4 0xA2110000 /* {A4,B4,G4,R4}. */ +#define MLC_RGBFMT_A8R3G3B2 0x11200000 /* {A8,R3,G3,B2}. */ +#define MLC_RGBFMT_A8B3G3R2 0x91200000 /* {A8,B3,G3,R2}. */ +#define MLC_RGBFMT_R8G8B8 0x46530000 /* {R8,G8,B8 }. */ +#define MLC_RGBFMT_B8G8R8 0xC6530000 /* {B8,G8,R8 }. */ +#define MLC_RGBFMT_X8R8G8B8 0x46530000 /* {X8,R8,G8,B8}. */ +#define MLC_RGBFMT_X8B8G8R8 0xC6530000 /* {X8,B8,G8,R8}. */ +#define MLC_RGBFMT_A8R8G8B8 0x06530000 /* {A8,R8,G8,B8}. */ +#define MLC_RGBFMT_A8B8G8R8 0x86530000 /* {A8,B8,G8,R8}. */ + +/* the data output order in case of ITU-R BT.656 / 601. */ +#define DPC_YCORDER_CBYCRY 0 +#define DPC_YCORDER_CRYCBY 1 +#define DPC_YCORDER_YCBYCR 2 +#define DPC_YCORDER_YCRYCB 3 + +/* the PAD output clock. */ +#define DPC_PADCLKSEL_VCLK 0 /* VCLK */ +#define DPC_PADCLKSEL_VCLK2 1 /* VCLK2 */ + +/* display sync info for DPC */ +struct dp_sync_info { + int interlace; + int h_active_len; + int h_sync_width; + int h_back_porch; + int h_front_porch; + int h_sync_invert; /* default active low */ + int v_active_len; + int v_sync_width; + int v_back_porch; + int v_front_porch; + int v_sync_invert; /* default active low */ + int pixel_clock_hz; /* HZ */ +}; + +/* syncgen control (DPC) */ +#define DP_SYNC_DELAY_RGB_PVD (1 << 0) +#define DP_SYNC_DELAY_HSYNC_CP1 (1 << 1) +#define DP_SYNC_DELAY_VSYNC_FRAM (1 << 2) +#define DP_SYNC_DELAY_DE_CP (1 << 3) + +struct dp_ctrl_info { + /* clock gen */ + int clk_src_lv0; + int clk_div_lv0; + int clk_src_lv1; + int clk_div_lv1; + /* scan format */ + int interlace; + /* syncgen format */ + unsigned int out_format; + int invert_field; /* 0:normal(Low odd), 1:invert (low even) */ + int swap_RB; + unsigned int yc_order; /* for CCIR output */ + /* extern sync delay */ + int delay_mask; /* if 0, set defalut delays */ + int d_rgb_pvd; /* delay for RGB/PVD, 0~16, default 0 */ + int d_hsync_cp1; /* delay for HSYNC/CP1, 0~63, default 12 */ + int d_vsync_fram; /* delay for VSYNC/FRAM, 0~63, default 12 */ + int d_de_cp2; /* delay for DE/CP2, 0~63, default 12 */ + /* sync offset */ + int vs_start_offset; /* start vsync offset, defatult 0 */ + int vs_end_offset; /* end vsync offset, default 0 */ + int ev_start_offset; /* start even vsync offset, default 0 */ + int ev_end_offset; /* end even vsync offset , default 0 */ + /* pad clock seletor */ + int vck_select; /* 0=vclk0, 1=vclk2 */ + int clk_inv_lv0; /* OUTCLKINVn */ + int clk_delay_lv0; /* OUTCLKDELAYn */ + int clk_inv_lv1; /* OUTCLKINVn */ + int clk_delay_lv1; /* OUTCLKDELAYn */ + int clk_sel_div1; /* 0=clk1_inv, 1=clk1_div_2_ns */ +}; + +/* multi layer control (MLC) */ +struct dp_plane_top { + int screen_width; + int screen_height; + int video_prior; /* 0: video>RGBn, 1: RGB0>video>RGB1, + * 2: RGB0 > RGB1 > video .. */ + int interlace; + int plane_num; + unsigned int back_color; +}; + +struct dp_plane_info { + int layer; + unsigned int fb_base; + int left; + int top; + int width; + int height; + int pixel_byte; + unsigned int format; + int alpha_on; + int alpha_depth; + int tp_on; /* transparency color enable */ + unsigned int tp_color; + unsigned int mem_lock_size; /* memory burst access (4,8,16) */ + int video_layer; + int enable; +}; + +/* + * LCD device dependency struct + * RGB, LVDS, MiPi, HDMI + */ +enum { + DP_DEVICE_RESCONV = 0, + DP_DEVICE_RGBLCD = 1, + DP_DEVICE_HDMI = 2, + DP_DEVICE_MIPI = 3, + DP_DEVICE_LVDS = 4, + DP_DEVICE_CVBS = 5, + DP_DEVICE_DP0 = 6, + DP_DEVICE_DP1 = 7, + DP_DEVICE_END, +}; + +enum { + DP_CLOCK_RESCONV = 0, + DP_CLOCK_LCDIF = 1, + DP_CLOCK_MIPI = 2, + DP_CLOCK_LVDS = 3, + DP_CLOCK_HDMI = 4, + DP_CLOCK_END, +}; + +enum dp_lvds_format { + DP_LVDS_FORMAT_VESA = 0, + DP_LVDS_FORMAT_JEIDA = 1, + DP_LVDS_FORMAT_LOC = 2, +}; + +#define DEF_VOLTAGE_LEVEL (0x20) + +struct dp_lvds_dev { + enum dp_lvds_format lvds_format; /* 0:VESA, 1:JEIDA, 2: Location */ + int pol_inv_hs; /* hsync polarity invert for VESA, JEIDA */ + int pol_inv_vs; /* bsync polarity invert for VESA, JEIDA */ + int pol_inv_de; /* de polarity invert for VESA, JEIDA */ + int pol_inv_ck; /* input clock(pixel clock) polarity invert */ + int voltage_level; + /* Location setting */ + unsigned int loc_map[9]; /* Location Setting */ + unsigned int loc_mask[2]; /* Location Setting, 0 ~ 34 */ + unsigned int loc_pol[2]; /* Location Setting, 0 ~ 34 */ +}; + +#include "mipi_display.h" + +struct dp_mipi_dev { + int lp_bitrate; /* to lcd setup, low power bitrate (150, 100, 80 Mhz) */ + int hs_bitrate; /* to lcd data, high speed bitrate (1000, ... Mhz) */ + int lpm_trans; + int command_mode; + unsigned int hs_pllpms; + unsigned int hs_bandctl; + unsigned int lp_pllpms; + unsigned int lp_bandctl; + struct mipi_dsi_device dsi; +}; + +struct dp_rgb_dev { + int lcd_mpu_type; +}; + +struct dp_hdmi_dev { + int preset; +}; + +/* platform data for the driver model */ +struct nx_display_platdata { + int module; + struct dp_sync_info sync; + struct dp_ctrl_info ctrl; + struct dp_plane_top top; + struct dp_plane_info plane[DP_PLANS_NUM]; + int dev_type; + void *device; +}; + +/* Lcd api */ +void nx_lvds_display(int module, + struct dp_sync_info *sync, struct dp_ctrl_info *ctrl, + struct dp_plane_top *top, + struct dp_plane_info *planes, + struct dp_lvds_dev *dev); + +void nx_rgb_display(int module, + struct dp_sync_info *sync, struct dp_ctrl_info *ctrl, + struct dp_plane_top *top, struct dp_plane_info *planes, + struct dp_rgb_dev *dev); + +void nx_hdmi_display(int module, + struct dp_sync_info *sync, struct dp_ctrl_info *ctrl, + struct dp_plane_top *top, + struct dp_plane_info *planes, + struct dp_hdmi_dev *dev); + +void nx_mipi_display(int module, + struct dp_sync_info *sync, struct dp_ctrl_info *ctrl, + struct dp_plane_top *top, + struct dp_plane_info *planes, + struct dp_mipi_dev *dev); + +int nx_mipi_dsi_lcd_bind(struct mipi_dsi_device *dsi); + +/* disaply api */ +void dp_control_init(int module); +int dp_control_setup(int module, struct dp_sync_info *sync, + struct dp_ctrl_info *ctrl); +void dp_control_enable(int module, int on); + +void dp_plane_init(int module); +int dp_plane_screen_setup(int module, struct dp_plane_top *top); +void dp_plane_screen_enable(int module, int on); + +int dp_plane_layer_setup(int module, struct dp_plane_info *plane); +void dp_plane_layer_enable(int module, struct dp_plane_info *plane, int on); + +int dp_plane_set_enable(int module, int layer, int on); +int dp_plane_set_address(int module, int layer, unsigned int address); +int dp_plane_wait_vsync(int module, int layer, int fps); + +#if defined CONFIG_SPL_BUILD || \ + (!defined(CONFIG_DM) && !defined(CONFIG_OF_CONTROL)) +int nx_display_probe(struct nx_display_platdata *plat); +#endif + +#endif diff --git a/arch/arm/mach-nexell/include/mach/display_dev.h b/arch/arm/mach-nexell/include/mach/display_dev.h new file mode 100644 index 0000000..77eb614 --- /dev/null +++ b/arch/arm/mach-nexell/include/mach/display_dev.