Made the include/asm-arm/arch-omap24xx/ generic file rather then specific to omap2420. So as to make it for family of processor of type omap24xx; Changed macros ending with OMAP2420 to OMAP24XX. Put the omap2420 specific code in CONFIG_OMAP242X macro and Poseidon Board support in CONFIG_OMAP243X macro. Changed the Apollon board and omap2420h4 board specific .c files which were affected due to the above change.
Signed-off-by: Vivek Dalal v.dalal@samsung.com --- board/apollon/apollon.c | 4 board/apollon/lowlevel_init.S | 4 board/apollon/mem.c | 10 board/omap2420h4/mem.c | 10 board/omap2420h4/omap2420h4.c | 7 include/asm-arm/arch-omap24xx/clocks.h | 202 +++++++++++++++ include/asm-arm/arch-omap24xx/i2c.h | 5 include/asm-arm/arch-omap24xx/mem.h | 107 ++++++++ include/asm-arm/arch-omap24xx/omap24xx.h | 399 ++++++++++++++++++++---------- include/asm-arm/arch-omap24xx/sys_info.h | 10 include/configs/apollon.h | 18 - include/configs/omap2420h4.h | 76 +++-- onenand_ipl/board/apollon/low_levelinit.S | 2 13 files changed, 674 insertions(+), 180 deletions(-)
diff --git a/board/apollon/apollon.c b/board/apollon/apollon.c index 30d8e31..5588a0e 100644 --- a/board/apollon/apollon.c +++ b/board/apollon/apollon.c @@ -68,7 +68,7 @@ int board_init(void)
gd->bd->bi_arch_number = 919; /* adress of boot parameters */ - gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0 + 0x100); + gd->bd->bi_boot_params = (OMAP24XX_SDRC_CS0 + 0x100);
return 0; } @@ -147,7 +147,7 @@ void ether_init(void) #ifdef CONFIG_DRIVER_LAN91C96 int cnt = 20;
- __raw_writeb(0x03, OMAP2420_CTRL_BASE + 0x0f2); /*protect->gpio74 */ + __raw_writeb(0x03, OMAP24XX_CTRL_BASE + 0x0f2); /*protect->gpio74 */
__raw_writew(0x0, LAN_RESET_REGISTER); do { diff --git a/board/apollon/lowlevel_init.S b/board/apollon/lowlevel_init.S index d2d9025..c6450e1 100644 --- a/board/apollon/lowlevel_init.S +++ b/board/apollon/lowlevel_init.S @@ -178,7 +178,7 @@ copy_loop: #endif
prcm_setup: - ldr r0, =OMAP2420_CM_BASE + ldr r0, =OMAP24XX_CM_BASE ldr r1, [r0, #0x544] /* CLKSEL2_PLL */ bic r1, r1, #0x03 orr r1, r1, #0x02 @@ -212,7 +212,7 @@ prcm_setup: #endif str r2, [r1]
- ldr r0, =OMAP2420_CM_BASE + ldr r0, =OMAP24XX_CM_BASE ldr r1, [r0, #0x084] and r1, r1, #0x01 cmp r1, #0x01 diff --git a/board/apollon/mem.c b/board/apollon/mem.c index e56b005..f4f36aa 100644 --- a/board/apollon/mem.c +++ b/board/apollon/mem.c @@ -82,14 +82,14 @@ u32 mem_ok(void) u32 pattern = 0x12345678;
/* clear pos A */ - __raw_writel(0x0, OMAP2420_SDRC_CS0 + 0x400); + __raw_writel(0x0, OMAP24XX_SDRC_CS0 + 0x400); /* pattern to pos B */ - __raw_writel(pattern, OMAP2420_SDRC_CS0); + __raw_writel(pattern, OMAP24XX_SDRC_CS0); /* remove pattern off the bus */ - __raw_writel(0x0, OMAP2420_SDRC_CS0 + 4); + __raw_writel(0x0, OMAP24XX_SDRC_CS0 + 4); /* get pos A value */ - val1 = __raw_readl(OMAP2420_SDRC_CS0 + 0x400); - val2 = __raw_readl(OMAP2420_SDRC_CS0); /* get val2 */ + val1 = __raw_readl(OMAP24XX_SDRC_CS0 + 0x400); + val2 = __raw_readl(OMAP24XX_SDRC_CS0); /* get val2 */
/* see if pos A value changed */ if ((val1 != 0) || (val2 != pattern)) diff --git a/board/omap2420h4/mem.c b/board/omap2420h4/mem.c index 719888f..359a6c0 100644 --- a/board/omap2420h4/mem.c +++ b/board/omap2420h4/mem.c @@ -123,11 +123,11 @@ u32 mem_ok(void) u32 val1, val2; u32 pattern = 0x12345678;
- __raw_writel(0x0,OMAP2420_SDRC_CS0+0x400); /* clear pos A */ - __raw_writel(pattern, OMAP2420_SDRC_CS0); /* pattern to pos B */ - __raw_writel(0x0,OMAP2420_SDRC_CS0+4); /* remove pattern off the bus */ - val1 = __raw_readl(OMAP2420_SDRC_CS0+0x400); /* get pos A value */ - val2 = __raw_readl(OMAP2420_SDRC_CS0); /* get val2 */ + __raw_writel(0x0, OMAP24XX_SDRC_CS0+0x400); /* clear pos A */ + __raw_writel(pattern, OMAP24XX_SDRC_CS0); /* pattern to pos B */ + __raw_writel(0x0, OMAP24XX_SDRC_CS0+4); /* remove pattern off the bus */ + val1 = __raw_readl(OMAP24XX_SDRC_CS0+0x400); /* get pos A value */ + val2 = __raw_readl(OMAP24XX_SDRC_CS0); /* get val2 */
if ((val1 != 0) || (val2 != pattern)) /* see if pos A value changed*/ return(0); diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c index d3dc5f3..38cb0a8 100644 --- a/board/omap2420h4/omap2420h4.c +++ b/board/omap2420h4/omap2420h4.c @@ -59,7 +59,8 @@ int board_init (void) gpmc_init(); /* in SRAM or SDRM, finish GPMC */
gd->bd->bi_arch_number = MACH_TYPE_OMAP_H4; /* board id for linux */ - gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0+0x100); /* adress of boot parameters */ + /* address of boot parameters */ + gd->bd->bi_boot_params = (OMAP24XX_SDRC_CS0+0x100);
return 0; } @@ -159,7 +160,7 @@ void ether_init (void) #ifdef CONFIG_DRIVER_LAN91C96 int cnt = 20;
- __raw_writeb(0x3,OMAP2420_CTRL_BASE+0x10a); /*protect->gpio95 */ + __raw_writeb(0x3, OMAP24XX_CTRL_BASE+0x10a); /*protect->gpio95 */
