
23 Jan
2019
23 Jan
'19
6:04 p.m.
On Wed, Jan 23, 2019 at 10:39 AM Carlo Caione ccaione@baylibre.com wrote:
On 23/01/19 16:19, Joe Hershberger wrote:
/cut
transitions to/from a lower power consumption level (Low
Power Idle
mode) based on link utilization. When no packets are being
transmitted, the system goes to Low Power Idle mode to save power.
Under particular circumstances this setting can cause issues where
the PHY is unable to transmit or receive any packet when in LPI mode.
The problem is caused when the PHY is configured to stop receiving
the xMII clock while it is signaling LPI. When not stated otherwise
this bit is set by libphy in the linux kernel.
This seems to be copied from Linux, please update to describe what happens in U-Boot.
It is not copied from Linux. The problem is that the libphy in the kernel is flipping this bit and this is causing the issue in U-Boot on reboot. So I'm saying exactly that.
I see... you are saying it retains the value that may have be changed by Linux. "When not stated otherwise" is to mean "If this config is disabled" Should capitalize Linux.
-- Carlo Caione _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot