20 Nov
2003
20 Nov
'03
3:10 a.m.
Dear All I'm using a u-boot 1.0.0 which is released 2003-10-30 for SMDK2410 Board made by Samsung electronics. I patched u-boot for NAND Booting. It works good. When I boot and set ipddr, serverip, gatewayip and so on using setenv.. it works good too. But save values such as ipaddr, serverip, gatewayip, ethaddr .. using saveenv. U-boot return messages like that Unknown command 'saveenv' - try 'help'
printenv, setenv ,saveenv command works good before patching and using AMD NOR Flash
which is the problem?
Thank you very much .
Best regards.