__raw_writew(0x0, LAN_RESET_REGISTER); do { @@ -738,7 +739,7 @@ void muxSetupSDRC(void) *****************************************************************************/ void update_mux(u32 btype,u32 mtype) { - u32 cpu, base = OMAP2420_CTRL_BASE; + u32 cpu, base = OMAP24XX_CTRL_BASE; cpu = get_cpu_type();
if (btype == BOARD_H4_MENELAUS) { diff --git a/include/asm-arm/arch-omap24xx/clocks.h b/include/asm-arm/arch-omap24xx/clocks.h index 2e92569..7d47959 100644 --- a/include/asm-arm/arch-omap24xx/clocks.h +++ b/include/asm-arm/arch-omap24xx/clocks.h @@ -31,6 +31,8 @@ #define DPLL_LOCK 0x3 /* DPLL lock */ #endif
+#if defined(CONFIG_OMAP242X) + /****************************************************************************; ; PRCM Scheme II ; @@ -109,4 +111,204 @@ /* lock delay time out */ #define LDELAY 12000000
+#elif defined(CONFIG_OMAP243X) + +/* cm_clksel core fields not ratio governed */ +#define RX_CLKSEL_DSS1 (0x10 << 8) +#define RX_CLKSEL_DSS2 (0x0 << 13) +#define RX_CLKSEL_SSI (0x5 << 20) + +/* 2430 Ratio's */ +/* 2430-Ratio Config 1 */ +#define R1_CLKSEL_L3 (4 << 0) +#define R1_CLKSEL_L4 (2 << 5) +#define R1_CLKSEL_USB (4 << 25) +#define R1_CM_CLKSEL1_CORE_VAL (R1_CLKSEL_USB | RX_CLKSEL_SSI \ + | RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 \ + | R1_CLKSEL_L4 | R1_CLKSEL_L3) +#define R1_CLKSEL_MPU (2 << 0) +#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU +#define R1_CLKSEL_DSP (2 << 0) +#define R1_CLKSEL_DSP_IF (2 << 5) +#define R1_CM_CLKSEL_DSP_VAL (R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF) +#define R1_CLKSEL_GFX (2 << 0) +#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX +#define R1_CLKSEL_MDM (4 << 0) +#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM + +/* 2430-Ratio Config 2 */ +#define R2_CLKSEL_L3 (6 << 0) +#define R2_CLKSEL_L4 (2 << 5) +#define R2_CLKSEL_USB (2 << 25) +#define R2_CM_CLKSEL1_CORE_VAL (R2_CLKSEL_USB | RX_CLKSEL_SSI \ + | RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 \ + | R2_CLKSEL_L4 | R2_CLKSEL_L3) +#define R2_CLKSEL_MPU (2 << 0) +#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU +#define R2_CLKSEL_DSP (2 << 0) +#define R2_CLKSEL_DSP_IF (3 << 5) +#define R2_CM_CLKSEL_DSP_VAL (R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF) +#define R2_CLKSEL_GFX (2 << 0) +#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX +#define R2_CLKSEL_MDM (6 << 0) +#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM + +/* 2430-Ratio Boot */ +#define RB_CLKSEL_L3 (1 << 0) +#define RB_CLKSEL_L4 (1 << 5) +#define RB_CLKSEL_USB (1 << 25) +#define RB_CM_CLKSEL1_CORE_VAL (RB_CLKSEL_USB | RX_CLKSEL_SSI \ + | RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 \ + | RB_CLKSEL_L4 | RB_CLKSEL_L3) +#define RB_CLKSEL_MPU (1 << 0) +#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU +#define RB_CLKSEL_DSP (1 << 0) +#define RB_CLKSEL_DSP_IF (1 << 5) +#define RB_CM_CLKSEL_DSP_VAL (RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF) +#define RB_CLKSEL_GFX (1 << 0) +#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX +#define RB_CLKSEL_MDM (1 << 0) +#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM + +/* 2430 Target modes: Along with each configuration the CPU has several modes + * * which goes along with them. Modes mainly are the addition of descrite DPLL + * * combinations to go along with a ratio. + * */ +/* hardware goverend */ +#define MX_48M_SRC (0 << 3) +#define MX_54M_SRC (0 << 5) +#define MX_APLLS_CLIKIN_12 (3 << 23) +#define MX_APLLS_CLIKIN_13 (2 << 23) +#define MX_APLLS_CLIKIN_19_2 (0 << 23) + +/* 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed */ +/* boot (boot) */ +#define MB_DPLL_MULT (1 << 12) +#define MB_DPLL_DIV (0 << 8) +#define MB_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV \ + | MB_DPLL_MULT | MX_APLLS_CLIKIN_12) + +#define MB_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV \ + | MB_DPLL_MULT | MX_APLLS_CLIKIN_13) + +#define MB_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV \ + | MB_DPLL_MULT | MX_APLLS_CLIKIN_19) + +/* #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz */ + +#define M2_DPLL_MULT_12 (55 << 12) +#define M2_DPLL_DIV_12 (1 << 8) +#define M2_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC \ + | M2_DPLL_DIV_12 | M2_DPLL_MULT_12 \ + | MX_APLLS_CLIKIN_12) +/* Use 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2, relock time issue */ +#define M2_DPLL_MULT_13 (330 << 12) +#define M2_DPLL_DIV_13 (12 << 8) +#define M2_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC \ + | M2_DPLL_DIV_13 | M2_DPLL_MULT_13 \ + | MX_APLLS_CLIKIN_13) +#define M2_DPLL_MULT_19 (275 << 12) +#define M2_DPLL_DIV_19 (15 << 8) +#define M2_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC \ + | M2_DPLL_DIV_19 | M2_DPLL_MULT_19 \ + | MX_APLLS_CLIKIN_19_2) + +/* #3 (ratio2) DPLL = 330*2 = 660MHz, L3=110MHz */ +#define M3_DPLL_MULT_12 (55 << 12) +#define M3_DPLL_DIV_12 (1 << 8) +#define M3_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC \ + | M3_DPLL_DIV_12 | M3_DPLL_MULT_12 \ + | MX_APLLS_CLIKIN_12) +#define M3_DPLL_MULT_13 (330 << 12) +#define M3_DPLL_DIV_13 (12 << 8) +#define M5A_DPLL_MULT_13 (266 << 12) +#define M5A_DPLL_DIV_13 (12 << 8) +#define M5A_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC \ + | M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 \ + | MX_APLLS_CLIKIN_13) +#define M5A_DPLL_MULT_19 (180 << 12) +#define M5A_DPLL_DIV_19 (12 << 8) +#define M5A_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC \ + | M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 \ + | MX_APLLS_CLIKIN_19_2) + +/* #5b (ratio1) target DPLL = 200*2 = 400MHz, L3=100MHz */ +#define M5B_DPLL_MULT_12 (50 << 12) +#define M5B_DPLL_DIV_12 (2 << 8) +#define M5B_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC \ + | M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 \ + | MX_APLLS_CLIKIN_12) +#define M5B_DPLL_MULT_13 (200 << 12) +#define M5B_DPLL_DIV_13 (12 << 8) + +#define M5B_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC \ + | M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 \ + | MX_APLLS_CLIKIN_13) +#define M5B_DPLL_MULT_19 (125 << 12) +#define M5B_DPLL_DIV_19 (31 << 8) +#define M5B_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC \ + | M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 \ + | MX_APLLS_CLIKIN_19_2) + +/*high and low operation value */ +#define MX_CLKSEL2_PLL_2x_VAL (2 << 0) +#define MX_CLKSEL2_PLL_1x_VAL (1 << 0) + + +/* set defaults for boot up */ + +#if defined(PRCM_CONFIG_I) /* ARM-330MHz IVA2-330MHz L3-165MHz */ +# define DPLL_OUT MX_CLKSEL2_PLL_2x_VAL +# define MPU_DIV R1_CLKSEL_MPU +# define DSP_DIV R1_CM_CLKSEL_DSP_VAL +# define GFX_DIV R1_CM_CLKSEL_GFX_VAL +# define BUS_DIV R1_CM_CLKSEL1_CORE_VAL +# define DPLL_VAL M2_CM_CLKSEL1_PLL_13_VAL +# define MDM_DIV R2_CM_CLKSEL_MDM_VAL +#elif defined(PRCM_CONFIG_3) /* ARM-330MHz IVA2-330MHz L3-110MHz */ +# define DPLL_OUT MX_CLKSEL2_PLL_2x_VAL +# define MPU_DIV R2_CLKSEL_MPU +# define DSP_DIV R2_CM_CLKSEL_DSP_VAL +# define GFX_DIV R2_CM_CLKSEL_GFX_VAL +# define BUS_DIV R2_CM_CLKSEL1_CORE_VAL +# define DPLL_VAL M3_CM_CLKSEL1_PLL_13_VAL +# define MDM_DIV R2_CM_CLKSEL_MDM_VAL +#elif defined(PRCM_CONFIG_5A) /* ARM-266MHz IVA2-266MHz L3-133MHz */ +# define DPLL_OUT MX_CLKSEL2_PLL_2x_VAL +# define MPU_DIV R1_CLKSEL_MPU +# define DSP_DIV R1_CM_CLKSEL_DSP_VAL +# define GFX_DIV R1_CM_CLKSEL_GFX_VAL +# define BUS_DIV R1_CM_CLKSEL1_CORE_VAL +# define DPLL_VAL M5A_CM_CLKSEL1_PLL_13_VAL +# define MDM_DIV R2_CM_CLKSEL_MDM_VAL +#elif defined(PRCM_CONFIG_5B) /* ARM-200MHz IVA2-200MHz L3-100MHz */ +# define DPLL_OUT MX_CLKSEL2_PLL_2x_VAL +# define MPU_DIV R1_CLKSEL_MPU +# define DSP_DIV R1_CM_CLKSEL_DSP_VAL +# define GFX_DIV R1_CM_CLKSEL_GFX_VAL +# define BUS_DIV R1_CM_CLKSEL1_CORE_VAL +# define DPLL_VAL M5B_CM_CLKSEL1_PLL_13_VAL +# define MDM_DIV R1_CM_CLKSEL_MDM_VAL +#elif defined(PRCM_CONFIG_II) /*ARM-100MHz */ +# define DPLL_OUT MX_CLKSEL2_PLL_2x_VAL +# define MPU_DIV 0x00000002 +# define DSP_DIV 0x00000042 +# define GFX_DIV 0x00000002 +# define BUS_DIV 0x08501046 +# define DPLL_VAL 0x0112CC00 +# define MDM_DIV R2_CM_CLKSEL_MDM_VAL +#endif + +#endif + +/* lock delay time out */ +#define LDELAY 12000000 +#define S12M 12000000 +#define S13M 13000000 +#define S19_2M 19200000 +#define S24M 24000000 +#define S26M 26000000 +#define S38_4M 38400000 + + #endif diff --git a/include/asm-arm/arch-omap24xx/i2c.h b/include/asm-arm/arch-omap24xx/i2c.h index 7248950..06c4e65 100644 --- a/include/asm-arm/arch-omap24xx/i2c.h +++ b/include/asm-arm/arch-omap24xx/i2c.h @@ -23,8 +23,9 @@ #ifndef _OMAP24XX_I2C_H_ #define _OMAP24XX_I2C_H_
-#define I2C_BASE 0x48070000 -#define I2C_BASE2 0x48072000 /* nothing hooked up on h4 */ +/* I2C base */ +#define I2C_BASE (OMAP24XX_L4_IO_BASE + 0x70000) +#define I2C_BASE2 (OMAP24XX_L4_IO_BASE + 0x72000)
#define I2C_REV (I2C_BASE + 0x00) #define I2C_IE (I2C_BASE + 0x04) diff --git a/include/asm-arm/arch-omap24xx/mem.h b/include/asm-arm/arch-omap24xx/mem.h index 42e8ab2..5e0a25c 100644 --- a/include/asm-arm/arch-omap24xx/mem.h +++ b/include/asm-arm/arch-omap24xx/mem.h @@ -153,4 +153,111 @@ typedef enum { # define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24)) #endif /* endif CONFIG_SYS_PRCM_III */
+#if defined(PRCM_CONFIG_II) /* L3 at 100MHz */ + +# define STNOR_GPMC_CONFIG1 0x3 +# define STNOR_GPMC_CONFIG2 0x000f0f01 +# define STNOR_GPMC_CONFIG3 0x00050502 +# define STNOR_GPMC_CONFIG4 0x0C060C06 +# define STNOR_GPMC_CONFIG5 0x01131F1F +# define STNOR_GPMC_CONFIG6 0x0 + +# define MPDB_GPMC_CONFIG1 0x00011000 +# define MPDB_GPMC_CONFIG2 0x001F1F00 +# define MPDB_GPMC_CONFIG3 0x00080802 +# define MPDB_GPMC_CONFIG4 0x1C091C09 +# define MPDB_GPMC_CONFIG5 0x031A1F1F +# define MPDB_GPMC_CONFIG6 0x000003C2 + +#if defined(ASYNC_READ) +# define ONENAND_GPMC_CONFIG1 0x01011201 +# define ONENAND_GPMC_CONFIG2 0x00070800 +# define ONENAND_GPMC_CONFIG3 0x00020200 +# define ONENAND_GPMC_CONFIG4 0x07030803 +# define ONENAND_GPMC_CONFIG5 0x01060909 +# define ONENAND_GPMC_CONFIG6 0x00000000 + +#else +# define ONENAND_GPMC_CONFIG1 0xE5011201 +# define ONENAND_GPMC_CONFIG2 0x00070D00 +# define ONENAND_GPMC_CONFIG3 0x00020300 +# define ONENAND_GPMC_CONFIG4 0x07030D07 +# define ONENAND_GPMC_CONFIG5 0x020B090E +# define ONENAND_GPMC_CONFIG6 0x00000000 +#endif + +#endif + +#if defined(PRCM_CONFIG_III) /* L3 at 100MHz */ +# define STNOR_GPMC_CONFIG1 0x3 +# define STNOR_GPMC_CONFIG2 0x00151501 +# define STNOR_GPMC_CONFIG3 0x00060602 +# define STNOR_GPMC_CONFIG4 0x10081008 +# define STNOR_GPMC_CONFIG5 0x01131F1F +# define STNOR_GPMC_CONFIG6 0x000004c4 + +# define MPDB_GPMC_CONFIG1 0x00011000 +# define MPDB_GPMC_CONFIG2 0x001f1f01 +# define MPDB_GPMC_CONFIG3 0x00080803 +# define MPDB_GPMC_CONFIG4 0x1C091C09 +# define MPDB_GPMC_CONFIG5 0x041f1F1F +# define MPDB_GPMC_CONFIG6 0x000004C4 + +# define ONENAND_GPMC_CONFIG1 0x00001200 +# define ONENAND_GPMC_CONFIG2 0x000c0c01 +# define ONENAND_GPMC_CONFIG3 0x00030301 +# define ONENAND_GPMC_CONFIG4 0x0c040c04 +# define ONENAND_GPMC_CONFIG5 0x010C1010 +# define ONENAND_GPMC_CONFIG6 0x00000000 + +#endif /* endif CFG_PRCM_III */ + +#if defined(PRCM_CONFIG_I) /* L3 at 165MHz */ + +# define STNOR_GPMC_CONFIG1 0x3 +# define STNOR_GPMC_CONFIG2 0x00151501 +# define STNOR_GPMC_CONFIG3 0x00060602 +# define STNOR_GPMC_CONFIG4 0x11091109 +# define STNOR_GPMC_CONFIG5 0x01141F1F +# define STNOR_GPMC_CONFIG6 0x000004c4 + +# define MPDB_GPMC_CONFIG1 0x00011000 +# define MPDB_GPMC_CONFIG2 0x001f1f01 +# define MPDB_GPMC_CONFIG3 0x00080803 +# define MPDB_GPMC_CONFIG4 0x1c0b1c0a +# define MPDB_GPMC_CONFIG5 0x041f1F1F +# define MPDB_GPMC_CONFIG6 0x000004C4 + +# define ONENAND_GPMC_CONFIG1 0x00001200 +# define ONENAND_GPMC_CONFIG2 0x000F0F01 +# define ONENAND_GPMC_CONFIG3 0x00030301 +# define ONENAND_GPMC_CONFIG4 0x0F040F04 +# define ONENAND_GPMC_CONFIG5 0x010F1010 +# define ONENAND_GPMC_CONFIG6 0x00000000 + +#endif + +/* Board Specific Settings for each of the configurations for chips + * whose values change as per platform. - None currently + */ + +/* max number of GPMC Chip Selects */ +#define GPMC_MAX_CS 8 +/* max number of GPMC regs */ +#define GPMC_MAX_REG 7 + +#define PROC_NAND 2 +#define PISMO_SIBLEY0 3 +#define PISMO_SIBLEY1 4 +#define PISMO_ONENAND 5 +#define DBG_MPDB 6 +#define PISMO_PCMCIA 7 +#define PROC_ONENAND 8 +#define ONENAND_CS2 9 +#define GPMC_SIZE_256M 0x0 +#define GPMC_SIZE_128M 0x8 +#define GPMC_SIZE_64M 0xC +#define GPMC_SIZE_32M 0xE +#define GPMC_SIZE_16M 0xF + #endif /* endif _OMAP24XX_MEM_H_ */ diff --git a/include/asm-arm/arch-omap24xx/omap24xx.h b/include/asm-arm/arch-omap24xx/omap24xx.h index 1dec62e..6e1c9e8 100644 --- a/include/asm-arm/arch-omap24xx/omap24xx.h +++ b/include/asm-arm/arch-omap24xx/omap24xx.h @@ -27,96 +27,16 @@
#include <asm/arch/sizes.h>
-/* - * 2420 specific Section - */ - -/* L3 Firewall */ -#define A_REQINFOPERM0 0x68005048 -#define A_READPERM0 0x68005050 -#define A_WRITEPERM0 0x68005058 -/* #define GP_DEVICE (BIT8|BIT9)FIXME--commented out to make compile--FIXME*/ - -/* L3 Firewall */ -#define A_REQINFOPERM0 0x68005048 -#define A_READPERM0 0x68005050 -#define A_WRITEPERM0 0x68005058 - -/* CONTROL */ -#define OMAP2420_CTRL_BASE (0x48000000) -#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8) - /* device type */ +#define DEVICE_MASK (BIT8|BIT9|BIT10) #define TST_DEVICE 0x0 #define EMU_DEVICE 0x1 #define HS_DEVICE 0x2 #define GP_DEVICE 0x3
-/* TAP information */ -#define OMAP2420_TAP_BASE (0x48014000) -#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204) -#define PRODUCTION_ID (OMAP2420_TAP_BASE+0x208) - -/* GPMC */ -#define OMAP2420_GPMC_BASE (0x6800A000) -#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10) -#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C) -#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40) -#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50) -#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60) -#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64) -#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68) -#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C) -#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70) -#define GPMC_CONFIG6_0 (OMAP2420_GPMC_BASE+0x74) -#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78) -#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90) -#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94) -#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98) -#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C) -#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0) -#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4) -#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8) -#define GPMC_CONFIG1_2 (OMAP2420_GPMC_BASE+0xC0) -#define GPMC_CONFIG2_2 (OMAP2420_GPMC_BASE+0xC4) -#define GPMC_CONFIG3_2 (OMAP2420_GPMC_BASE+0xC8) -#define GPMC_CONFIG4_2 (OMAP2420_GPMC_BASE+0xCC) -#define GPMC_CONFIG5_2 (OMAP2420_GPMC_BASE+0xD0) -#define GPMC_CONFIG6_2 (OMAP2420_GPMC_BASE+0xD4) -#define GPMC_CONFIG7_2 (OMAP2420_GPMC_BASE+0xD8) -#define GPMC_CONFIG1_3 (OMAP2420_GPMC_BASE+0xF0) -#define GPMC_CONFIG2_3 (OMAP2420_GPMC_BASE+0xF4) -#define GPMC_CONFIG3_3 (OMAP2420_GPMC_BASE+0xF8) -#define GPMC_CONFIG4_3 (OMAP2420_GPMC_BASE+0xFC) -#define GPMC_CONFIG5_3 (OMAP2420_GPMC_BASE+0x100) -#define GPMC_CONFIG6_3 (OMAP2420_GPMC_BASE+0x104) -#define GPMC_CONFIG7_3 (OMAP2420_GPMC_BASE+0x108) - -/* SMS */ -#define OMAP2420_SMS_BASE 0x68008000 -#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10) -#define SMS_CLASS_ARB0 (OMAP2420_SMS_BASE+0xD0) -# define BURSTCOMPLETE_GROUP7 BIT31
