Hi Trent,
-----Original Message----- From: Trent Piepho tpiepho@impinj.com Sent: Monday, July 16, 2018 10:17 AM To: Henry Beberman Henry.Beberman@microsoft.com; u- boot@lists.denx.de Cc: trini@konsulko.com; fabio.estevam@nxp.com Subject: Re: [U-Boot] [PATCH 01/11] imx: Add bootcmd to load and run UEFI from mmc
On Sat, 2018-07-14 at 00:11 +0000, Henry Beberman wrote:
From: Henry Beberman henry.beberman@microsoft.com
This patch enables i.MX platforms to easily add a boot script to their U-Boot Proper environment to automatically load and execute an EFI firmware from the first FAT partition of an MMC device.
Is there a reason to force the first partition instead of using the EFI partition code to select which partition to boot?
I also wonder, on a Linux system, is there a reason the EFI partition must use FAT?
I need to revise the commit message for this patch. The script is not fixed to the first partition of the selected MMC, it scans the disk for partitions marked bootable, then checks each one of those until it finds the imxboard_efi.fd binary.
We could switch over to using the generic load from CONFIG_CMD_FS_GENERIC if there's demand for non-FAT filesystems. We're currently using fatload because the EFI partitions in our Windows images are always FAT formatted.
Thanks, Henry