-----Original Message----- From: Dylan Hung dylan_hung@aspeedtech.com Sent: Tuesday, November 2, 2021 1:42 PM To: u-boot@lists.denx.de; joe.hershberger@ni.com; rfried.dev@gmail.com; Ryan Chen ryan_chen@aspeedtech.com; ChiaWei Wang chiawei_wang@aspeedtech.com Cc: BMC-SW BMC-SW@aspeedtech.com Subject: [PATCH] drivers: net: add Aspeed MDIO driver
Add a driver for the MDIO interface for Aspeed AST2600 SOC. The driver only supports clause 22 for now.
Signed-off-by: Dylan Hung dylan_hung@aspeedtech.com
Reviewed-by: Ryan Chen ryan_chen@aspeedtech.com
drivers/net/Kconfig | 7 +++ drivers/net/Makefile | 1 + drivers/net/aspeed_mdio.c | 128 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 136 insertions(+) create mode 100644 drivers/net/aspeed_mdio.c
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 6c12959f37..4638180b74 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -826,6 +826,13 @@ config FSL_LS_MDIO This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and on the mEMAC (which supports both Clauses 22 and 45).
+config ASPEED_MDIO
- bool "Aspeed MDIO interface support"
- depends on DM_MDIO
- help
This driver supports the MDIO bus of Aspeed AST2600 SOC. Thedriver
currently supports Clause 22.config MDIO_MUX_MMIOREG bool "MDIO MUX accessed as a MMIO register access" depends on DM_MDIO_MUX diff --git a/drivers/net/Makefile b/drivers/net/Makefile index e4078d15a9..fe6c00fa48 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -101,3 +101,4 @@ obj-$(CONFIG_HIGMACV300_ETH) += higmacv300.o obj-$(CONFIG_MDIO_SANDBOX) += mdio_sandbox.o obj-$(CONFIG_FSL_ENETC) += fsl_enetc.o fsl_enetc_mdio.o obj-$(CONFIG_FSL_LS_MDIO) += fsl_ls_mdio.o +obj-$(CONFIG_ASPEED_MDIO) += aspeed_mdio.o diff --git a/drivers/net/aspeed_mdio.c b/drivers/net/aspeed_mdio.c new file mode 100644 index 0000000000..a99715a728 --- /dev/null +++ b/drivers/net/aspeed_mdio.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- Aspeed MDIO driver
- (C) Copyright 2021 Aspeed Technology Inc.
- This file is inspired from the Linux kernel driver
+drivers/net/phy/mdio-aspeed.c */
+#include <common.h> +#include <dm.h> +#include <log.h> +#include <miiphy.h> +#include <net.h> +#include <reset.h> +#include <linux/bitops.h> +#include <linux/bitfield.h> +#include <linux/io.h> +#include <linux/iopoll.h>
+#define ASPEED_MDIO_CTRL 0x0 +#define ASPEED_MDIO_CTRL_FIRE BIT(31) +#define ASPEED_MDIO_CTRL_ST BIT(28) +#define ASPEED_MDIO_CTRL_ST_C45 0 +#define ASPEED_MDIO_CTRL_ST_C22 1 +#define ASPEED_MDIO_CTRL_OP GENMASK(27, 26) +#define MDIO_C22_OP_WRITE 0b01 +#define MDIO_C22_OP_READ 0b10 +#define ASPEED_MDIO_CTRL_PHYAD GENMASK(25, 21) +#define ASPEED_MDIO_CTRL_REGAD GENMASK(20, 16) +#define ASPEED_MDIO_CTRL_MIIWDATA GENMASK(15, 0)