-/* SDRC */ -#define OMAP2420_SDRC_BASE 0x68009000 -#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10) -#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14) -#define SDRC_CS_CFG (OMAP2420_SDRC_BASE+0x40) -#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44) -#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60) -#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68) -#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70) -#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80) -#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84) -#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C) -#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0) -#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4) -#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8) -#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4) -#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8) -#define OMAP2420_SDRC_CS0 0x80000000 -#define OMAP2420_SDRC_CS1 0xA0000000 +#define OMAP24XX_SDRC_CS0 0x80000000 +#define OMAP24XX_SDRC_CS1 0xA0000000 #define CMD_NOP 0x0 #define CMD_PRECHARGE 0x1 #define CMD_AUTOREFRESH 0x2 @@ -130,25 +50,6 @@ #define REF_ON_IDLE (0x1 << 6)
-/* UART */ -#define OMAP2420_UART1 0x4806A000 -#define OMAP2420_UART2 0x4806C000 -#define OMAP2420_UART3 0x4806E000 - -/* General Purpose Timers */ -#define OMAP2420_GPT1 0x48028000 -#define OMAP2420_GPT2 0x4802A000 -#define OMAP2420_GPT3 0x48078000 -#define OMAP2420_GPT4 0x4807A000 -#define OMAP2420_GPT5 0x4807C000 -#define OMAP2420_GPT6 0x4807E000 -#define OMAP2420_GPT7 0x48080000 -#define OMAP2420_GPT8 0x48082000 -#define OMAP2420_GPT9 0x48084000 -#define OMAP2420_GPT10 0x48086000 -#define OMAP2420_GPT11 0x48088000 -#define OMAP2420_GPT12 0x4808A000 - /* timer regs offsets (32 bit regs) */ #define TIDR 0x0 /* r */ #define TIOCP_CFG 0x10 /* rw */ @@ -167,34 +68,55 @@ #define TCAR2 0x44 /* r */
/* WatchDog Timers (1 secure, 3 GP) */ -#define WD1_BASE 0x48020000 -#define WD2_BASE 0x48022000 -#define WD3_BASE 0x48024000 -#define WD4_BASE 0x48026000 #define WWPS 0x34 /* r */ #define WSPR 0x48 /* rw */ #define WD_UNLOCK1 0xAAAA #define WD_UNLOCK2 0x5555
-/* PRCM */ -#define OMAP2420_CM_BASE 0x48008000 -#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080) -#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140) -#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200) -#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204) -#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210) -#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214) -#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240) -#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440) -#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244) -#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340) -#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450) -#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500) -#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520) -#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540) -#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544) -#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840) +#if defined(CONFIG_OMAP242X) +/* + * 2420 specific Section + */ + +#define OMAP24XX_CM_BASE 0x48008000 +#define OMAP24XX_L4_IO_BASE (0x48000000) + +/* L3 Firewall */ +#define A_REQINFOPERM0 0x68005048 +#define A_READPERM0 0x68005050 +#define A_WRITEPERM0 0x68005058 +/* #define GP_DEVICE (BIT8|BIT9) FIXME-commented out to make compile--FIXME*/ + +/* WatchDog Timers (1 secure, 3 GP) */ +#define WD1_BASE 0x48020000 +#define WD2_BASE 0x48022000 +#define WD3_BASE 0x48024000 +#define WD4_BASE 0x48026000
+/* UART */ +#define OMAP24XX_UART1 0x4806A000 +#define OMAP24XX_UART2 0x4806C000 +#define OMAP24XX_UART3 0x4806E000 + +#define OMAP24XX_TAP_BASE (0x48014000) +#define OMAP24XX_CTRL_BASE (0x48000000) +#define OMAP24XX_GPMC_BASE (0x6800A000) +#define OMAP24XX_SMS_BASE 0x68008000 +#define OMAP24XX_SDRC_BASE 0x68009000 + +/* General Purpose Timers */ +#define OMAP24XX_GPT1 0x48028000 +#define OMAP24XX_GPT2 0x4802A000 +#define OMAP24XX_GPT3 0x48078000 +#define OMAP24XX_GPT4 0x4807A000 +#define OMAP24XX_GPT5 0x4807C000 +#define OMAP24XX_GPT6 0x4807E000 +#define OMAP24XX_GPT7 0x48080000 +#define OMAP24XX_GPT8 0x48082000 +#define OMAP24XX_GPT9 0x48084000 +#define OMAP24XX_GPT10 0x48086000 +#define OMAP24XX_GPT11 0x48088000 +#define OMAP24XX_GPT12 0x4808A000 /* * H4 specific Section */ @@ -240,7 +162,236 @@
