Hi Heinrich
From: U-Boot u-boot-bounces@lists.denx.de On Behalf Of Heinrich Schuchardt Sent: mardi 25 février 2020 21:36
Fix some errors pointed out by 'make refcheckdocs'.
Signed-off-by: Heinrich Schuchardt xypron.glpk@gmx.de
I found also the same issue in
-------------------------------- doc/README.SPL -------------------------------- index 4e3478a13a..929b9672b0 100644 @@ -81,7 +81,7 @@ fdtgrep is also used to remove: ('u-boot,dm-pre-reloc', 'u-boot,dm-spl' and 'u-boot,dm-tpl')
All the nodes remaining in the SPL devicetree are bound -(see driver-model/README.txt). +(see driver-model/design.rst).
Debugging ---------
doc/README.drivers.eth | 2 +- doc/README.fdt-control | 2 +- drivers/i2c/davinci_i2c.c | 2 +- drivers/i2c/kona_i2c.c | 2 +- drivers/i2c/sh_i2c.c | 2 +- drivers/i2c/soft_i2c.c | 2 +- tools/dtoc/dtb_platdata.py | 4 ++-- tools/dtoc/dtoc.py | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/doc/README.drivers.eth b/doc/README.drivers.eth index 1a9a23b51b..acaf11fea3 100644 --- a/doc/README.drivers.eth +++ b/doc/README.drivers.eth @@ -2,7 +2,7 @@
This guide describes to the old way of doing things. No new Ethernet drivers should be implemented this way. All new drivers should be written against the -U- Boot core driver model. See doc/driver-model/README.txt +U-Boot core driver model. See doc/driver-model/index.rst.
index.rst or design.rst as in the next file ?
doc/driver-model/README.txt is replaced by design.rst in commit ed205e677b6f ('doc: driver-model: Convert README.txt to rest')
Ethernet Driver Guide diff --git a/doc/README.fdt-control b/doc/README.fdt-control index e53cf51875..424d13fc5b 100644 --- a/doc/README.fdt-control +++ b/doc/README.fdt-control @@ -182,7 +182,7 @@ U-Boot can be divided into three phases: TPL, SPL and U- Boot proper.
The full device tree is available to U-Boot proper, but normally only a subset (or none at all) is available to TPL and SPL. See 'Pre-Relocation Support' and -'SPL Support' in doc/driver-model/README.txt for more details. +'SPL Support' in doc/driver-model/design.rst for more details.
Using several DTBs in the SPL (CONFIG_SPL_MULTI_DTB) diff --git a/drivers/i2c/davinci_i2c.c b/drivers/i2c/davinci_i2c.c index 2c77234c60..edc40f706c 100644 --- a/drivers/i2c/davinci_i2c.c +++ b/drivers/i2c/davinci_i2c.c @@ -8,7 +8,7 @@
- NOTE: This driver should be converted to driver model before June 2017.
- Please see doc/driver-model/i2c-howto.txt for instructions.
*/
- Please see doc/driver-model/i2c-howto.rst for instructions.
#include <common.h> diff --git a/drivers/i2c/kona_i2c.c b/drivers/i2c/kona_i2c.c index 0726b4c956..8e31481c0f 100644 --- a/drivers/i2c/kona_i2c.c +++ b/drivers/i2c/kona_i2c.c @@ -3,7 +3,7 @@
- Copyright 2013 Broadcom Corporation.
- NOTE: This driver should be converted to driver model before June 2017.
- Please see doc/driver-model/i2c-howto.txt for instructions.
*/
- Please see doc/driver-model/i2c-howto.rst for instructions.
#include <common.h> diff --git a/drivers/i2c/sh_i2c.c b/drivers/i2c/sh_i2c.c index b69d213593..834f1f2179 100644 --- a/drivers/i2c/sh_i2c.c +++ b/drivers/i2c/sh_i2c.c @@ -4,7 +4,7 @@
- Copyright (C) 2011, 2013 Nobuhiro Iwamatsu
nobuhiro.iwamatsu.yj@renesas.com
- NOTE: This driver should be converted to driver model before June 2017.
- Please see doc/driver-model/i2c-howto.txt for instructions.
*/
- Please see doc/driver-model/i2c-howto.rst for instructions.
#include <common.h> diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index 7f0303cc05..9ad1c281ff 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -12,7 +12,7 @@
- Neil Russell.
- NOTE: This driver should be converted to driver model before June 2017.
- Please see doc/driver-model/i2c-howto.txt for instructions.
*/
- Please see doc/driver-model/i2c-howto.rst for instructions.
#include <common.h> diff --git a/tools/dtoc/dtb_platdata.py b/tools/dtoc/dtb_platdata.py index 037e82c8bb..90a9e1a626 100644 --- a/tools/dtoc/dtb_platdata.py +++ b/tools/dtoc/dtb_platdata.py @@ -423,7 +423,7 @@ class DtbPlatdata(object):
This writes out the body of a header file consisting of structure definitions for node in self._valid_nodes. See the documentation in
README.of-plat for more information.
doc/driver-model/of-plat.rst for more information. """ self.out_header() self.out('#include <stdbool.h>\n') @@ -527,7 +527,7 @@ classDtbPlatdata(object): U_BOOT_DEVICE() declarations for each valid node. Where a node has multiple compatible strings, a #define is used to make them equivalent.
See the documentation in doc/driver-model/of-plat.txt for more
See the documentation in doc/driver-model/of-plat.rst for more information. """ self.out_header()diff --git a/tools/dtoc/dtoc.py b/tools/dtoc/dtoc.py index b3596a5918..f31cba900e 100755 --- a/tools/dtoc/dtoc.py +++ b/tools/dtoc/dtoc.py @@ -22,7 +22,7 @@ Dtoc produces two output files: This tool is used in U-Boot to provide device tree data to SPL without increasing the code size of SPL. This supports the CONFIG_SPL_OF_PLATDATA options. For more information about the use of this options and tool please -see doc/driver-model/of-plat.txt +see doc/driver-model/of-plat.rst """
from __future__ import print_function
2.25.0
Regards Patrick