+#define ASPEED_MDIO_DATA 0x4 +#define ASPEED_MDIO_DATA_MDC_THRES GENMASK(31, 24) +#define ASPEED_MDIO_DATA_MDIO_EDGE BIT(23) +#define ASPEED_MDIO_DATA_MDIO_LATCH GENMASK(22, 20) +#define ASPEED_MDIO_DATA_IDLE BIT(16) +#define ASPEED_MDIO_DATA_MIIRDATA GENMASK(15, 0)
+#define ASPEED_MDIO_TIMEOUT_US 1000
+struct aspeed_mdio_priv {
- void *base;
+};
+static int aspeed_mdio_read(struct udevice *mdio_dev, int addr, int +devad, int reg) {
- struct aspeed_mdio_priv *priv = dev_get_priv(mdio_dev);
- u32 ctrl;
- u32 data;
- int rc;
- if (devad != MDIO_DEVAD_NONE)
return -EOPNOTSUPP;- ctrl = ASPEED_MDIO_CTRL_FIRE
| FIELD_PREP(ASPEED_MDIO_CTRL_ST,ASPEED_MDIO_CTRL_ST_C22)
| FIELD_PREP(ASPEED_MDIO_CTRL_OP, MDIO_C22_OP_READ)| FIELD_PREP(ASPEED_MDIO_CTRL_PHYAD, addr)| FIELD_PREP(ASPEED_MDIO_CTRL_REGAD, reg);- writel(ctrl, priv->base + ASPEED_MDIO_CTRL);
- rc = readl_poll_timeout(priv->base + ASPEED_MDIO_DATA, data,
data & ASPEED_MDIO_DATA_IDLE,ASPEED_MDIO_TIMEOUT_US);- if (rc < 0)
return rc;- return FIELD_GET(ASPEED_MDIO_DATA_MIIRDATA, data); }
+static int aspeed_mdio_write(struct udevice *mdio_dev, int addr, int +devad, int reg, u16 val) {
- struct aspeed_mdio_priv *priv = dev_get_priv(mdio_dev);
- u32 ctrl;
- if (devad != MDIO_DEVAD_NONE)
return -EOPNOTSUPP;- ctrl = ASPEED_MDIO_CTRL_FIRE
| FIELD_PREP(ASPEED_MDIO_CTRL_ST,ASPEED_MDIO_CTRL_ST_C22)
| FIELD_PREP(ASPEED_MDIO_CTRL_OP, MDIO_C22_OP_WRITE)| FIELD_PREP(ASPEED_MDIO_CTRL_PHYAD, addr)| FIELD_PREP(ASPEED_MDIO_CTRL_REGAD, reg)| FIELD_PREP(ASPEED_MDIO_CTRL_MIIWDATA, val);- writel(ctrl, priv->base + ASPEED_MDIO_CTRL);
- return readl_poll_timeout(priv->base + ASPEED_MDIO_CTRL, ctrl,
!(ctrl & ASPEED_MDIO_CTRL_FIRE),ASPEED_MDIO_TIMEOUT_US);+}
+static const struct mdio_ops aspeed_mdio_ops = {
- .read = aspeed_mdio_read,
- .write = aspeed_mdio_write,
+};
+static int aspeed_mdio_probe(struct udevice *dev) {
- struct aspeed_mdio_priv *priv = dev_get_priv(dev);
- struct reset_ctl reset_ctl;
- int ret = 0;
- priv->base = dev_read_addr_ptr(dev);
- ret = reset_get_by_index(dev, 0, &reset_ctl);
- reset_deassert(&reset_ctl);
- return 0;
+}
+static const struct udevice_id aspeed_mdio_ids[] = {
- { .compatible = "aspeed,ast2600-mdio" },
- { }
+};
+U_BOOT_DRIVER(aspeed_mdio) = {
- .name = "aspeed_mdio",
- .id = UCLASS_MDIO,
- .of_match = aspeed_mdio_ids,
- .probe = aspeed_mdio_probe,
- .ops = &aspeed_mdio_ops,
- .plat_auto = sizeof(struct mdio_perdev_priv),
- .priv_auto = sizeof(struct aspeed_mdio_priv), };
-- 2.25.1