/* Common */ #define LOW_LEVEL_SRAM_STACK 0x4020FFFC +#define PERIFERAL_PORT_BASE 0x480FE003 + + +#elif defined(CONFIG_OMAP243X) /*OMAP243X specific code*/ + +/* GPMC */ +#define OMAP24XX_GPMC_BASE (0x6E000000) +/* SMS */ +#define OMAP24XX_SMS_BASE 0x6C000000 +/* SDRC */ +#define OMAP24XX_SDRC_BASE 0x6D000000 +#define DEBUG_BASE 0x08000000 /* debug board */ +/* + * L4 Peripherals - L4 Wakeup and L4 Core now + */ +#define OMAP243X_CORE_L4_IO_BASE 0x48000000 +#define OMAP243X_WAKEUP_L4_IO_BASE 0x49000000 +/* Stuff on L3 Interconnect */ +#define SMX_APE_BASE 0x68000000 +/* PRCM */ +#define OMAP24XX_CM_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x06000) + +/* L3 Firewall */ +#define A_REQINFOPERM0 (SMX_APE_BASE + 0x05048) +#define A_READPERM0 (SMX_APE_BASE + 0x05050) +#define A_WRITEPERM0 (SMX_APE_BASE + 0x05058) + +#define OMAP24XX_L4_IO_BASE OMAP243X_CORE_L4_IO_BASE + +/* CONTROL */ +#define OMAP24XX_CTRL_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x2000) + +/* TAP information */ +#define OMAP24XX_TAP_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0xA000) + +/* UART */ +#define OMAP24XX_UART1 (OMAP24XX_L4_IO_BASE+0x6a000) +#define OMAP24XX_UART2 (OMAP24XX_L4_IO_BASE+0x6c000) +#define OMAP24XX_UART3 (OMAP24XX_L4_IO_BASE+0x6e000) + +/* General Purpose Timers */ +#define OMAP24XX_GPT1 (OMAP243X_WAKEUP_L4_IO_BASE+0x18000) +#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000) +#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000) +#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000) +#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000) +#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000) +#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000) +#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000) +#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000) +#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000) +#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000) +#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000) + +/* WatchDog Timers (1 secure, 3 GP) */ +#define WD1_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x14000) +#define WD2_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x16000) +#define WD3_BASE (OMAP24XX_L4_IO_BASE+0x24000) /* not present */ +#define WD4_BASE (OMAP24XX_L4_IO_BASE+0x26000) + +/* 32KTIMER */ +#define SYNC_32KTIMER_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x20000) +#define S32K_CR (SYNC_32KTIMER_BASE+0x10) + +#if (CONFIG_2430) + +/* base address for indirect vectors (internal boot mode) */ +#define SRAM_OFFSET0 0x40000000 +#define SRAM_OFFSET1 0x00200000 +#define SRAM_OFFSET2 0x0000F800 +#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) + +#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
#define PERIFERAL_PORT_BASE 0x480FE003
+/* FPGA on Debug board.*/ +#define ETH_CONTROL_REG (DEBUG_BASE+0x30b) +#define LAN_RESET_REGISTER (DEBUG_BASE+0x1c) + + +#define DIP_SWITCH_INPUT_REG2 (DEBUG_BASE+0x60) +#define LED_REGISTER (DEBUG_BASE+0x40) +#define FPGA_REV_REGISTER (DEBUG_BASE+0x10) +#define EEPROM_MAIN_BRD (DEBUG_BASE+0x10000+0x1800) +#define EEPROM_CONN_BRD (DEBUG_BASE+0x10000+0x1900) +#define EEPROM_UI_BRD (DEBUG_BASE+0x10000+0x1A00) +#define EEPROM_MCAM_BRD (DEBUG_BASE+0x10000+0x1B00) +#define I2C2_MEMORY_STATUS_REG (DEBUG_BASE+0x10000+0xA) +#define ENHANCED_UI_EE_NAME "750-2038" +#define GDP_MB_EE_NAME "750-2031-3" #endif + +#if defined(CONFIG_POSEIDON) +#define POSEIDON_CS0_BASE 0x00000000 /* OneNAND */ +#define POSEIDON_CS1_BASE 0x08000000 /* ethernet */ +#define POSEIDON_CS2_BASE 0x10000000 /* OneNAND */ +#define POSEIDON_CS3_BASE 0x18000000 /* NOR */ + +#endif /* endif CONFIG_POSEIDON */ + +#endif /******OMAP243X Specific code******/ + +/* CONTROL */ +#define CONTROL_STATUS (OMAP24XX_CTRL_BASE + 0x2F8) +#define OMAP24XX_MCR (OMAP24XX_CTRL_BASE + 0x8C) + + +/* TAP information */ +#define TAP_IDCODE_REG (OMAP24XX_TAP_BASE+0x204) +#define PRODUCTION_ID (OMAP24XX_TAP_BASE+0x208) + +/* GPMC */ +#define GPMC_SYSCONFIG (OMAP24XX_GPMC_BASE+0x10) +#define GPMC_IRQENABLE (OMAP24XX_GPMC_BASE+0x1C) +#define GPMC_TIMEOUT_CONTROL (OMAP24XX_GPMC_BASE+0x40) +#define GPMC_CONFIG (OMAP24XX_GPMC_BASE+0x50) +#define GPMC_CONFIG1_0 (OMAP24XX_GPMC_BASE+0x60) +#define GPMC_CONFIG2_0 (OMAP24XX_GPMC_BASE+0x64) +#define GPMC_CONFIG3_0 (OMAP24XX_GPMC_BASE+0x68) +#define GPMC_CONFIG4_0 (OMAP24XX_GPMC_BASE+0x6C) +#define GPMC_CONFIG5_0 (OMAP24XX_GPMC_BASE+0x70) +#define GPMC_CONFIG6_0 (OMAP24XX_GPMC_BASE+0x74) +#define GPMC_CONFIG7_0 (OMAP24XX_GPMC_BASE+0x78) +#define GPMC_CONFIG1_1 (OMAP24XX_GPMC_BASE+0x90) +#define GPMC_CONFIG2_1 (OMAP24XX_GPMC_BASE+0x94) +#define GPMC_CONFIG3_1 (OMAP24XX_GPMC_BASE+0x98) +#define GPMC_CONFIG4_1 (OMAP24XX_GPMC_BASE+0x9C) +#define GPMC_CONFIG5_1 (OMAP24XX_GPMC_BASE+0xA0) +#define GPMC_CONFIG6_1 (OMAP24XX_GPMC_BASE+0xA4) +#define GPMC_CONFIG7_1 (OMAP24XX_GPMC_BASE+0xA8) +#define GPMC_CONFIG1_2 (OMAP24XX_GPMC_BASE+0xC0) +#define GPMC_CONFIG2_2 (OMAP24XX_GPMC_BASE+0xC4) +#define GPMC_CONFIG3_2 (OMAP24XX_GPMC_BASE+0xC8) +#define GPMC_CONFIG4_2 (OMAP24XX_GPMC_BASE+0xCC) +#define GPMC_CONFIG5_2 (OMAP24XX_GPMC_BASE+0xD0) +#define GPMC_CONFIG6_2 (OMAP24XX_GPMC_BASE+0xD4) +#define GPMC_CONFIG7_2 (OMAP24XX_GPMC_BASE+0xD8) +#define GPMC_CONFIG1_3 (OMAP24XX_GPMC_BASE+0xF0) +#define