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0+ + * + * Copyright (C) 2016 Nexell Co., Ltd. + * + * Author: junghyun, kim jhkim@nexell.co.kr + */ + +#ifndef _NX__DISPLAY_DEV_H_ +#define _NX__DISPLAY_DEV_H_ + +#if defined CONFIG_VIDEO || defined CONFIG_DM_VIDEO +#include <video_fb.h> +#elif defined CONFIG_LCD +#include <lcd.h> +#endif + +struct nx_display_dev { +#if defined CONFIG_VIDEO || defined CONFIG_DM_VIDEO + GraphicDevice graphic_device; +#elif defined CONFIG_LCD + vidinfo_t *panel_info; +#endif + unsigned long base; + int module; + struct dp_sync_info sync; + struct dp_ctrl_info ctrl; + struct dp_plane_top top; + struct dp_plane_info planes[DP_PLANS_NUM]; + int dev_type; + void *device; + struct dp_plane_info *fb_plane; + unsigned int depth; /* byte per pixel */ + unsigned int fb_addr; + unsigned int fb_size; +}; + +#endif diff --git a/arch/arm/mach-nexell/include/mach/ehci.h b/arch/arm/mach-nexell/include/mach/ehci.h new file mode 100644 index 0000000..545153b --- /dev/null +++ b/arch/arm/mach-nexell/include/mach/ehci.h @@ -0,0 +1,106 @@ +/* SPDX-License-Identifier: GPL-2.0+ + * + * NEXELL USB HOST EHCI Controller + * + * (C) Copyright 2016 Nexell + * Hyunseok, Jung hsjung@nexell.co.kr + */ + +#ifndef __ASM_ARM_ARCH_EHCI_H__ +#define __ASM_ARM_ARCH_EHCI_H__ + +/* Nexell USBHOST PHY registers */ + +/* USBHOST Configuration 0 Register */ +#define NX_HOST_CON0 0x14 +#define NX_HOST_CON0_SS_WORD_IF BIT(26) +#define NX_HOST_CON0_SS_WORD_IF_ENB BIT(25) +#define NX_HOST_CON0_SS_WORD_IF_16 ( \ + NX_HOST_CON0_SS_WORD_IF | \ + NX_HOST_CON0_SS_WORD_IF_ENB) + +#define NX_HOST_CON0_HSIC_480M_FROM_OTG_PHY BIT(24) +#define NX_HOST_CON0_HSIC_FREE_CLOCK_ENB BIT(23) +#define NX_HOST_CON0_HSIC_CLK_MASK (0x3 << 23) + +#define NX_HOST_CON0_N_HOST_HSIC_RESET_SYNC BIT(22) +#define NX_HOST_CON0_N_HOST_UTMI_RESET_SYNC BIT(21) +#define NX_HOST_CON0_N_HOST_PHY_RESET_SYNC BIT(20) +#define NX_HOST_CON0_UTMI_RESET_SYNC ( \ + NX_HOST_CON0_N_HOST_HSIC_RESET_SYNC | \ + NX_HOST_CON0_N_HOST_UTMI_RESET_SYNC | \ + NX_HOST_CON0_N_HOST_PHY_RESET_SYNC) + +#define NX_HOST_CON0_N_AUXWELL_RESET_SYNC BIT(19) +#define NX_HOST_CON0_N_OHCI_RESET_SYNC BIT(18) +#define NX_HOST_CON0_N_RESET_SYNC BIT(17) +#define NX_HOST_CON0_AHB_RESET_SYNC ( \ + NX_HOST_CON0_N_AUXWELL_RESET_SYNC | \ + NX_HOST_CON0_N_OHCI_RESET_SYNC | \ + NX_HOST_CON0_N_RESET_SYNC) + +#define NX_HOST_CON0_HSIC_EN_PORT1 (0x2 << 14) +#define NX_HOST_CON0_HSIC_EN_MASK (0x7 << 14) + +/* USBHOST Configuration 1 Register */ +#define NX_HOST_CON1 0x18 + +/* USBHOST Configuration 2 Register */ +#define NX_HOST_CON2 0x1C +#define NX_HOST_CON2_SS_ENA_INCRX_ALIGN (0x1 << 28) +#define NX_HOST_CON2_SS_ENA_INCR4 (0x1 << 27) +#define NX_HOST_CON2_SS_ENA_INCR8 (0x1 << 26) +#define NX_HOST_CON2_SS_ENA_INCR16 (0x1 << 25) +#define NX_HOST_CON2_SS_DMA_BURST_MASK \ + (NX_HOST_CON2_SS_ENA_INCR16 | NX_HOST_CON2_SS_ENA_INCR8 | \ + NX_HOST_CON2_SS_ENA_INCR4 | NX_HOST_CON2_SS_ENA_INCRX_ALIGN) + +#define NX_HOST_CON2_EHCI_SS_ENABLE_DMA_BURST \ + (NX_HOST_CON2_SS_ENA_INCR16 | NX_HOST_CON2_SS_ENA_INCR8 | \ + NX_HOST_CON2_SS_ENA_INCR4 | NX_HOST_CON2_SS_ENA_INCRX_ALIGN) + +#define NX_HOST_CON2_OHCI_SS_ENABLE_DMA_BURST \ + (NX_HOST_CON2_SS_ENA_INCR4 | NX_HOST_CON2_SS_ENA_INCRX_ALIGN) + +#define NX_HOST_CON2_SS_FLADJ_VAL_0_OFFSET (21) +#define NX_HOST_CON2_SS_FLADJ_VAL_OFFSET (3) +#define NX_HOST_CON2_SS_FLADJ_VAL_NUM (6) +#define NX_HOST_CON2_SS_FLADJ_VAL_0_SEL BIT(5) +#define NX_HOST_CON2_SS_FLADJ_VAL_MAX 0x7 + +/* USBHOST Configuration 3 Register */ +#define NX_HOST_CON3 0x20 +#define NX_HOST_CON3_POR BIT(8) +#define NX_HOST_CON3_POR_ENB BIT(7) +#define NX_HOST_CON3_POR_MASK (0x3 << 7) + +/* USBHOST Configuration 4 Register */ +#define NX_HOST_CON4 0x24 +#define NX_HOST_CON4_WORDINTERFACE BIT(9) +#define NX_HOST_CON4_WORDINTERFACE_ENB BIT(8) +#define NX_HOST_CON4_WORDINTERFACE_16 ( \ + NX_HOST_CON4_WORDINTERFACE | \ + NX_HOST_CON4_WORDINTERFACE_ENB) + +/* USBHOST Configuration 5 Register */ +#define NX_HOST_CON5 0x28 +#define NX_HOST_CON5_HSIC_POR BIT(19) +#define NX_HOST_CON5_HSIC_POR_ENB BIT(18) +#define NX_HOST_CON5_HSIC_POR_MASK (0x3 << 18) + +/* USBHOST Configuration 6 Register */ +#define NX_HOST_CON6 0x2C +#define NX_HOST_CON6_HSIC_WORDINTERFACE BIT(13) +#define NX_HOST_CON6_HSIC_WORDINTERFACE_ENB BIT(12) +#define NX_HOST_CON6_HSIC_WORDINTERFACE_16 ( \ + NX_HOST_CON6_HSIC_WORDINTERFACE | \ + NX_HOST_CON6_HSIC_WORDINTERFACE_ENB) + +/* Register map for PHY control */ +struct nx_usb_phy { + unsigned int reserved; + unsigned int others[4]; + unsigned int usbhost_con[7]; +}; + +#endif /* __ASM_ARM_ARCH_EHCI_H__ */ diff --git a/arch/arm/mach-nexell/include/mach/gpio.h b/arch/arm/mach-nexell/include/mach/gpio.h new file mode 100644 index 0000000..7167d3c --- /dev/null +++ b/arch/arm/mach-nexell/include/mach/gpio.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0+ + * + * (C) Copyright 2016 Nexell + * DeokJin, Lee truevirtue@nexell.co.kr + */ + +#ifndef __ASM_ARCH_NEXELL_GPIO_H +#define __ASM_ARCH_NEXELL_GPIO_H + +#include <asm/io.h> +#include <linux/errno.h> + +#define PIN_BASE 0 + +#define MAX_GPIO_BANKS 5 + +#endif /* __ASM_ARCH_NEXELL_GPIO_H */ diff --git a/arch/arm/mach-nexell/include/mach/mipi_display.h b/arch/arm/mach-nexell/include/mach/mipi_display.h new file mode 100644 index 0000000..f3fdec6 --- /dev/null +++ b/arch/arm/mach-nexell/include/mach/mipi_display.h @@ -0,0 +1,215 @@ +/* SPDX-License-Identifier: GPL-2.0+ + * + * Defines for Mobile Industry Processor Interface (MIPI(R)) + * Display Working Group standards: DSI, DCS, DBI, DPI + * + * Copyright (C) 2010 Guennadi Liakhovetski g.liakhovetski@gmx.de + * Copyright (C) 2006 Nokia Corporation + * Author: Imre Deak imre.deak@nokia.com + */ + +#ifndef MIPI_DISPLAY_H +#define MIPI_DISPLAY_H + +/* MIPI DSI Processor-to-Peripheral transaction types */ +enum { + MIPI_DSI_V_SYNC_START = 0x01, + MIPI_DSI_V_SYNC_END = 0x11, + MIPI_DSI_H_SYNC_START = 0x21, + MIPI_DSI_H_SYNC_END = 0x31, + + MIPI_DSI_COLOR_MODE_OFF = 0x02, + MIPI_DSI_COLOR_MODE_ON = 0x12, + MIPI_DSI_SHUTDOWN_PERIPHERAL = 0x22, + MIPI_DSI_TURN_ON_PERIPHERAL = 0x32, + + MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM = 0x03, + MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM = 0x13, + MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM = 0x23, + + MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM = 0x04, + MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM = 0x14, + MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM = 0x24, + + MIPI_DSI_DCS_SHORT_WRITE = 0x05, + MIPI_DSI_DCS_SHORT_WRITE_PARAM = 0x15, + + MIPI_DSI_DCS_READ = 0x06, + + MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE = 0x37, + + MIPI_DSI_END_OF_TRANSMISSION = 0x08, + + MIPI_DSI_NULL_PACKET = 0x09, + MIPI_DSI_BLANKING_PACKET = 0x19, + MIPI_DSI_GENERIC_LONG_WRITE = 0x29, + MIPI_DSI_DCS_LONG_WRITE = 0x39, + + MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20 = 0x0c, + MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24 = 0x1c, + MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16 = 0x2c, + + MIPI_DSI_PACKED_PIXEL_STREAM_30 = 0x0d, + MIPI_DSI_PACKED_PIXEL_STREAM_36 = 0x1d, + MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12 = 0x3d, + + MIPI_DSI_PACKED_PIXEL_STREAM_16 = 0x0e, + MIPI_DSI_PACKED_PIXEL_STREAM_18 = 0x1e, + MIPI_DSI_PIXEL_STREAM_3BYTE_18 = 0x2e, + MIPI_DSI_PACKED_PIXEL_STREAM_24 = 0x3e, +}; + +/* MIPI DSI Peripheral-to-Processor transaction types */ +enum { + MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT = 0x02, + MIPI_DSI_RX_END_OF_TRANSMISSION = 0x08, + MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE = 0x11, + MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE = 0x12, + MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE = 0x1a, + MIPI_DSI_RX_DCS_LONG_READ_RESPONSE = 0x1c, + MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE = 0x21, + MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE = 0x22, +}; + +/* MIPI DCS commands */ +enum { + MIPI_DCS_NOP = 0x00, + MIPI_DCS_SOFT_RESET = 0x01, + MIPI_DCS_GET_DISPLAY_ID = 0x04, + MIPI_DCS_GET_RED_CHANNEL = 0x06, + MIPI_DCS_GET_GREEN_CHANNEL = 0x07, + MIPI_DCS_GET_BLUE_CHANNEL = 0x08, + MIPI_DCS_GET_DISPLAY_STATUS = 0x09, + MIPI_DCS_GET_POWER_MODE = 0x0A, + MIPI_DCS_GET_ADDRESS_MODE = 0x0B, + MIPI_DCS_GET_PIXEL_FORMAT = 0x0C, + MIPI_DCS_GET_DISPLAY_MODE = 0x0D, + MIPI_DCS_GET_SIGNAL_MODE = 0x0E, + MIPI_DCS_GET_DIAGNOSTIC_RESULT = 0x0F, + MIPI_DCS_ENTER_SLEEP_MODE = 0x10, + MIPI_DCS_EXIT_SLEEP_MODE = 0x11, + MIPI_DCS_ENTER_PARTIAL_MODE = 0x12, + MIPI_DCS_ENTER_NORMAL_MODE = 0x13, + MIPI_DCS_EXIT_INVERT_MODE = 0x20, + MIPI_DCS_ENTER_INVERT_MODE = 0x21, + MIPI_DCS_SET_GAMMA_CURVE = 0x26, + MIPI_DCS_SET_DISPLAY_OFF = 0x28, + MIPI_DCS_SET_DISPLAY_ON = 0x29, + MIPI_DCS_SET_COLUMN_ADDRESS = 0x2A, + MIPI_DCS_SET_PAGE_ADDRESS = 0x2B, + MIPI_DCS_WRITE_MEMORY_START = 0x2C, + MIPI_DCS_WRITE_LUT = 0x2D, + MIPI_DCS_READ_MEMORY_START = 0x2E, + MIPI_DCS_SET_PARTIAL_AREA = 0x30, + MIPI_DCS_SET_SCROLL_AREA = 0x33, + MIPI_DCS_SET_TEAR_OFF = 0x34, + MIPI_DCS_SET_TEAR_ON = 0x35, + MIPI_DCS_SET_ADDRESS_MODE = 0x36, + MIPI_DCS_SET_SCROLL_START = 0x37, + MIPI_DCS_EXIT_IDLE_MODE = 0x38, + MIPI_DCS_ENTER_IDLE_MODE = 0x39, + MIPI_DCS_SET_PIXEL_FORMAT = 0x3A, + MIPI_DCS_WRITE_MEMORY_CONTINUE = 0x3C, + MIPI_DCS_READ_MEMORY_CONTINUE = 0x3E, + MIPI_DCS_SET_TEAR_SCANLINE = 0x44, + MIPI_DCS_GET_SCANLINE = 0x45, + MIPI_DCS_READ_DDB_START = 0xA1, + MIPI_DCS_READ_DDB_CONTINUE = 0xA8, +}; + +/* MIPI DCS pixel formats */ +#define MIPI_DCS_PIXEL_FMT_24BIT 7 +#define MIPI_DCS_PIXEL_FMT_18BIT 6 +#define MIPI_DCS_PIXEL_FMT_16BIT 5 +#define MIPI_DCS_PIXEL_FMT_12BIT 3 +#define MIPI_DCS_PIXEL_FMT_8BIT 2 +#define MIPI_DCS_PIXEL_FMT_3BIT 1 + +/* request ACK from peripheral */ +#define MIPI_DSI_MSG_REQ_ACK BIT(0) +/* use Low Power Mode to transmit message */ +#define MIPI_DSI_MSG_USE_LPM BIT(1) + +/** + * struct mipi_dsi_msg - read/write DSI buffer + * @channel: virtual channel id + * @type: payload data type + * @flags: flags controlling this message transmission + * @tx_len: length of @tx_buf + * @tx_buf: data to be written + * @rx_len: length of @rx_buf + * @rx_buf: data to be read, or NULL + */ +struct mipi_dsi_msg { + u8 channel; /* virtual channel id */ + u8 type; /* payload data type */ + u16 flags; /* flags controlling this message transmission */ + size_t tx_len; + const void *tx_buf; + size_t rx_len; + void *rx_buf; +}; + +/* DSI mode flags */ + +/* video mode */ +#define MIPI_DSI_MODE_VIDEO BIT(0) +/* video burst mode */ +#define MIPI_DSI_MODE_VIDEO_BURST BIT(1) +/* video pulse mode */ +#define MIPI_DSI_MODE_VIDEO_SYNC_PULSE BIT(2) +/* enable auto vertical count mode */ +#define MIPI_DSI_MODE_VIDEO_AUTO_VERT BIT(3) +/* enable hsync-end packets in vsync-pulse and v-porch area */ +#define MIPI_DSI_MODE_VIDEO_HSE BIT(4) +/* disable hfront-porch area */ +#define MIPI_DSI_MODE_VIDEO_HFP BIT(5) +/* disable hback-porch area */ +#define MIPI_DSI_MODE_VIDEO_HBP BIT(6) +/* disable hsync-active area */ +#define MIPI_DSI_MODE_VIDEO_HSA BIT(7) +/* flush display FIFO on vsync pulse */ +#define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8) +/* disable EoT packets in HS mode */ +#define MIPI_DSI_MODE_EOT_PACKET BIT(9) +/* device supports non-continuous clock behavior (DSI spec 5.6.1) */ +#define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10) +/* transmit data in low power */ +#define MIPI_DSI_MODE_LPM BIT(11) /* DSI mode flags */ + +enum mipi_dsi_pixel_format { + MIPI_DSI_FMT_RGB888, + MIPI_DSI_FMT_RGB666, + MIPI_DSI_FMT_RGB666_PACKED, + MIPI_DSI_FMT_RGB565, +}; + +/** + * struct mipi_dsi_device - DSI peripheral device + * @host: DSI host for this peripheral + * @dev: driver model device node for this peripheral + * @channel: virtual channel assigned to the peripheral + * @format: pixel format for video mode + * @lanes: number of active data lanes + * @mode_flags: DSI operation mode related flags + */ +struct mipi_dsi_device { + unsigned int channel; + unsigned int lanes; + enum mipi_dsi_pixel_format format; + unsigned long mode_flags; + struct mipi_panel_ops *ops; + ssize_t (*write_buffer)(struct mipi_dsi_device *dsi, + const void *data, size_t len); +}; + +struct mipi_panel_ops { + int (*init)(struct mipi_dsi_device *dsi, int width, int height); + int (*prepare)(struct mipi_dsi_device *dsi); + int (*unprepare)(struct mipi_dsi_device *dsi); + int (*enable)(struct mipi_dsi_device *dsi); + int (*disable)(struct mipi_dsi_device *dsi); + void *private_data; +}; + +#endif diff --git a/arch/arm/mach-nexell/include/mach/nexell.h b/arch/arm/mach-nexell/include/mach/nexell.h new file mode 100644 index 0000000..e42805f --- /dev/null +++ b/arch/arm/mach-nexell/include/mach/nexell.h @@ -0,0 +1,352 @@ +/* SPDX-License-Identifier: GPL-2.0+ + * + * (C) Copyright 2016 Nexell + * Hyunseok, Jung hsjung@nexell.co.kr + */ + +#ifndef __NEXELL_H__ +#define __NEXELL_H__ + +#define PHY_BASEADDR_DMA0 (0xC0000000) +#define PHY_BASEADDR_DMA1 (0xC0001000) +#if defined(CONFIG_ARCH_S5P4418) +#define PHY_BASEADDR_INTC0 (0xC0002000) +#define PHY_BASEADDR_INTC1 (0xC0003000) +#elif defined(CONFIG_ARCH_S5P6818) +#define PHY_BASEADDR_INTC (0xC0008000) +#endif +#define PHY_BASEADDR_CLKPWR (0xC0010000) +#define PHY_BASEADDR_RTC (0xC0010C00) +#define PHY_BASEADDR_ALIVE (0xC0010800) +#define PHY_BASEADDR_RSTCON (0xC0012000) +#define PHY_BASEADDR_TIEOFF (0xC0011000) +#define PHY_BASEADDR_PDM (0xC0014000) +#define PHY_BASEADDR_CRYPTO (0xC0015000) +#define PHY_BASEADDR_TIMER (0xC0017000) +#define PHY_BASEADDR_PWM (0xC0018000) +#define PHY_BASEADDR_WDT (0xC0019000) +#define PHY_BASEADDR_GPIOA (0xC001A000) +#define PHY_BASEADDR_GPIOB (0xC001B000) +#define PHY_BASEADDR_GPIOC (0xC001C000) +#define PHY_BASEADDR_GPIOD (0xC001D000) +#define PHY_BASEADDR_GPIOE (0xC001E000) +#define PHY_BASEADDR_OHCI (0xC0020000) +#define PHY_BASEADDR_EHCI (0xC0030000) +#define PHY_BASEADDR_HSOTG (0xC0040000) +#define PHY_BASEADDR_ADC (0xC0053000) +#define PHY_BASEADDR_PPM (0xC0054000) +#define PHY_BASEADDR_I2S0 (0xC0055000) +#define PHY_BASEADDR_I2S1 (0xC0056000) +#define PHY_BASEADDR_I2S2 (0xC0057000) +#define PHY_BASEADDR_AC97 (0xC0058000) +#define PHY_BASEADDR_SPDIF_TX (0xC0059000) +#define PHY_BASEADDR_SPDIF_RX (0xC005A000) +#define PHY_BASEADDR_SSP0 (0xC005B000) +#define PHY_BASEADDR_SSP1 (0xC005C000) +#define PHY_BASEADDR_SSP2 (0xC005F000) +#define PHY_BASEADDR_MPEGTSI (0xC005D000) +#define PHY_BASEADDR_GMAC (0xC0060000) +#define PHY_BASEADDR_VIP0 (0xC0063000) +#define PHY_BASEADDR_VIP1 (0xC0064000) +#if defined(CONFIG_ARCH_S5P6818) +#define PHY_BASEADDR_VIP2 (0xC0099000) +#endif +#define PHY_BASEADDR_DEINTERLACE (0xC0065000) +#define PHY_BASEADDR_SCALER (0xC0066000) +#define PHY_BASEADDR_ECID (0xC0067000) +#define PHY_BASEADDR_SDMMC0 (0xC0062000) +#define PHY_BASEADDR_SDMMC1 (0xC0068000) +#define PHY_BASEADDR_SDMMC2 (0xC0069000) +#define PHY_BASEADDR_MALI400 (0xC0070000) +#define PHY_BASEADDR_CODA_APB0 (0xC0080000) +#define PHY_BASEADDR_CODA_APB1 (0xC0081000) +#define PHY_BASEADDR_CODA_APB2 (0xC0082000) +#define PHY_BASEADDR_CODA_APB3 (0xC0083000) +/* dma (O), modem(X), UART0_MODULE */ +#define PHY_BASEADDR_UART0 (0xC00A1000) +/* dma (O), modem(O), pl01115_Uart_modem_MODULE */ +#define PHY_BASEADDR_UART1 (0xC00A0000) +/* dma (O), modem(X), UART1_MODULE */ +#define PHY_BASEADDR_UART2 (0xC00A2000) +/* dma (X), modem(X), pl01115_Uart_nodma0_MODULE */ +#define PHY_BASEADDR_UART3 (0xC00A3000) +/* dma (X), modem(X), pl01115_Uart_nodma1_MODULE */ +#define PHY_BASEADDR_UART4 (0xC006D000) +/* dma (X), modem(X), pl01115_Uart_nodma2_MODULE */ +#define PHY_BASEADDR_UART5 (0xC006F000) +#define PHY_BASEADDR_I2C0 (0xC00A4000) +#define PHY_BASEADDR_I2C1 (0xC00A5000) +#define PHY_BASEADDR_I2C2 (0xC00A6000) +#define PHY_BASEADDR_CAN0 (0xC00CE000) +#define PHY_BASEADDR_CAN1 (0xC00CF000) +#define PHY_BASEADDR_MIPI (0xC00D0000) +#define PHY_BASEADDR_DISPLAYTOP (0xC0100000) + +#define PHY_BASEADDR_CLKGEN0 (0xC00BB000) /* TIMER_1 */ +#define PHY_BASEADDR_CLKGEN1 (0xC00BC000) /* TIMER_2 */ +#define PHY_BASEADDR_CLKGEN2 (0xC00BD000) /* TIMER_3 */ +#define PHY_BASEADDR_CLKGEN3 (0xC00BE000) /* PWM_1 */ +#define PHY_BASEADDR_CLKGEN4 (0xC00BF000) /* PWM_2 */ +#define PHY_BASEADDR_CLKGEN5 (0xC00C0000) /* PWM_3 */ +#define PHY_BASEADDR_CLKGEN6 (0xC00AE000) /* I2C_0 */ +#define PHY_BASEADDR_CLKGEN7 (0xC00AF000) /* I2C_1 */ +#define PHY_BASEADDR_CLKGEN8 (0xC00B0000) /* I2C_2 */ +#define PHY_BASEADDR_CLKGEN9 (0xC00CA000) /* MIPI */ +#define PHY_BASEADDR_CLKGEN10 (0xC00C8000) /* GMAC */ +#define PHY_BASEADDR_CLKGEN11 (0xC00B8000) /* SPDIF_TX */ +#define PHY_BASEADDR_CLKGEN12 (0xC00B7000) /* MPEGTSI */ +#define PHY_BASEADDR_CLKGEN13 (0xC00BA000) /* PWM_0 */ +#define PHY_BASEADDR_CLKGEN14 (0xC00B9000) /* TIMER_0 */ +#define PHY_BASEADDR_CLKGEN15 (0xC00B2000) /* I2S_0 */ +#define PHY_BASEADDR_CLKGEN16 (0xC00B3000) /* I2S_1 */ +#define PHY_BASEADDR_CLKGEN17 (0xC00B4000) /* I2S_2 */ +#define PHY_BASEADDR_CLKGEN18 (0xC00C5000) /* SDHC_0 */ +#define PHY_BASEADDR_CLKGEN19 (0xC00CC000) /* SDHC_1 */ +#define PHY_BASEADDR_CLKGEN20 (0xC00CD000) /* SDHC_2 */ +#define PHY_BASEADDR_CLKGEN21 (0xC00C3000) /* MALI */ +#define PHY_BASEADDR_CLKGEN22 (0xC00A9000) /* UART_0 */ +#define PHY_BASEADDR_CLKGEN23 (0xC00AA000) /* UART_2 */ +#define PHY_BASEADDR_CLKGEN24 (0xC00A8000) /* UART_1 */ +#define PHY_BASEADDR_CLKGEN25 (0xC00AB000) /* UART_3 */ +#define PHY_BASEADDR_CLKGEN26 (0xC006E000) /* UART_4 */ +#define PHY_BASEADDR_CLKGEN27 (0xC00B1000) /* UART_5 */ +#define PHY_BASEADDR_CLKGEN28 (0xC00B5000) /* DEINTERLACE */ +#define PHY_BASEADDR_CLKGEN29 (0xC00C4000) /* PPM */ +#define PHY_BASEADDR_CLKGEN30 (0xC00C1000) /* VIP_0 */ +#define PHY_BASEADDR_CLKGEN31 (0xC00C2000) /* VIP_1 */ +#define PHY_BASEADDR_CLKGEN32 (0xC006B000) /* USB2HOST */ +#define PHY_BASEADDR_CLKGEN33 (0xC00C7000) /* CODA */ +#define PHY_BASEADDR_CLKGEN34 (0xC00C6000) /* CRYPTO */ +#define PHY_BASEADDR_CLKGEN35 (0xC00B6000) /* SCALER */ +#define PHY_BASEADDR_CLKGEN36 (0xC00CB000) /* PDM */ +#define PHY_BASEADDR_CLKGEN37 (0xC00AC000) /* SPI0 */ +#define PHY_BASEADDR_CLKGEN38 (0xC00AD000) /* SPI1 */ +#define PHY_BASEADDR_CLKGEN39 (0xC00A7000) /* SPI2 */ +#if defined(CONFIG_ARCH_S5P6818) +#define PHY_BASEADDR_CLKGEN40 (0xC009A000) +#endif +#define PHY_BASEADDR_DREX (0xC00E0000) + +#define PHY_BASEADDR_CS_NAND (0x2C000000) + +#define PHY_BASEADDR_SRAM (0xFFFF0000) + +/* + * Nexell clock generator + */ +#define CLK_ID_TIMER_1 0 +#define CLK_ID_TIMER_2 1 +#define CLK_ID_TIMER_3 2 +#define CLK_ID_PWM_1 3 +#define CLK_ID_PWM_2 4 +#define CLK_ID_PWM_3 5 +#define CLK_ID_I2C_0 6 +#define CLK_ID_I2C_1 7 +#define CLK_ID_I2C_2 8 +#define CLK_ID_MIPI 9 +#define CLK_ID_GMAC 10 /* External Clock 1 */ +#define CLK_ID_SPDIF_TX 11 +#define CLK_ID_MPEGTSI 12 +#define CLK_ID_PWM_0 13 +#define CLK_ID_TIMER_0 14 +#define CLK_ID_I2S_0 15 /* External Clock 1 */ +#define CLK_ID_I2S_1 16 /* External Clock 1 */ +#define CLK_ID_I2S_2 17 /* External Clock 1 */ +#define CLK_ID_SDHC_0 18 +#define CLK_ID_SDHC_1 19 +#define CLK_ID_SDHC_2 20 +#define CLK_ID_MALI 21 +#define CLK_ID_UART_0 22 /* UART0_MODULE */ +#define CLK_ID_UART_2 23 /* UART1_MODULE */ +#define CLK_ID_UART_1 24 /* pl01115_Uart_modem_MODULE */ +#define CLK_ID_UART_3 25 /* pl01115_Uart_nodma0_MODULE */ +#define CLK_ID_UART_4 26 /* pl01115_Uart_nodma1_MODULE */ +#define CLK_ID_UART_5 27 /* pl01115_Uart_nodma2_MODULE */ +#define CLK_ID_DIT 28 +#define CLK_ID_PPM 29 +#define CLK_ID_VIP_0 30 /* External Clock 1 */ +#define CLK_ID_VIP_1 31 /* External Clock 1, 2 */ +#define CLK_ID_USB2HOST 32 /* External Clock 2 */ +#define CLK_ID_CODA 33 +#define CLK_ID_CRYPTO 34 +#define CLK_ID_SCALER 35 +#define CLK_ID_PDM 36 +#define CLK_ID_SPI_0 37 +#define CLK_ID_SPI_1 38 +#define CLK_ID_SPI_2 39 +#define CLK_ID_MAX 39 + +/* + * Nexell Reset control + */ +#define RESET_ID_AC97 0 +#define RESET_ID_CPU1 1 +#define RESET_ID_CPU2 2 +#define RESET_ID_CPU3 3 +#define RESET_ID_WD1 4 +#define RESET_ID_WD2 5 +#define RESET_ID_WD3 6 +#define RESET_ID_CRYPTO 7 +#define RESET_ID_DEINTERLACE 8 +#define RESET_ID_DISP_TOP 9 +#define RESET_ID_DISPLAY 10 +#define RESET_ID_RESCONV 11 +#define RESET_ID_LCDIF 12 +#define RESET_ID_HDMI 13 +#define RESET_ID_HDMI_VIDEO 14 +#define RESET_ID_HDMI_SPDIF 15 +#define RESET_ID_HDMI_TMDS 16 +#define RESET_ID_HDMI_PHY 17 +#define RESET_ID_LVDS 18 +#define RESET_ID_ECID 19 +#define RESET_ID_I2C0 20 +#define RESET_ID_I2C1 21 +#define RESET_ID_I2C2 22 +#define RESET_ID_I2S0 23 +#define RESET_ID_I2S1 24 +#define RESET_ID_I2S2 25 +#define RESET_ID_DREX_C 26 +#define RESET_ID_DREX_A 27 +#define RESET_ID_DREX 28 +#define RESET_ID_MIPI 29 +#define RESET_ID_MIPI_DSI 30 +#define RESET_ID_MIPI_CSI 31 +#define RESET_ID_MIPI_PHY_S 32 +#define RESET_ID_MIPI_PHY_M 33 +#define RESET_ID_MPEGTSI 34 +#define RESET_ID_PDM 35 +#define RESET_ID_TIMER 36 +#define RESET_ID_PWM 37 +#define RESET_ID_SCALER 38 +#define RESET_ID_SDMMC0 39 +#define RESET_ID_SDMMC1 40 +#define RESET_ID_SDMMC2 41 +#define RESET_ID_SPDIFRX 42 +#define RESET_ID_SPDIFTX 43 +#define RESET_ID_SSP0_P 44 +#define RESET_ID_SSP0 45 +#define RESET_ID_SSP1_P 46 +#define RESET_ID_SSP1 47 +#define RESET_ID_SSP2_P 48 +#define RESET_ID_SSP2 49 +#define RESET_ID_UART0 50 /* UART1 */ +#define RESET_ID_UART1 51 /* pl01115_Uart_modem */ +#define RESET_ID_UART2 52 /* UART1 */ +#define RESET_ID_UART3 53 /* pl01115_Uart_nodma0 */ +#define RESET_ID_UART4 54 /* pl01115_Uart_nodma1 */ +#define RESET_ID_UART5 55 /* pl01115_Uart_nodma2 */ +#define RESET_ID_USB20HOST 56 +#define RESET_ID_USB20OTG 57 +#define RESET_ID_WDT 58 +#define RESET_ID_WDT_POR 59 +#define RESET_ID_ADC 60 +#define RESET_ID_CODA_A 61 +#define RESET_ID_CODA_P 62 +#define RESET_ID_CODA_C 63 +#define RESET_ID_DWC_GMAC 64 +#define RESET_ID_MALI400 65 +#define RESET_ID_PPM 66 +#define RESET_ID_VIP1 67 +#define RESET_ID_VIP0 68 +#if defined(CONFIG_ARCH_S5P6818) +#define RESET_ID_VIP2 69 +#endif + +/* + * device name + */ +#define DEV_NAME_UART "nx-uart" /* pl0115 (amba-pl011.c) */ +#define DEV_NAME_FB "nx-fb" +#define DEV_NAME_DISP "nx-disp" +#define DEV_NAME_LCD "nx-lcd" +#define DEV_NAME_LVDS "nx-lvds" +#define DEV_NAME_HDMI "nx-hdmi" +#define DEV_NAME_RESCONV "nx-resconv" +#define DEV_NAME_MIPI "nx-mipi" +#define DEV_NAME_PCM "nx-pcm" +#define DEV_NAME_I2S "nx-i2s" +#define DEV_NAME_SPDIF_TX "nx-spdif-tx" +#define DEV_NAME_SPDIF_RX "nx-spdif-rx" +#define DEV_NAME_I2C "nx-i2c" +#define DEV_NAME_NAND "nx-nand" +#define DEV_NAME_KEYPAD "nx-keypad" +#define DEV_NAME_SDHC "nx-sdhc" +#define DEV_NAME_PWM "nx-pwm" +#define DEV_NAME_TIMER "nx-timer" +#define DEV_NAME_SOC_PWM "nx-soc-pwm" +#define DEV_NAME_GPIO "nx-gpio" +#define DEV_NAME_RTC "nx-rtc" +#define DEV_NAME_GMAC "nx-gmac" +#define DEV_NAME_MPEGTSI "nx-mpegtsi" +#define DEV_NAME_MALI "nx-mali" +#define DEV_NAME_DIT "nx-deinterlace" +#define DEV_NAME_PPM "nx-ppm" +#define DEV_NAME_VIP "nx-vip" +#define DEV_NAME_CODA "nx-coda" +#define DEV_NAME_USB2HOST "nx-usb2h" +#define DEV_NAME_CRYPTO "nx-crypto" +#define DEV_NAME_SCALER "nx-scaler" +#define DEV_NAME_PDM "nx-pdm" +#define DEV_NAME_SPI "nx-spi" +#define DEV_NAME_CPUFREQ "nx-cpufreq" + +/* + * clock generator + */ +#define CORECLK_NAME_PLL0 "pll0" /* cpu clock */ +#define CORECLK_NAME_PLL1 "pll1" +#define CORECLK_NAME_PLL2 "pll2" +#define CORECLK_NAME_PLL3 "pll3" +#define CORECLK_NAME_FCLK "fclk" +#define CORECLK_NAME_MCLK "mclk" +#define CORECLK_NAME_BCLK "bclk" +#define CORECLK_NAME_PCLK "pclk" +#define CORECLK_NAME_HCLK "hclk" + +#define CORECLK_ID_PLL0 0 +#define CORECLK_ID_PLL1 1 +#define CORECLK_ID_PLL2 2 +#define CORECLK_ID_PLL3 3 +#define CORECLK_ID_FCLK 4 +#define CORECLK_ID_MCLK 5 +#define CORECLK_ID_BCLK 6 +#define CORECLK_ID_PCLK 7 +#define CORECLK_ID_HCLK 8 + +#define ALIVEPWRGATEREG (PHY_BASEADDR_ALIVE + 0x0) + +#if defined(CONFIG_ARCH_S5P4418) +#define SCR_ARM_SECOND_BOOT (0xC0010C1C) /* PWR scratch */ +#define SCR_ARM_SECOND_BOOT_REG1 (0xc0010234) /* ToDo : Check Address */ +#elif defined(CONFIG_ARCH_S5P6818) +#define SCR_ARM_SECOND_BOOT (0xc0010230) /* PWR scratch */ +#define SCR_ARM_SECOND_BOOT_REG1 (0xc0010234) /* PWR scratch */ +#define SCR_ARM_SECOND_BOOT_REG2 (0xc0010238) /* PWR scratch */ +#endif + +#define SCR_ALIVE_BASE (PHY_BASEADDR_ALIVE) +#define SCR_SIGNAGURE_RESET (SCR_ALIVE_BASE + 0x068) +#define SCR_SIGNAGURE_SET (SCR_ALIVE_BASE + 0x06C) +#define SCR_SIGNAGURE_READ (SCR_ALIVE_BASE + 0x070) + +#define SYSRSTCONFIG (0x23C) +#define DEVICEBOOTINFO (0x50) +#define BOOTMODE_MASK (0x7) +#define BOOTMODE_SDMMC 5 +#define BOOTMODE_USB 6 +#define BOOTMODE_SDMMC_PORT_VAL(x) ((((x) >> 3) & 1) | \ + (((x) >> 19 & 1) << 1)) +#define EMMC_PORT_NUM 2 +#define SD_PORT_NUM 0 +#define ID_REG_EC0 (0x54) +#define WIRE0_MASK (0x1) + +#ifndef __ASSEMBLY__ + +#define NS_IN_HZ (1000000000UL) +#define TO_PERIOD_NS(freq) (NS_IN_HZ / (freq)) +#define TO_DUTY_NS(duty, freq) (duty ? TO_PERIOD_NS(freq) / (100 / duty) : 0) + +#endif /* __ASSEMBLY__ */ + +#endif /* __NEXELL_H__ */ diff --git a/arch/arm/mach-nexell/include/mach/nx_gpio.h b/arch/arm/mach-nexell/include/mach/nx_gpio.h new file mode 100644 index 0000000..91803d2 --- /dev/null +++ b/arch/arm/mach-nexell/include/mach/nx_gpio.h @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: GPL-2.0+ + * + * (C) Copyright 2016 Nexell + * Youngbok, Park ybpark@nexell.co.kr + */ + +#include <linux/types.h> +#include <asm/io.h> + +#ifndef __nx_gpio_h__ +#define __nx_gpio_h__ + +struct nx_gpio_register_set { + u32 gpioxout; + u32 gpioxoutenb; + u32 gpioxdetmode[2]; + u32 gpioxintenb; + u32 gpioxdet; + u32 gpioxpad; + u32 gpioxpuenb; + u32 gpioxaltfn[2]; + u32 gpioxdetmodeex; + u32 __reserved[4]; + u32 gpioxdetenb; + u32 gpiox_slew; + u32 gpiox_slew_disable_default; + u32 gpiox_drv1; + u32 gpiox_drv1_disable_default; + u32 gpiox_drv0; + u32 gpiox_drv0_disable_default; + u32 gpiox_pullsel; + u32 gpiox_pullsel_disable_default; + u32 gpiox_pullenb; + u32 gpiox_pullenb_disable_default; + u32 gpiox_input_mux_select0; + u32 gpiox_input_mux_select1; + u8 __reserved1[0x1000 - 0x70]; +}; + +enum { + nx_gpio_padfunc_0 = 0ul, + nx_gpio_padfunc_1 = 1ul, + nx_gpio_padfunc_2 = 2ul, + nx_gpio_padfunc_3 = 3ul +}; + +enum { + nx_gpio_drvstrength_0 = 0ul, + nx_gpio_drvstrength_1 = 1ul, + nx_gpio_drvstrength_2 = 2ul, + nx_gpio_drvstrength_3 = 3ul +}; + +enum { + nx_gpio_pull_down = 0ul, + nx_gpio_pull_up = 1ul, + nx_gpio_pull_off = 2ul +}; + +int nx_gpio_initialize(void); +u32 nx_gpio_get_number_of_module(void); +u32 nx_gpio_get_size_of_register_set(void); +void nx_gpio_set_base_address(u32 module_index, void *base_address); +void *nx_gpio_get_base_address(u32 module_index); +int nx_gpio_open_module(u32 module_index); +int nx_gpio_close_module(u32 module_index); +int nx_gpio_check_busy(u32 module_index); +void nx_gpio_set_detect_enable(u32 module_index, u32 bit_number, + int detect_enb); +void nx_gpio_set_pad_function(u32 module_index, u32 bit_number, u32 padfunc); +void nx_gpio_set_pad_function32(u32 module_index, u32 msbvalue, u32 lsbvalue); +int nx_gpio_get_pad_function(u32 module_index, u32 bit_number); +void nx_gpio_set_output_enable(u32 module_index, u32 bit_number, + int output_enb); +int nx_gpio_get_detect_enable(u32 module_index, u32 bit_number); +u32 nx_gpio_get_detect_enable32(u32 module_index); +void nx_gpio_set_detect_enable(u32 module_index, u32 bit_number, + int detect_enb); +void nx_gpio_set_detect_enable32(u32 module_index, u32 enable_flag); +int nx_gpio_get_output_enable(u32 module_index, u32 bit_number); +void nx_gpio_set_output_enable32(u32 module_index, int output_enb); +u32 nx_gpio_get_output_enable32(u32 module_index); +void nx_gpio_set_output_value(u32 module_index, u32 bit_number, int value); +int nx_gpio_get_output_value(u32 module_index, u32 bit_number); +void nx_gpio_set_output_value32(u32 module_index, u32 value); +u32 nx_gpio_get_output_value32(u32 module_index); +int nx_gpio_get_input_value(u32 module_index, u32 bit_number); +void nx_gpio_set_pull_select(u32 module_index, u32 bit_number, int enable); +void nx_gpio_set_pull_select32(u32 module_index, u32 value); +int nx_gpio_get_pull_select(u32 module_index, u32 bit_number); +u32 nx_gpio_get_pull_select32(u32 module_index); +void nx_gpio_set_pull_mode(u32 module_index, u32 bit_number, u32 mode); +void nx_gpio_set_fast_slew(u32 module_index, u32 bit_number, int enable); +void nx_gpio_set_drive_strength_disable_default(u32 module_index, + u32 bit_number, int enable); +void nx_gpio_set_drive_strength_disable_default(u32 module_index, + u32 bit_number, int enable); +void nx_gpio_set_drive_strength(u32 module_index, u32 bit_number, + u32 drvstrength); +void nx_gpio_set_drive_strength_disable_default(u32 module_index, + u32 bit_number, int enable); +u32 nx_gpio_get_drive_strength(u32 module_index, u32 bit_number); +#endif diff --git a/arch/arm/mach-nexell/include/mach/reset.h b/arch/arm/mach-nexell/include/mach/reset.h new file mode 100644 index 0000000..e1301d4 --- /dev/null +++ b/arch/arm/mach-nexell/include/mach/reset.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0+ + * + * (C) Copyright 2016 Nexell + * Youngbok, Park ybpark@nexell.co.kr + */ + +#ifndef __NEXELL_RESET__ +#define __NEXELL_RESET__ + +#define NUMBER_OF_RESET_MODULE_PIN 69 + +enum rstcon { + RSTCON_ASSERT = 0UL, + RSTCON_NEGATE = 1UL +}; + +void nx_rstcon_setrst(u32 rstindex, enum rstcon status); + +#endif /* __NEXELL_RESET__ */ diff --git a/arch/arm/mach-nexell/include/mach/sec_reg.h b/arch/arm/mach-nexell/include/mach/sec_reg.h new file mode 100644 index 0000000..e3ae5ac --- /dev/null +++ b/arch/arm/mach-nexell/include/mach/sec_reg.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ + * + * (C) Copyright 2016 Nexell + * Youngbok, Park park@nexell.co.kr + */ + +#define NEXELL_L2C_SEC_ID 0 +#define NEXELL_MALI_SEC_ID 2 +#define NEXELL_MIPI_SEC_ID 4 +#define NEXELL_TOFF_SEC_ID 6 + +int write_sec_reg_by_id(void __iomem *reg, int val, int id); +int read_sec_reg_by_id(void __iomem *reg, int id); +int read_sec_reg(void __iomem *reg); +int write_sec_reg(void __iomem *reg, int val); diff --git a/arch/arm/mach-nexell/include/mach/tieoff.h b/arch/arm/mach-nexell/include/mach/tieoff.h new file mode 100644 index 0000000..70e9652 --- /dev/null +++ b/arch/arm/mach-nexell/include/mach/tieoff.h @@ -0,0 +1,423 @@ +/* SPDX-License-Identifier: GPL-2.0+ + * + * (C) Copyright 2016 Nexell + * Youngbok, Park park@nexell.co.kr + */ + +#ifndef _NEXELL_TIEOFF_H +#define _NEXELL_TIEOFF_H + +void nx_tieoff_set(u32 tieoff_index, u32 tieoff_value); +u32 nx_tieoff_get(u32 tieoff_index); + +#if defined(CONFIG_ARCH_S5P4418) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCOREOUT ((1 << 16) | 0) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCPU0 ((1 << 16) | 1) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCPU1 ((1 << 16) | 2) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCPU2 ((1 << 16) | 3) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPCPU3 ((1 << 16) | 4) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_COREPWRDOWN ((1 << 16) | 5) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPU0PWRDOWN ((1 << 16) | 6) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPU1PWRDOWN ((1 << 16) | 7) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPU2PWRDOWN ((1 << 16) | 8) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPU3PWRDOWN ((1 << 16) | 9) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2_CFGENDIAN ((1 << 16) | 10) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L1EMAS ((1 << 16) | 11) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2RET1N_0 ((1 << 16) | 12) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2RET1N_1 ((1 << 16) | 13) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2PGEN_0 ((1 << 16) | 14) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2PGEN_1 ((1 << 16) | 15) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPL2_0 ((1 << 16) | 16) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CLAMPL2_1 ((1 << 16) | 17) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_VINITHI ((4 << 16) | 18) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2EMA ((3 << 16) | 22) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_TEINIT ((4 << 16) | 25) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L1EMAW ((2 << 16) | 29) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2EMAW ((2 << 16) | 32) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L1EMA ((3 << 16) | 34) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_CPUCLKOFF ((4 << 16) | 37) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_PWRCTLI0 ((2 << 16) | 41) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_PWRCTLI1 ((2 << 16) | 43) +#define NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_PWRCTLI2 ((2 << 16) | 45) +#elif defined(CONFIG_ARCH_S5P6818) +#define NX_TIEOFF_MMC_8BIT ((1 << 16) | 5) +#endif +#define NX_TIEOFF_AXISRAM0_i_TIE_ra2w_EMAA ((3 << 16) | 47) +#define NX_TIEOFF_AXISRAM0_i_TIE_ra2w_EMAB ((3 << 16) | 50) +#define NX_TIEOFF_AXISRAM0_i_TIE_ra2w_EMAWA ((2 << 16) | 53) +#define NX_TIEOFF_AXISRAM0_i_TIE_ra2w_EMAWB ((2 << 16) | 55) +#define NX_TIEOFF_AXISRAM0_i_nPowerDown ((1 << 16) | 57) +#define NX_TIEOFF_AXISRAM0_i_nSleep ((1 << 16) | 58) +#define NX_TIEOFF_CAN0_i_TIE_rf1_EMA ((3 << 16) | 59) +#define NX_TIEOFF_CAN0_i_TIE_rf1_EMAW ((2 << 16) | 62) +#define NX_TIEOFF_CAN0_i_nPowerDown ((1 << 16) | 64) +#define NX_TIEOFF_CAN0_i_nSleep ((1 << 16) | 65) +#define NX_TIEOFF_CAN1_i_TIE_rf1_EMA ((3 << 16) | 66) +#define NX_TIEOFF_CAN1_i_TIE_rf1_EMAW ((2 << 16) | 69) +#define NX_TIEOFF_CAN1_i_nPowerDown ((1 << 16) | 71) +#define NX_TIEOFF_CAN1_i_nSleep ((1 << 16) | 72) +#define NX_TIEOFF_DEINTERLACE0_i_NX_RF1_EMA ((3 << 16) | 73) +#define NX_TIEOFF_DEINTERLACE0_i_NX_RF1_EMAW ((2 << 16) | 76) +#define NX_TIEOFF_DEINTERLACE0_i_NX_RF2_EMAA ((3 << 16) | 78) +#define NX_TIEOFF_DEINTERLACE0_i_NX_RF2_EMAB ((3 << 16) | 81) +#define NX_TIEOFF_DEINTERLACE0_i_NX_RF2W_EMAA ((3 << 16) | 84) +#define NX_TIEOFF_DEINTERLACE0_i_NX_RF2W_EMAB ((3 << 16) | 87) +#define NX_TIEOFF_DISPLAYTOP0_i_ResConv_nPowerDown ((1 << 16) | 90) +#define NX_TIEOFF_DISPLAYTOP0_i_ResConv_nSleep ((1 << 16) | 91) +#define NX_TIEOFF_DISPLAYTOP0_i_HDMI_nPowerDown ((2 << 16) | 92) +#define NX_TIEOFF_DISPLAYTOP0_i_HDMI_nSleep ((2 << 16) | 94) +#define NX_TIEOFF_DISPLAYTOP0_i_HDMI_PHY_REFCLK_SEL ((1 << 16) | 96) +#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_SPSRAM_EMA ((3 << 16) | 97) +#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_SPSRAM_EMAW ((2 << 16) | 100) +#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_1R1W_EMAA ((3 << 16) | 102) +#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_1R1W_EMAB ((3 << 16) | 105) +#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_EMAA ((3 << 16) | 108) +#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_EMAB ((3 << 16) | 111) +#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_EMAWA ((2 << 16) | 114) +#define NX_TIEOFF_DISPLAYTOP0_i_TIEOFF_DPSRAM_EMAWB ((2 << 16) | 116) +#define NX_TIEOFF_MCUSTOP0_i_vrom_EMA ((3 << 16) | 118) +#define NX_TIEOFF_DREX0_CKE_INIT ((1 << 16) | 121) +#define NX_TIEOFF_DREX0_CA_SWAP ((1 << 16) | 122) +#define NX_TIEOFF_DREX0_CSYSREQ ((1 << 16) | 123) +#define NX_TIEOFF_DREX0_PAUSE_REQ ((1 << 16) | 124) +#define NX_TIEOFF_DREX0_PEREV_TRIGGER ((1 << 16) | 125) +#define NX_TIEOFF_DREX0_CTRL_HCKE ((1 << 16) | 126) +#define NX_TIEOFF_DREX0_DFI_RESET_N_P0 ((1 << 16) | 127) +#define NX_TIEOFF_DREX0_DFI_RESET_N_P1 ((1 << 16) | 128) +#define NX_TIEOFF_MIPI0_NX_DPSRAM_1R1W_EMAA ((3 << 16) | 129) +#define NX_TIEOFF_MIPI0_NX_DPSRAM_1R1W_EMAB ((3 << 16) | 132) +#define NX_TIEOFF_MIPI0_i_NX_NPOWERDOWN ((4 << 16) | 135) +#define NX_TIEOFF_MIPI0_i_NX_NSLEEP ((4 << 16) | 139) +#define NX_TIEOFF_SCALER0_i_NX_EMA ((3 << 16) | 143) +#define NX_TIEOFF_SCALER0_i_NX_EMAW ((2 << 16) | 146) +#define NX_TIEOFF_UART0_USESMC ((1 << 16) | 148) +#define NX_TIEOFF_UART0_SMCTXENB ((1 << 16) | 149) +#define NX_TIEOFF_UART0_SMCRXENB ((1 << 16) | 150) +#define NX_TIEOFF_UART1_USESMC ((1 << 16) | 151) +#define NX_TIEOFF_UART1_SMCTXENB ((1 << 16) | 152) +#define NX_TIEOFF_UART1_SMCRXENB ((1 << 16) | 153) +#define NX_TIEOFF_UART2_USESMC ((1 << 16) | 154) +#define NX_TIEOFF_UART2_SMCTXENB ((1 << 16) | 155) +#define NX_TIEOFF_UART2_SMCRXENB ((1 << 16) | 156) +#define NX_TIEOFF_UART3_USESMC ((1 << 16) | 157) +#define NX_TIEOFF_UART3_SMCTXENB ((1 << 16) | 158) +#define NX_TIEOFF_UART3_SMCRXENB ((1 << 16) | 159) +#define NX_TIEOFF_UART4_USESMC ((1 << 16) | 160) +#define NX_TIEOFF_UART4_SMCTXENB ((1 << 16) | 161) +#define NX_TIEOFF_UART4_SMCRXENB ((1 << 16) | 162) +#define NX_TIEOFF_UART5_USESMC ((1 << 16) | 163) +#define NX_TIEOFF_UART5_SMCTXENB ((1 << 16) | 164) +#define NX_TIEOFF_UART5_SMCRXENB ((1 << 16) | 165) +#define NX_TIEOFF_USB20HOST0_i_nPowerDown ((1 << 16) | 166) +#define NX_TIEOFF_USB20HOST0_i_nSleep ((1 << 16) | 167) +#define NX_TIEOFF_USB20HOST0_i_NX_RF1_EMA ((3 << 16) | 168) +#define NX_TIEOFF_USB20HOST0_i_NX_RF1_EMAW ((2 << 16) | 171) +#define NX_TIEOFF_USB20HOST0_sys_interrupt_i ((1 << 16) | 173) +#define NX_TIEOFF_USB20HOST0_i_hsic_en ((3 << 16) | 174) +#define NX_TIEOFF_USB20HOST0_i_nResetSync ((1 << 16) | 177) +#define NX_TIEOFF_USB20HOST0_i_nResetSync_ohci ((1 << 16) | 178) +#define NX_TIEOFF_USB20HOST0_i_nAuxWellResetSync ((1 << 16) | 179) +#define NX_TIEOFF_USB20HOST0_i_nHostPhyResetSync ((1 << 16) | 180) +#define NX_TIEOFF_USB20HOST0_i_nHostUtmiResetSync ((1 << 16) | 181) +#define NX_TIEOFF_USB20HOST0_i_nHostHsicResetSync ((1 << 16) | 182) +#define NX_TIEOFF_USB20HOST0_i_HSIC_FREE_CLOCK_ENB ((1 << 16) | 183) +#define NX_TIEOFF_USB20HOST0_i_HSIC_480M_FROM_OTG_PHY ((1 << 16) | 184) +#define NX_TIEOFF_USB20HOST0_ss_word_if_enb_i ((1 << 16) | 185) +#define NX_TIEOFF_USB20HOST0_ss_word_if_i ((1 << 16) | 186) +#define NX_TIEOFF_USB20HOST0_ss_utmi_backward_enb_i ((1 << 16) | 187) +#define NX_TIEOFF_USB20HOST0_ss_resume_utmi_pls_dis_i ((1 << 16) | 188) +#define NX_TIEOFF_USB20HOST0_phy_vstatus_0_i ((3 << 16) | 189) +#define NX_TIEOFF_USB20HOST0_phy_vstatus_1_i ((3 << 16) | 192) +#define NX_TIEOFF_USB20HOST0_phy_vstatus_2_i ((3 << 16) | 195) +#define NX_TIEOFF_USB20HOST0_phy_vstatus_3_i ((3 << 16) | 198) +#define NX_TIEOFF_USB20HOST0_phy_vstatus_4_i ((3 << 16) | 201) +#define NX_TIEOFF_USB20HOST0_phy_vstatus_5_i ((3 << 16) | 204) +#define NX_TIEOFF_USB20HOST0_phy_vstatus_6_i ((3 << 16) | 207) +#define NX_TIEOFF_USB20HOST0_phy_vstatus_7_i ((3 << 16) | 210) +#define NX_TIEOFF_USB20HOST0_ss_power_state_valid_i ((1 << 16) | 213) +#define NX_TIEOFF_USB20HOST0_ss_nxt_power_state_valid_i ((1 << 16) | 214) +#define NX_TIEOFF_USB20HOST0_ss_power_state_i ((2 << 16) | 215) +#define NX_TIEOFF_USB20HOST0_ss_next_power_state_i ((2 << 16) | 217) +#define NX_TIEOFF_USB20HOST0_app_prt_ovrcur_i ((3 << 16) | 219) +#define NX_TIEOFF_USB20HOST0_ss_simulation_mode_i ((1 << 16) | 222) +#define NX_TIEOFF_USB20HOST0_ss_fladj_val_host_i ((6 << 16) | 224) +#define NX_TIEOFF_USB20HOST0_ss_fladj_val_5_i ((3 << 16) | 230) +#define NX_TIEOFF_USB20HOST0_ss_fladj_val_4_i ((3 << 16) | 233) +#define NX_TIEOFF_USB20HOST0_ss_fladj_val_3_i ((3 << 16) | 236) +#define NX_TIEOFF_USB20HOST0_ss_fladj_val_2_i ((3 << 16) | 239) +#define NX_TIEOFF_USB20HOST0_ss_fladj_val_1_i ((3 << 16) | 242) +#define NX_TIEOFF_USB20HOST0_ss_fladj_val_0_i ((3 << 16) | 245) +#define NX_TIEOFF_USB20HOST0_ss_autoppd_on_overcur_en_i ((1 << 16) | 248) +#define NX_TIEOFF_USB20HOST0_ss_ena_incr16_i ((1 << 16) | 249) +#define NX_TIEOFF_USB20HOST0_ss_ena_incr8_i ((1 << 16) | 250) +#define NX_TIEOFF_USB20HOST0_ss_ena_incr4_i ((1 << 16) | 251) +#define NX_TIEOFF_USB20HOST0_ss_ena_incrx_align_i ((1 << 16) | 252) +#define NX_TIEOFF_USB20HOST0_i_ohci_0_cntsel_n ((1 << 16) | 253) +#define NX_TIEOFF_USB20HOST0_ohci_0_app_irq1_i ((1 << 16) | 254) +#define NX_TIEOFF_USB20HOST0_ohci_0_app_irq12_i ((1 << 16) | 255) +#define NX_TIEOFF_USB20HOST0_ohci_0_app_io_hit_i ((1 << 16) | 256) +#define NX_TIEOFF_USB20HOST0_ss_hubsetup_min_i ((1 << 16) | 257) +#define NX_TIEOFF_USB20HOST0_app_start_clk_i ((1 << 16) | 258) +#define NX_TIEOFF_USB20HOST0_ohci_susp_lgcy_i ((1 << 16) | 259) +#define NX_TIEOFF_USB20HOST0_i_SIDDQ ((1 << 16) | 260) +#define NX_TIEOFF_USB20HOST0_i_VATESTENB ((2 << 16) | 261) +#define NX_TIEOFF_USB20HOST0_i_POR_ENB ((1 << 16) | 263) +#define NX_TIEOFF_USB20HOST0_i_POR ((1 << 16) | 