(not subscribed to u-boot, please CC me while replying)
Hi all,
This patch series adds support for the Broadcom BCM53xx switches, in particular BCM53125 which is found no the Lamobo R1 board.
The driver is largely based on the DSA/b53 driver Linux driver and only incorporates what is necessary to succesfully bring-up all ports (including the management port) for boot over the network:
=> dhcp dw_adjust_link: Speed: 1000, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.0.11 (3 ms) Using ethernet@01c50000 device TFTP from server 192.168.0.1; our IP address is 192.168.0.11 Filename 'sun7i-a20-lamobo-r1-kernel.bin'. Load address: 0x42000000 Loading: ################################################################# ################################################################# ################################ 11.6 MiB/s done Bytes transferred = 2371552 (242fe0 hex) =>
Florian Fainelli (4): net: phy: Add Broadcom BCM53xx switch driver net: designware: Pad small packets net: phy: b53: Add b53_reg read/write commands configs: Update Lamobo_R1 with B53 switch options
configs/Lamobo_R1_defconfig | 3 + drivers/net/designware.c | 4 + drivers/net/phy/Kconfig | 14 + drivers/net/phy/Makefile | 1 + drivers/net/phy/b53.c | 767 ++++++++++++++++++++++++++++++++++++++++++++ drivers/net/phy/phy.c | 3 + include/phy.h | 1 + 7 files changed, 793 insertions(+) create mode 100644 drivers/net/phy/b53.c