GPMC_CONFIG2_3 (OMAP24XX_GPMC_BASE+0xF4) +#define GPMC_CONFIG3_3 (OMAP24XX_GPMC_BASE+0xF8) +#define GPMC_CONFIG4_3 (OMAP24XX_GPMC_BASE+0xFC) +#define GPMC_CONFIG5_3 (OMAP24XX_GPMC_BASE+0x100) +#define GPMC_CONFIG6_3 (OMAP24XX_GPMC_BASE+0x104) +#define GPMC_CONFIG7_3 (OMAP24XX_GPMC_BASE+0x108) + +#define GPMC_CONFIG_CS0 (OMAP24XX_GPMC_BASE+0x60) +#define GPMC_CONFIG_WIDTH (0x30) +#define GPMC_CONFIG_CS1 (OMAP24XX_GPMC_BASE+0x90) +#define GPMC_CONFIG_CS2 (OMAP24XX_GPMC_BASE+0xC0) + +#define GPMC_CONFIG1 (0x00) +#define GPMC_CONFIG2 (0x04) +#define GPMC_CONFIG3 (0x08) +#define GPMC_CONFIG4 (0x0C) +#define GPMC_CONFIG5 (0x10) +#define GPMC_CONFIG6 (0x14) +#define GPMC_CONFIG7 (0x18) +#define GPMC_NAND_CMD (0x1C) +#define GPMC_NAND_ADR (0x20) +#define GPMC_NAND_DAT (0x24) + +/* SMS */ +#define SMS_SYSCONFIG (OMAP24XX_SMS_BASE+0x10) +#define SMS_CLASS_ARB0 (OMAP24XX_SMS_BASE+0xD0) +# define BURSTCOMPLETE_GROUP7 BIT31 + +/* SDRC */ +#define SDRC_SYSCONFIG (OMAP24XX_SDRC_BASE+0x10) +#define SDRC_STATUS (OMAP24XX_SDRC_BASE+0x14) +#define SDRC_CS_CFG (OMAP24XX_SDRC_BASE+0x40) +#define SDRC_SHARING (OMAP24XX_SDRC_BASE+0x44) +#define SDRC_DLLA_CTRL (OMAP24XX_SDRC_BASE+0x60) + +#define SDRC_DLLA_STATUS (OMAP24XX_SDRC_BASE+0x64) + +#define SDRC_DLLB_CTRL (OMAP24XX_SDRC_BASE+0x68) + +#define SDRC_DLLB_STATUS (OMAP24XX_SDRC_BASE+0x6C) +#define DLLPHASE BIT1 +#define LOADDLL BIT2 +#define DLL_DELAY_MASK 0xFF00 +#define DLL_NO_FILTER_MASK (BIT8|BIT9) + + + +#define SDRC_POWER (OMAP24XX_SDRC_BASE+0x70) +#define SDRC_MCFG_0 (OMAP24XX_SDRC_BASE+0x80) +#define SDRC_MR_0 (OMAP24XX_SDRC_BASE+0x84) + +#define SDRC_MR_1 (OMAP24XX_SDRC_BASE+0xB4) + +#define SDRC_ACTIM_CTRLA_0 (OMAP24XX_SDRC_BASE+0x9C) +#define SDRC_ACTIM_CTRLB_0 (OMAP24XX_SDRC_BASE+0xA0) +#define SDRC_ACTIM_CTRLA_1 (OMAP24XX_SDRC_BASE+0xC4) +#define SDRC_ACTIM_CTRLB_1 (OMAP24XX_SDRC_BASE+0xC8) +#define SDRC_RFR_CTRL (OMAP24XX_SDRC_BASE+0xA4) +#define SDRC_MANUAL_0 (OMAP24XX_SDRC_BASE+0xA8) + +#define SDRC_MANUAL_1 (OMAP24XX_SDRC_BASE+0xD8) + + + +/* PRCM */ + +#define PRCM_CLKCFG_CTRL (OMAP24XX_CM_BASE+0x080) +#define CM_CLKSEL_MPU (OMAP24XX_CM_BASE+0x140) +#define CM_FCLKEN1_CORE (OMAP24XX_CM_BASE+0x200) +#define CM_FCLKEN2_CORE (OMAP24XX_CM_BASE+0x204) +#define CM_ICLKEN1_CORE (OMAP24XX_CM_BASE+0x210) +#define CM_ICLKEN2_CORE (OMAP24XX_CM_BASE+0x214) +#define CM_CLKSEL1_CORE (OMAP24XX_CM_BASE+0x240) +#define CM_CLKSEL_WKUP (OMAP24XX_CM_BASE+0x440) +#define CM_CLKSEL2_CORE (OMAP24XX_CM_BASE+0x244) +#define CM_CLKSEL_GFX (OMAP24XX_CM_BASE+0x340) +#define PM_RSTCTRL_WKUP (OMAP24XX_CM_BASE+0x450) +#define CM_CLKEN_PLL (OMAP24XX_CM_BASE+0x500) +#define CM_IDLEST_CKGEN (OMAP24XX_CM_BASE+0x520) +#define CM_CLKSEL1_PLL (OMAP24XX_CM_BASE+0x540) +#define CM_CLKSEL2_PLL (OMAP24XX_CM_BASE+0x544) +#define CM_CLKSEL_DSP (OMAP24XX_CM_BASE+0x840) + +/* SMX-APE */ +#define PM_RT_APE_BASE_ADDR_ARM (SMX_APE_BASE + 0x10000) +#define PM_GPMC_BASE_ADDR_ARM (SMX_APE_BASE + 0x12400) +#define PM_OCM_RAM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12800) +#define PM_OCM_ROM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12C00) + +/* IVA2 */ +#define PM_IVA2_BASE_ADDR_ARM (SMX_APE_BASE + 0x14000) + +#endif + diff --git a/include/asm-arm/arch-omap24xx/sys_info.h b/include/asm-arm/arch-omap24xx/sys_info.h index 53c231a..5f3cded 100644 --- a/include/asm-arm/arch-omap24xx/sys_info.h +++ b/include/asm-arm/arch-omap24xx/sys_info.h @@ -53,6 +53,7 @@ typedef struct h4_system_data { #define CPU_2420 0x2420 #define CPU_2422 0x2422 /* 2420 + 64M stacked */ #define CPU_2423 0x2423 /* 2420 + 96M stacked */ +#define CPU_2430 0x2430
#define CPU_2422_ES1 1 #define CPU_2422_ES2 2 @@ -60,19 +61,28 @@ typedef struct h4_system_data { #define CPU_2420_ES2 2 #define CPU_2420_2422_ES1 1
+#define CPU_2430_ES1 1 +#define CPU_2430_ES2 2 +#define CPU_2430_ES2_1_0 3 + #define CPU_2420_CHIPID 0x0B5D9000 +#define CPU_2430_CHIPID 0x0B68A000 #define CPU_24XX_ID_MASK 0x0FFFF000 #define CPU_242X_REV_MASK 0xF0000000 #define CPU_242X_PID_MASK 0x000F0000
#define BOARD_H4_MENELAUS 1 #define BOARD_H4_SDP 2 +#define BOARD_SDP_2430_M1 4 /* pre-T2 platform */ +#define BOARD_SDP_2430_T2 5 /* Triton2 companion chip */ +#define BOARD_GDP_2430_T2 6 /* 2430 GDP Variant */
#define GPMC_MUXED 1 #define GPMC_NONMUXED 0
#define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */ #define TYPE_NOR 0x000 +#define TYPE_ONENAND 0x800
#define WIDTH_8BIT 0x0000 #define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ diff --git a/include/configs/apollon.h b/include/configs/apollon.h index cec18d9..47d11c2 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -32,8 +32,8 @@ */ #define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP2420 1 /* which is in a 2420 */ -#define CONFIG_OMAP2420_APOLLON 1 +#define CONFIG_OMAP242X 1 /* which is in a 2420 */ +#define CONFIG_OMAP242X_APOLLON 1 #define CONFIG_APOLLON 1 #define CONFIG_APOLLON_PLUS 1 /* If you have apollon plus 1.x */
