Yes i am where that there is no NAND controller so did that already and i see stuff happing on my scope. I thought that i was missing something for this flash chip.

I am attaching my nand controllor code could any body tell me if i am missing something for the 405EP i am new to the 405EP processor...  But i worked on did processors that i had nand setup and it was a lot lets work.

Most cases all it was just overwrite the ready and hwcontrol functions.


Pawel

On Thu, Mar 13, 2008 at 3:38 PM, Stefan Roese <sr@denx.de> wrote:
On Thursday 13 March 2008, Pawel Pastuszak wrote:
> I trying to get nand flashing working for powerpc 405ep, i am currently
> having some problem with read and writing to the flash. I was wondering if
> anybody got the MT29F2G08 flash working.

Sure. It's working on multiple 405EP implementation I have seen so far.
Perhaps not exactly with the NAND chips you mentioned. But that shouldn't
really matter. You are aware that the 405EP doesn't have a build-in NAND
controller and you need minimal external logic to connect a NAND chip to the
405EP?

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office@denx.de
=====================================================================