--- Wolfgang Denk wd@denx.de wrote:
In message 570161.51367.qm@web7707.mail.in.yahoo.com you wrote:
My board is close to PPC405 Walnut board. But
there is slight modification in the FLASH chip and SDRAM.
close is not close enough. You have to do your own port.
-> FLASH chip on my custom board is AT49BV320C
(flash interface 16Bits). How do I add this ATMEL chip driver to the u-boot.
Is it CFI conform?
yes it Command Flash Interface only..I request someone to please throw light to comeout of this loop....
-> SDRAM controller not read from EEPROM , i
want to hardcode the values of the SDRAM using the sdram_init (i.e sdram.c) function instead of the spd_sdram.c file. Do i need to change the function implimentation init_func_ram() in the board.c file.
init_func_ram() is a static function in "lib_ppc/board.c" which you should keep your fingers off. it is not affected by a new board port.
--0-1855522460-1188986846=:51367 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: 8bit
And never post HTML on this list, please!
Best regards,
Wolfgang Denk
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de If a group of N persons implements a COBOL compiler, there will be N-1 passes. Someone in the group has to be the manager. - T. Cheatham
Bollywood, fun, friendship, sports and more. You name it, we have it on http://in.groups.yahoo.com