Hi Dillon
On 4/9/21 9:28 AM, dillon.minfei@gmail.com wrote:
From: dillon min dillon.minfei@gmail.com
Some instances are missing in current support of stm32h743 MCU. This commit adds usart3/uart4 and sdmmc2 support.
Signed-off-by: dillon min dillon.minfei@gmail.com Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com
v5: no changes
arch/arm/dts/stm32h743.dtsi | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)
diff --git a/arch/arm/dts/stm32h743.dtsi b/arch/arm/dts/stm32h743.dtsi index 8c96698..77a8aef 100644 --- a/arch/arm/dts/stm32h743.dtsi +++ b/arch/arm/dts/stm32h743.dtsi @@ -99,6 +99,22 @@ clocks = <&rcc USART2_CK>; };
usart3: serial@40004800 {compatible = "st,stm32h7-uart";reg = <0x40004800 0x400>;interrupts = <39>;status = "disabled";clocks = <&rcc USART3_CK>;};uart4: serial@40004c00 {compatible = "st,stm32h7-uart";reg = <0x40004c00 0x400>;interrupts = <52>;status = "disabled";clocks = <&rcc UART4_CK>;};- i2c1: i2c@40005400 { compatible = "st,stm32f7-i2c"; #address-cells = <1>;
@@ -332,6 +348,20 @@ max-frequency = <120000000>; };
sdmmc2: sdmmc@48022400 {compatible = "arm,pl18x", "arm,primecell";arm,primecell-periphid = <0x10153180>;reg = <0x48022400 0x400>;interrupts = <124>;interrupt-names = "cmd_irq";clocks = <&rcc SDMMC2_CK>;clock-names = "apb_pclk";resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>;cap-sd-highspeed;cap-mmc-highspeed;max-frequency = <120000000>;};- exti: interrupt-controller@58000000 { compatible = "st,stm32h7-exti"; interrupt-controller;
Applied to u-boot-stm/master
Thanks Patrice