264) +#define NX_TIEOFF_USB20HOST0_i_REFCLKSEL ((2 << 16) | 265) +#define NX_TIEOFF_USB20HOST0_i_FSEL ((3 << 16) | 267) +#define NX_TIEOFF_USB20HOST0_i_COMMONONN ((1 << 16) | 270) +#define NX_TIEOFF_USB20HOST0_i_RESREQIN ((1 << 16) | 271) +#define NX_TIEOFF_USB20HOST0_i_PORTRESET ((1 << 16) | 272) +#define NX_TIEOFF_USB20HOST0_i_OTGDISABLE ((1 << 16) | 273) +#define NX_TIEOFF_USB20HOST0_i_LOOPBACKENB ((1 << 16) | 274) +#define NX_TIEOFF_USB20HOST0_i_IDPULLUPi ((1 << 16) | 275) +#define NX_TIEOFF_USB20HOST0_i_DRVVBUS ((1 << 16) | 276) +#define NX_TIEOFF_USB20HOST0_i_ADPCHRG ((1 << 16) | 277) +#define NX_TIEOFF_USB20HOST0_i_ADPDISCHRG ((1 << 16) | 278) +#define NX_TIEOFF_USB20HOST0_i_ADPPRBENB ((1 << 16) | 279) +#define NX_TIEOFF_USB20HOST0_i_VBUSVLDEXT ((1 << 16) | 280) +#define NX_TIEOFF_USB20HOST0_i_VBUSVLDEXTSEL ((1 << 16) | 281) +#define NX_TIEOFF_USB20HOST0_i_DPPULLDOWN ((1 << 16) | 282) +#define NX_TIEOFF_USB20HOST0_i_DMPULLDOWN ((1 << 16) | 283) +#define NX_TIEOFF_USB20HOST0_i_SUSPENDM_ENB ((1 << 16) | 284) +#define NX_TIEOFF_USB20HOST0_i_SUSPENDM ((1 << 16) | 285) +#define NX_TIEOFF_USB20HOST0_i_SLEEPM_ENB ((1 << 16) | 286) +#define NX_TIEOFF_USB20HOST0_i_SLEEPM ((1 << 16) | 287) +#define NX_TIEOFF_USB20HOST0_i_OPMODE_ENB ((1 << 16) | 288) +#define NX_TIEOFF_USB20HOST0_i_OPMODE ((2 << 16) | 289) +#define NX_TIEOFF_USB20HOST0_i_TERMSEL_ENB ((1 << 16) | 291) +#define NX_TIEOFF_USB20HOST0_i_TERMSEL ((1 << 16) | 292) +#define NX_TIEOFF_USB20HOST0_i_XCVRSEL_ENB ((1 << 16) | 293) +#define NX_TIEOFF_USB20HOST0_i_XCVRSEL ((2 << 16) | 294) +#define NX_TIEOFF_USB20HOST0_i_WORDINTERFACE_ENB ((1 << 16) | 296) +#define NX_TIEOFF_USB20HOST0_i_WORDINTERFACE ((1 << 16) | 297) +#define NX_TIEOFF_USB20HOST0_i_TXBITSTUFFEN ((1 << 16) | 298) +#define NX_TIEOFF_USB20HOST0_i_TXBITSTUFFENH ((1 << 16) | 299) +#define NX_TIEOFF_USB20HOST0_i_BYPASSDPDATA ((1 << 16) | 300) +#define NX_TIEOFF_USB20HOST0_i_BYPASSDMDATA ((1 << 16) | 301) +#define NX_TIEOFF_USB20HOST0_i_BYPASSDPEN ((1 << 16) | 302) +#define NX_TIEOFF_USB20HOST0_i_BYPASSDMEN ((1 << 16) | 303) +#define NX_TIEOFF_USB20HOST0_i_BYPASSSEL ((1 << 16) | 304) +#define NX_TIEOFF_USB20HOST0_i_COMPDISTUNE ((3 << 16) | 305) +#define NX_TIEOFF_USB20HOST0_i_SQRXTUNE ((3 << 16) | 308) +#define NX_TIEOFF_USB20HOST0_i_OTGTUNE ((3 << 16) | 311) +#define NX_TIEOFF_USB20HOST0_i_TXHSXVTUNE ((2 << 16) | 314) +#define NX_TIEOFF_USB20HOST0_i_TXFSLSTUNE ((4 << 16) | 316) +#define NX_TIEOFF_USB20HOST0_i_TXVREFTUNE ((4 << 16) | 320) +#define NX_TIEOFF_USB20HOST0_i_TXRISETUNE ((2 << 16) | 324) +#define NX_TIEOFF_USB20HOST0_i_TXRESTUNE ((2 << 16) | 326) +#define NX_TIEOFF_USB20HOST0_i_TXPREEMPAMPTUNE ((2 << 16) | 328) +#define NX_TIEOFF_USB20HOST0_i_TXPREEMPPULSETUNE ((1 << 16) | 330) +#define NX_TIEOFF_USB20HOST0_i_CHRGSEL ((1 << 16) | 331) +#define NX_TIEOFF_USB20HOST0_i_VDATDETENB ((1 << 16) | 332) +#define NX_TIEOFF_USB20HOST0_i_VDATSRCENB ((1 << 16) | 333) +#define NX_TIEOFF_USB20HOST0_i_DCDENB ((1 << 16) | 334) +#define NX_TIEOFF_USB20HOST0_i_ACAENB ((1 << 16) | 335) +#define NX_TIEOFF_USB20HOST0_i_HSIC_MSTRXCVR ((1 << 16) | 336) +#define NX_TIEOFF_USB20HOST0_i_HSIC_SIDDQ ((1 << 16) | 337) +#define NX_TIEOFF_USB20HOST0_i_HSIC_POR_ENB ((1 << 16) | 338) +#define NX_TIEOFF_USB20HOST0_i_HSIC_POR ((1 << 16) | 339) +#define NX_TIEOFF_USB20HOST0_i_HSIC_REFCLKDIV ((7 << 16) | 340) +#define NX_TIEOFF_USB20HOST0_i_HSIC_REFCLKSEL ((2 << 16) | 347) +#define NX_TIEOFF_USB20HOST0_i_HSIC_COMMONONN ((1 << 16) | 349) +#define NX_TIEOFF_USB20HOST0_i_HSIC_PORTRESET ((1 << 16) | 350) +#define NX_TIEOFF_USB20HOST0_i_HSIC_LOOPBACKENB ((1 << 16) | 351) +#define NX_TIEOFF_USB20HOST0_i_HSIC_DPPULLDOWN ((1 << 16) | 352) +#define NX_TIEOFF_USB20HOST0_i_HSIC_DMPULLDOWN ((1 << 16) | 353) +#define NX_TIEOFF_USB20HOST0_i_HSIC_SUSPENDM_ENB ((1 << 16) | 354) +#define NX_TIEOFF_USB20HOST0_i_HSIC_SUSPENDM ((1 << 16) | 355) +#define NX_TIEOFF_USB20HOST0_i_HSIC_SLEEPM_ENB ((1 << 16) | 356) +#define NX_TIEOFF_USB20HOST0_i_HSIC_SLEEPM ((1 << 16) | 357) +#define NX_TIEOFF_USB20HOST0_i_HSIC_MSTRXOPU ((1 << 16) | 358) +#define NX_TIEOFF_USB20HOST0_i_HSIC_OPMODE_ENB ((1 << 16) | 359) +#define NX_TIEOFF_USB20HOST0_i_HSIC_OPMODE ((2 << 16) | 360) +#define NX_TIEOFF_USB20HOST0_i_HSIC_XCVRSELECT_ENB ((1 << 16) | 362) +#define NX_TIEOFF_USB20HOST0_i_HSIC_XCVRSELECT ((1 << 16) | 363) +#define NX_TIEOFF_USB20HOST0_i_HSIC_WORDINTERFACE_ENB ((1 << 16) | 364) +#define NX_TIEOFF_USB20HOST0_i_HSIC_WORDINTERFACE ((1 << 16) | 365) +#define NX_TIEOFF_USB20HOST0_i_HSIC_TXBITSTUFFEN ((1 << 16) | 366) +#define NX_TIEOFF_USB20HOST0_i_HSIC_TXBITSTUFFENH ((1 << 16) | 367) +#define NX_TIEOFF_USB20HOST0_i_HSIC_TXRPUTUNE ((2 << 16) | 368) +#define NX_TIEOFF_USB20HOST0_i_HSIC_TXRPDTUNE ((2 << 16) | 370) +#define NX_TIEOFF_USB20HOST0_i_HSIC_TXSRTUNE ((4 << 16) | 372) +#define NX_TIEOFF_USB20OTG0_i_nPowerDown ((1 << 16) | 376) +#define NX_TIEOFF_USB20OTG0_i_nSleep ((1 << 16) | 377) +#define NX_TIEOFF_USB20OTG0_i_NX_RF1_EMA ((3 << 16) | 378) +#define NX_TIEOFF_USB20OTG0_i_NX_RF1_EMAW ((2 << 16) | 381) +#define NX_TIEOFF_USB20OTG0_i_ss_scaledown_mode ((2 << 16) | 384) +#define NX_TIEOFF_USB20OTG0_i_gp_in ((16 << 16) | 386) +#define NX_TIEOFF_USB20OTG0_i_sof_count ((14 << 16) | 402) +#define NX_TIEOFF_USB20OTG0_i_sys_dma_done ((1 << 16) | 416) +#define NX_TIEOFF_USB20OTG0_i_if_select_hsic ((1 << 16) | 417) +#define NX_TIEOFF_USB20OTG0_i_nResetSync ((1 << 16) | 418) +#define NX_TIEOFF_USB20OTG0_i_nUtmiResetSync ((1 << 16) | 419) +#define NX_TIEOFF_USB20OTG0_i_SIDDQ ((1 << 16) | 420) +#define NX_TIEOFF_USB20OTG0_i_VATESTENB ((2 << 16) | 421) +#define NX_TIEOFF_USB20OTG0_i_POR_ENB ((1 << 16) | 423) +#define NX_TIEOFF_USB20OTG0_i_POR ((1 << 16) | 424) +#define NX_TIEOFF_USB20OTG0_i_REFCLKSEL ((2 << 16) | 425) +#define NX_TIEOFF_USB20OTG0_i_FSEL ((3 << 16) | 427) +#define NX_TIEOFF_USB20OTG0_i_COMMONONN ((1 << 16) | 430) +#define NX_TIEOFF_USB20OTG0_i_RESREQIN ((1 << 16) | 431) +#define NX_TIEOFF_USB20OTG0_i_PORTRESET ((1 << 16) | 432) +#define NX_TIEOFF_USB20OTG0_i_OTGDISABLE ((1 << 16) | 433) +#define NX_TIEOFF_USB20OTG0_i_LOOPBACKENB ((1 << 16) | 434) +#define NX_TIEOFF_USB20OTG0_i_IDPULLUP ((1 << 16) | 435) +#define NX_TIEOFF_USB20OTG0_i_DRVVBUS ((1 << 16) | 436) +#define NX_TIEOFF_USB20OTG0_i_ADPCHRG ((1 << 16) | 437) +#define NX_TIEOFF_USB20OTG0_i_ADPDISCHRG ((1 << 16) | 438) +#define NX_TIEOFF_USB20OTG0_i_ADPPRBENB ((1 << 16) | 439) +#define NX_TIEOFF_USB20OTG0_i_VBUSVLDEXT ((1 << 16) | 440) +#define NX_TIEOFF_USB20OTG0_i_VBUSVLDEXTSEL ((1 << 16) | 441) +#define NX_TIEOFF_USB20OTG0_i_DPPULLDOWN ((1 << 16) | 442) +#define NX_TIEOFF_USB20OTG0_i_DMPULLDOWN ((1 << 16) | 443) +#define NX_TIEOFF_USB20OTG0_i_SUSPENDM_ENB ((1 << 16) | 444) +#define NX_TIEOFF_USB20OTG0_i_SUSPENDM ((1 << 16) | 445) +#define NX_TIEOFF_USB20OTG0_i_SLEEPM_ENB ((1 << 16) | 446) +#define NX_TIEOFF_USB20OTG0_i_SLEEPM ((1 << 16) | 447) +#define NX_TIEOFF_USB20OTG0_i_OPMODE_ENB ((1 << 16) | 448) +#define NX_TIEOFF_USB20OTG0_i_OPMODE ((2 << 16) | 449) +#define NX_TIEOFF_USB20OTG0_i_TERMSEL_ENB ((1 << 16) | 451) +#define NX_TIEOFF_USB20OTG0_i_TERMSEL ((1 << 16) | 452) +#define NX_TIEOFF_USB20OTG0_i_XCVRSEL_ENB ((1 << 16) | 453) +#define NX_TIEOFF_USB20OTG0_i_XCVRSEL ((2 << 16) | 454) +#define NX_TIEOFF_USB20OTG0_i_WORDINTERFACE_ENB ((1 << 16) | 456) +#define NX_TIEOFF_USB20OTG0_i_WORDINTERFACE ((1 << 16) | 457) +#define NX_TIEOFF_USB20OTG0_i_TXBITSTUFFEN ((1 << 16) | 458) +#define NX_TIEOFF_USB20OTG0_i_TXBITSTUFFENH ((1 << 16) | 459) +#define NX_TIEOFF_USB20OTG0_i_BYPASSDPDATA ((1 << 16) | 460) +#define NX_TIEOFF_USB20OTG0_i_BYPASSDMDATA ((1 << 16) | 461) +#define NX_TIEOFF_USB20OTG0_i_BYPASSDPEN ((1 << 16) | 462) +#define NX_TIEOFF_USB20OTG0_i_BYPASSDMEN ((1 << 16) | 463) +#define NX_TIEOFF_USB20OTG0_i_BYPASSSEL ((1 << 16) | 464) +#define NX_TIEOFF_USB20OTG0_i_COMPDISTUNE ((3 << 16) | 465) +#define NX_TIEOFF_USB20OTG0_i_SQRXTUNE ((3 << 16) | 468) +#define NX_TIEOFF_USB20OTG0_i_OTGTUNE ((3 << 16) | 471) +#define NX_TIEOFF_USB20OTG0_i_TXHSXVTUNE ((2 << 16) | 474) +#define NX_TIEOFF_USB20OTG0_i_TXFSLSTUNE ((4 << 16) | 476) +#define NX_TIEOFF_USB20OTG0_i_TXVREFTUNE ((4 << 16) | 480) +#define NX_TIEOFF_USB20OTG0_i_TXRISETUNE ((2 << 16) | 484) +#define NX_TIEOFF_USB20OTG0_i_TXRESTUNE ((2 << 16) | 486) +#define NX_TIEOFF_USB20OTG0_i_TXPREEMPAMPTUNE ((2 << 16) | 488) +#define NX_TIEOFF_USB20OTG0_i_TXPREEMPPULSETUNE ((1 << 16) | 490) +#define NX_TIEOFF_USB20OTG0_i_CHRGSEL ((1 << 16) | 491) +#define NX_TIEOFF_USB20OTG0_i_VDATDETENB ((1 << 16) | 492) +#define NX_TIEOFF_USB20OTG0_i_VDATSRCENB ((1 << 16) | 493) +#define NX_TIEOFF_USB20OTG0_i_DCDENB ((1 << 16) | 494) +#define NX_TIEOFF_USB20OTG0_i_ACAENB ((1 << 16) | 495) +#define NX_TIEOFF_USB20OTG0_i_IDPULLUP_ENB ((1 << 16) | 496) +#define NX_TIEOFF_USB20OTG0_i_DPPULLDOWN_ENB ((1 << 16) | 497) +#define NX_TIEOFF_USB20OTG0_i_DMPULLDOWN_ENB ((1 << 16) | 498) +#define NX_TIEOFF_USB20OTG0_i_DRVVBUS_ENB ((1 << 16) | 499) +#define NX_TIEOFF_USB20OTG0_i_LPMClkMuxCntrl ((1 << 16) | 500) +#define NX_TIEOFF_USB20OTG0_i_GLITCHLESSMUXCntrl ((1 << 16) | 501) +#define NX_TIEOFF_CODA9600_i_nPWRDN00 ((4 << 16) | 502) +#define NX_TIEOFF_CODA9600_i_nSLEEP00 ((4 << 16) | 506) +#define NX_TIEOFF_CODA9600_i_nPWRDN01 ((8 << 16) | 512) +#define NX_TIEOFF_CODA9600_i_nSLEEP01 ((8 << 16) | 520) +#define NX_TIEOFF_CODA9600_i_nPWRDN02 ((10 << 16) | 528) +#define NX_TIEOFF_CODA9600_i_nSLEEP02 ((10 << 16) | 544) +#define NX_TIEOFF_CODA9600_i_nPWRDN03 ((2 << 16) | 554) +#define NX_TIEOFF_CODA9600_i_nSLEEP03 ((2 << 16) | 556) +#define NX_TIEOFF_CODA9600_i_nPWRDN04 ((8 << 16) | 558) +#define NX_TIEOFF_CODA9600_i_nSLEEP04 ((8 << 16) | 566) +#define NX_TIEOFF_CODA9600_i_nPWRDN05 ((3 << 16) | 576) +#define NX_TIEOFF_CODA9600_i_nSLEEP05 ((3 << 16) | 579) +#define NX_TIEOFF_CODA9600_i_nPWRDN06 ((7 << 16) | 582) +#define NX_TIEOFF_CODA9600_i_nSLEEP06 ((7 << 16) | 589) +#define NX_TIEOFF_CODA9600_i_nPWRDN07 ((12 << 16) | 596) +#define NX_TIEOFF_CODA9600_i_nSLEEP07 ((12 << 16) | 608) +#define NX_TIEOFF_CODA9600_i_nPWRDN08 ((1 << 16) | 620) +#define NX_TIEOFF_CODA9600_i_nSLEEP08 ((1 << 16) | 621) +#define NX_TIEOFF_CODA9600_i_nPWRDN09 ((2 << 16) | 622) +#define NX_TIEOFF_CODA9600_i_nSLEEP09 ((2 << 16) | 624) +#define NX_TIEOFF_CODA9600_i_nPWRDN10 ((10 << 16) | 626) +#define NX_TIEOFF_CODA9600_i_nSLEEP10 ((10 << 16) | 640) +#define NX_TIEOFF_CODA9600_i_nPWRDN11 ((1 << 16) | 650) +#define NX_TIEOFF_CODA9600_i_nSLEEP11 ((1 << 16) | 651) +#define NX_TIEOFF_CODA9600_i_TIE_rf2_EMAA ((3 << 16) | 652) +#define NX_TIEOFF_CODA9600_i_TIE_rf2_EMAB ((3 << 16) | 655) +#define NX_TIEOFF_CODA9600_i_TIE_rf2w_EMAA ((3 << 16) | 658) +#define NX_TIEOFF_CODA9600_i_TIE_rf2w_EMAB ((3 << 16) | 661) +#define NX_TIEOFF_CODA9600_i_TIE_ra2_EMAA ((3 << 16) | 664) +#define NX_TIEOFF_CODA9600_i_TIE_ra2_EMAB ((3 << 16) | 667) +#define NX_TIEOFF_CODA9600_i_TIE_ra2_EMAWA ((2 << 16) | 670) +#define NX_TIEOFF_CODA9600_i_TIE_ra2_EMAWB ((2 << 16) | 672) +#define NX_TIEOFF_CODA9600_i_TIE_ra2w_EMAA ((3 << 16) | 674) +#define NX_TIEOFF_CODA9600_i_TIE_ra2w_EMAB ((3 << 16) | 677) +#define NX_TIEOFF_CODA9600_i_TIE_ra2w_EMAWA ((2 << 16) | 680) +#define NX_TIEOFF_CODA9600_i_TIE_ra2w_EMAWB ((2 << 16) | 682) +#define NX_TIEOFF_CODA9600_i_TIE_rf1_EMA ((3 << 16) | 684) +#define NX_TIEOFF_CODA9600_i_TIE_rf1_EMAW ((2 << 16) | 687) +#define NX_TIEOFF_CODA9600_i_TIE_rf1w_EMA ((3 << 16) | 689) +#define NX_TIEOFF_CODA9600_i_TIE_rf1w_EMAW ((2 << 16) | 692) +#define NX_TIEOFF_DWC_GMAC0_sbd_flowctrl_i ((1 << 16) | 694) +#define NX_TIEOFF_DWC_GMAC0_phy_intf_sel_i ((3 << 16) | 695) +#define NX_TIEOFF_DWC_GMAC0_i_NX_RF2_EMAA ((3 << 16) | 698) +#define NX_TIEOFF_DWC_GMAC0_i_NX_RF2_EMAB ((3 << 16) | 701) +#define NX_TIEOFF_MALI4000_NX_DPSRAM_1R1W_EMAA ((3 << 16) | 704) +#define NX_TIEOFF_MALI4000_NX_DPSRAM_1R1W_EMAB ((3 << 16) | 707) +#define NX_TIEOFF_MALI4000_NX_SPSRAM_EMA ((3 << 16) | 710) +#define NX_TIEOFF_MALI4000_NX_SPSRAM_EMAW ((2 << 16) | 713) +#define NX_TIEOFF_MALI4000_NX_SPSRAM_BW_EMA ((3 << 16) | 715) +#define NX_TIEOFF_MALI4000_NX_SPSRAM_BW_EMAW ((2 << 16) | 718) +#define NX_TIEOFF_MALI4000_PWRDNBYPASS ((1 << 16) | 720) +#define NX_TIEOFF_MALI4000_GP_NX_NPOWERDOWN ((15 << 16) | 721) +#define NX_TIEOFF_MALI4000_GP_NX_NSLEEP ((15 << 16) | 736) +#define NX_TIEOFF_MALI4000_L2_NX_NPOWERDOWN ((3 << 16) | 751) +#define NX_TIEOFF_MALI4000_L2_NX_NSLEEP ((3 << 16) | 754) +#define NX_TIEOFF_MALI4000_PP0_NX_NPOWERDOWN ((32 << 16) | 768) +#define NX_TIEOFF_MALI4000_PP0_NX_NSLEEP ((32 << 16) | 800) +#define NX_TIEOFF_MALI4000_PP1_NX_NPOWERDOWN ((32 << 16) | 832) +#define NX_TIEOFF_MALI4000_PP1_NX_NSLEEP ((32 << 16) | 864) +#define NX_TIEOFF_MALI4000_PP2_NX_NPOWERDOWN ((32 << 16) | 896) +#define NX_TIEOFF_MALI4000_PP2_NX_NSLEEP ((32 << 16) | 928) +#define NX_TIEOFF_MALI4000_PP3_NX_NPOWERDOWN ((32 << 16) | 960) +#define NX_TIEOFF_MALI4000_PP3_NX_NSLEEP ((32 << 16) | 992) +#define NX_TIEOFF_A3BM_AXI_PERI_BUS0_SYNCMODEREQm9 ((1 << 16) | 1024) +#define NX_TIEOFF_A3BM_AXI_PERI_BUS0_SYNCMODEREQm10 ((1 << 16) | 1025) +#define NX_TIEOFF_A3BM_AXI_PERI_BUS0_SYNCMODEREQm16 ((1 << 16) | 1026) +#define NX_TIEOFF_A3BM_AXI_TOP_MASTER_BUS0_REMAP ((2 << 16) | 1027) +#if defined(CONFIG_ARCH_S5P6818) +#define NX_TIEOFF_Inst_ARMTOP_SMPEN ((4 << 16) | 2816) +#define NX_TIEOFF_Inst_ARMTOP_STANBYWFI ((4 << 16) | 2880) +#define NX_TIEOFF_Inst_ARMTOP_STANBYWFIL2 ((1 << 16) | 2884) +#define NX_TIEOFF_Inst_ARMTOP_DBGNOPWRDWN ((4 << 16) | 2889) +#define NX_TIEOFF_Inst_ARMTOP_DBGPWRUPREQ ((4 << 16) | 2893) +#define NX_TIEOFF_Inst_ARMTOP_COREPWRDOWNPRE ((1 << 16) | 2901) +#define NX_TIEOFF_Inst_ARMTOP_CPU0PWRDOWNPRE ((1 << 16) | 2902) +#define NX_TIEOFF_Inst_ARMTOP_CPU1PWRDOWNPRE ((1 << 16) | 2903) +#define NX_TIEOFF_Inst_ARMTOP_CPU2PWRDOWNPRE ((1 << 16) | 2904) +#define NX_TIEOFF_Inst_ARMTOP_CPU3PWRDOWNPRE ((1 << 16) | 2905) +#define NX_TIEOFF_Inst_ARMTOP_COREPWRDOWNALL ((1 << 16) | 2906) +#define NX_TIEOFF_Inst_ARMTOP_CPU0PWRDOWNALL ((1 << 16) | 2907) +#define NX_TIEOFF_Inst_ARMTOP_CPU1PWRDOWNALL ((1 << 16) | 2908) +#define NX_TIEOFF_Inst_ARMTOP_CPU2PWRDOWNALL ((1 << 16) | 2909) +#define NX_TIEOFF_Inst_ARMTOP_CPU3PWRDOWNALL ((1 << 16) | 2910) +#define NX_TIEOFF_Inst_ARMTOP_CLAMPL2 ((1 << 16) | 2920) +#define NX_TIEOFF_Inst_ARMTOP_L2FLUSHREQ ((1 << 16) | 3018) +#define NX_TIEOFF_Inst_ARMTOP_L2FLUSHDONE ((1 << 16) | 3019) +#define NX_TIEOFF_Inst_ARMTOP_ACINACTM ((1 << 16) | 3023) +#define NX_TIEOFF_Inst_ARMTOP_P1_SMPEN ((4 << 16) | 3360) +#define NX_TIEOFF_Inst_ARMTOP_P1_STANBYWFI ((4 << 16) | 3424) +#define NX_TIEOFF_Inst_ARMTOP_P1_STANBYWFIL2 ((1 << 16) | 3428) +#define NX_TIEOFF_Inst_ARMTOP_P1_DBGNOPWRDWN ((4 << 16) | 3442) +#define NX_TIEOFF_Inst_ARMTOP_P1_DBGPWRUPREQ ((4 << 16) | 3443) +#define NX_TIEOFF_Inst_ARMTOP_P1_DBGPWRDUP ((4 << 16) | 3444) +#define NX_TIEOFF_Inst_ARMTOP_P1_COREPWRDOWNPRE ((1 << 16) | 3445) +#define NX_TIEOFF_Inst_ARMTOP_P1_CPU0PWRDOWNPRE ((1 << 16) | 3446) +#define NX_TIEOFF_Inst_ARMTOP_P1_CPU1PWRDOWNPRE ((1 << 16) | 3447) +#define NX_TIEOFF_Inst_ARMTOP_P1_CPU2PWRDOWNPRE ((1 << 16) | 3448) +#define NX_TIEOFF_Inst_ARMTOP_P1_CPU3PWRDOWNPRE ((1 << 16) | 3449) +#define NX_TIEOFF_Inst_ARMTOP_P1_COREPWRDOWNALL ((1 << 16) | 3450) +#define NX_TIEOFF_Inst_ARMTOP_P1_CPU0PWRDOWNALL ((1 << 16) | 3451) +#define NX_TIEOFF_Inst_ARMTOP_P1_CPU1PWRDOWNALL ((1 << 16) | 3452) +#define NX_TIEOFF_Inst_ARMTOP_P1_CPU2PWRDOWNALL ((1 << 16) | 3453) +#define NX_TIEOFF_Inst_ARMTOP_P1_CPU3PWRDOWNALL ((1 << 16) | 3454) +#define NX_TIEOFF_Inst_ARMTOP_P1_CLAMPL2 ((1 << 16) | 3464) +#define NX_TIEOFF_Inst_ARMTOP_P1_L2FLUSHREQ ((1 << 16) | 3562) +#define NX_TIEOFF_Inst_ARMTOP_P1_L2FLUSHDONE ((1 << 16) | 3563) +#define NX_TIEOFF_Inst_ARMTOP_P1_ACINACTM ((1 << 16) | 3567) +#endif + +#endif /* _NEXELL_TIEOFF_H */