Now when usbtty serial console is fixed in U-Boot enable CONFIG_USB_TTY for Nokia RX-51 board by default.
Fix also USB product id as U-Boot ignores CONFIG_USBD_PRODUCTID macro and include U-Boot string into USB product name to indicate usage of U-Boot.
CONFIG_CONSOLE_MUX is already used and U-Boot console is available for all in/out devices. Therefore there is no need to have separate commands 'run sercon', 'run usbcon' and 'run vgacon', so remove them.
As space for U-Boot is limited to 256kB, disable some other unused options so CONFIG_USB_TTY can be enabled.
Nokia RX-51 does not have easily accessible UART serial console so the only option for easy debugging is to use device's keyboard+screen or this usbtty serial console over USB.
Signed-off-by: Pali Rohár pali@kernel.org --- configs/nokia_rx51_defconfig | 7 ++++--- doc/README.nokia_rx51 | 15 +-------------- include/configs/nokia_rx51.h | 21 +++++++-------------- 3 files changed, 12 insertions(+), 31 deletions(-)
diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig index 3b782715c7..bce55c4fe5 100644 --- a/configs/nokia_rx51_defconfig +++ b/configs/nokia_rx51_defconfig @@ -13,6 +13,7 @@ CONFIG_AUTOBOOT_MENU_SHOW=y CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="run preboot" CONFIG_CONSOLE_MUX=y +# CONFIG_SYS_DEVICE_NULLDEV is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Nokia RX-51 # " # CONFIG_CMD_BDI is not set @@ -47,9 +48,11 @@ CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_NET is not set CONFIG_DM=y +# CONFIG_DM_WARN is not set # CONFIG_DM_DEVICE_REMOVE is not set +# CONFIG_DM_SEQ_ALIAS is not set +# CONFIG_BLOCK_CACHE is not set CONFIG_DM_I2C=y -CONFIG_TWL4030_LED=y CONFIG_DM_MMC=y # CONFIG_MMC_HW_PARTITIONING is not set # CONFIG_MMC_VERBOSE is not set @@ -59,10 +62,8 @@ CONFIG_CONS_INDEX=3 CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_USB=y -CONFIG_USB_MUSB_HCD=y CONFIG_USB_MUSB_UDC=y CONFIG_USB_OMAP3=y -CONFIG_TWL4030_USB=y CONFIG_CFB_CONSOLE=y CONFIG_CFB_CONSOLE_ANSI=y # CONFIG_VGA_AS_SINGLE_DEVICE is not set diff --git a/doc/README.nokia_rx51 b/doc/README.nokia_rx51 index 320b5efc7d..84d1912ddd 100644 --- a/doc/README.nokia_rx51 +++ b/doc/README.nokia_rx51 @@ -24,8 +24,7 @@ called u-boot-gen-combined. It is available in following repository: There is support for hardware watchdog. Hardware watchdog is started by NOLO so u-boot must kick watchdog to prevent reboot device (but not very often, max every 2 seconds). There is also support for framebuffer display -output with ANSI escape codes and the N900 HW keyboard input. USB tty works -but is disabled because it prevents the current Maemo kernel from booting. +output with ANSI escape codes and the N900 HW keyboard input.
When U-Boot is starting it enable IBE bit in Auxiliary Control Register, which is needed for Thumb-2 ISA support. It is workaround for errata 430973. @@ -49,10 +48,6 @@ Boot from SD or eMMC in this order:
Available additional commands/variables:
- * run sercon - Use serial port for control - * run usbcon - Use usbtty for control - * run vgacon - Use framebuffer and HW keyboard for control (default) - * run sdboot - Boot from external SD card (see boot order) * run emmcboot - Boot from internal eMMC memory (see boot order) * run attachboot - Boot attached kernel image (attached to U-Boot binary) @@ -87,14 +82,6 @@ Additional variables for booting kernel: and u-boot standard output is set to serial then setup_console_atag is automatically set to 1. So output from Maemo kernel would go to serial port.
-USB TTY: - - Maemo kernel 2.6.28 will crash if u-boot enable usb tty. So USB TTY is disabled. - For enabling USB TTY just add this line to file include/configs/nokia_rx51.h - - #define CONFIG_USB_TTY - - UBIFS support:
UBIFS support is disabled, because U-Boot image is too big and cannot be diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 3f2700d8e2..23368de624 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -70,10 +70,12 @@
/* USB device configuration */ #define CONFIG_USB_DEVICE +#define CONFIG_USB_TTY #define CONFIG_USBD_VENDORID 0x0421 -#define CONFIG_USBD_PRODUCTID 0x01c8 +#define CONFIG_USBD_PRODUCTID_CDCACM 0x01c8 +#define CONFIG_USBD_PRODUCTID_GSERIAL 0x01c8 #define CONFIG_USBD_MANUFACTURER "Nokia" -#define CONFIG_USBD_PRODUCT_NAME "N900" +#define CONFIG_USBD_PRODUCT_NAME "N900 (U-Boot)"
#define GPIO_SLIDE 71
@@ -108,15 +110,9 @@ int rx51_kp_getc(struct stdio_dev *sdev); /* Environment information */ #define CONFIG_EXTRA_ENV_SETTINGS \ "usbtty=cdc_acm\0" \ - "stdin=serial,vga\0" \ - "stdout=serial,vga\0" \ - "stderr=serial,vga\0" \ - "setcon=setenv stdin ${con};" \ - "setenv stdout ${con};" \ - "setenv stderr ${con}\0" \ - "sercon=setenv con serial; run setcon\0" \ - "usbcon=setenv con usbtty; run setcon\0" \ - "vgacon=setenv con vga; run setcon\0" \ + "stdin=usbtty,serial,vga\0" \ + "stdout=usbtty,serial,vga\0" \ + "stderr=usbtty,serial,vga\0" \ "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \ "switchmmc=mmc dev ${mmcnum}\0" \ "kernaddr=0x82008000\0" \ @@ -198,9 +194,6 @@ int rx51_kp_getc(struct stdio_dev *sdev); #define CONFIG_POSTBOOTMENU \ "echo;" \ "echo Extra commands:;" \ - "echo run sercon - Use serial port for control.;" \ - "echo run usbcon - Use usbtty for control.;" \ - "echo run vgacon - Use framebuffer/keyboard.;" \ "echo run sdboot - Boot from SD card slot.;" \ "echo run emmcboot - Boot internal eMMC memory.;" \ "echo run attachboot - Boot attached kernel image.;" \