Re: [U-Boot-Users] Cannot boot from a uImage on the lite5200

In message 528646bc0504190945638591fc@mail.gmail.com you wrote:

I'm having problems getting u-boot to boot linux from a uImage on my lite5200 eval board. I can load a zImage into ram (@ 0x200000) and use the go command to boot it with no problems. When I load a uImage

This means that your kernel is probably ok in general...

I get the bootup debug banners from the linux kernel and then the board resets before the "Linux version ..." banner (and then my

...and this means that most preobably it is not ported and/or configured for booting with U-Boot.

I noticed that the uImage has the load address set to 0x00000000 instead of the 0x00800000 that the zImage uses. Is this correct? I

Yes, this is correct.

Best regards,

Wolfgang Denk