@@ -100,7 +100,7 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ -#define CONFIG_SYS_NS16550_COM1 OMAP2420_UART1 +#define CONFIG_SYS_NS16550_COM1 OMAP24XX_UART1
/* * select serial console configuration @@ -193,17 +193,17 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* memtest works on */ -#define CONFIG_SYS_MEMTEST_START (OMAP2420_SDRC_CS0) -#define CONFIG_SYS_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M) +#define CONFIG_SYS_MEMTEST_START (OMAP24XX_SDRC_CS0) +#define CONFIG_SYS_MEMTEST_END (OMAP24XX_SDRC_CS0+SZ_31M)
/* default load address */ -#define CONFIG_SYS_LOAD_ADDR (OMAP2420_SDRC_CS0) +#define CONFIG_SYS_LOAD_ADDR (OMAP24XX_SDRC_CS0)
/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) * or by 32KHz clk, or from external sig. This rate is divided by a local * divisor. */ -#define CONFIG_SYS_TIMERBASE OMAP2420_GPT2 +#define CONFIG_SYS_TIMERBASE OMAP24XX_GPT2 #define CONFIG_SYS_PTV 7 /* 2^(PTV+1) */ #define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
@@ -222,9 +222,9 @@ * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0 +#define PHYS_SDRAM_1 OMAP24XX_SDRC_CS0 #define PHYS_SDRAM_1_SIZE SZ_128M -#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1 +#define PHYS_SDRAM_2 OMAP24XX_SDRC_CS1
/*----------------------------------------------------------------------- * FLASH and environment organization diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index b0f442f..b312e76 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -33,7 +33,7 @@ */ #define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP2420 1 /* which is in a 2420 */ +#define CONFIG_OMAP242X 1 /* which is in a 2420 */ #define CONFIG_OMAP2420H4 1 /* and on a H4 board */ /*#define CONFIG_APTIX 1 #* define if on APTIX test chip */ /*#define CONFIG_VIRTIO 1 #* Using Virtio simulator */ @@ -70,9 +70,11 @@ /* * Size of malloc() pool */ -#define CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ +/* Total Size of Environment Sector */ +#define CONFIG_ENV_SIZE SZ_128K #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128
/* * Hardware drivers @@ -98,7 +100,7 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ -#define CONFIG_SYS_NS16550_COM1 OMAP2420_UART1 +#define CONFIG_SYS_NS16550_COM1 OMAP24XX_UART1
/* * select serial console configuration @@ -152,7 +154,8 @@ * Board NAND Info. */ #define CONFIG_NAND_LEGACY -#define CONFIG_SYS_NAND_ADDR 0x04000000 /* physical address to access nand at CS0*/ +/* physical address to access nand at CS0*/ +#define CONFIG_SYS_NAND_ADDR 0x04000000
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 @@ -210,13 +217,15 @@ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M) - -#define CONFIG_SYS_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */ +#define CONFIG_SYS_MEMTEST_START (OMAP24XX_SDRC_CS0) /*memtest works on*/ +#define CONFIG_SYS_MEMTEST_END (OMAP24XX_SDRC_CS0+SZ_31M) +/* default load addr */ +#define CONFIG_SYS_LOAD_ADDR (OMAP24XX_SDRC_CS0)
/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by * 32KHz clk, or from external sig. This rate is divided by a local divisor. @@ -227,7 +236,7 @@ #define V_PTV 7 /* use with 12MHz/128 */ #endif
-#define CONFIG_SYS_TIMERBASE OMAP2420_GPT2 +#define CONFIG_SYS_TIMERBASE OMAP24XX_GPT2 #define CONFIG_SYS_PTV V_PTV /* 2^(PTV+1) */ #define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
@@ -246,25 +255,32 @@ * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0 +#define PHYS_SDRAM_1 OMAP24XX_SDRC_CS0 #define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ -#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1 +#define PHYS_SDRAM_2 OMAP24XX_SDRC_CS1
#define PHYS_FLASH_SECT_SIZE SZ_128K #define PHYS_FLASH_1 H4_CS0_BASE /* Flash Bank #1 */ #define PHYS_FLASH_SIZE_1 SZ_32M -#define PHYS_FLASH_2 (H4_CS0_BASE+SZ_32M) /* same cs, 2 chips in series */ +/* same cs, 2 chips in series */ +#define PHYS_FLASH_2 (H4_CS0_BASE+SZ_32M) #define PHYS_FLASH_SIZE_2 SZ_32M
/*----------------------------------------------------------------------- * FLASH and environment organization */ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ -#define CONFIG_SYS_MONITOR_LEN SZ_128K /* Reserve 1 sector */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE_1 } +/* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 +/* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT (259) +/* Monitor at beginning of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +/* Reserve 1 sector */ +#define CONFIG_SYS_MONITOR_LEN SZ_128K +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ + CONFIG_SYS_FLASH_BASE \ + + PHYS_FLASH_SIZE_1 }
#ifdef CONFIG_SYS_NAND_BOOT #define CONFIG_ENV_IS_IN_NAND 1 @@ -273,7 +289,9 @@ #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + SZ_128K) #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE -#define CONFIG_ENV_OFFSET ( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN ) /* Environment after Monitor */ +/* Environment after Monitor */ +#define CONFIG_ENV_OFFSET (CONFIG_SYS_MONITOR_BASE \ + + CONFIG_SYS_MONITOR_LEN) #endif
/*----------------------------------------------------------------------- @@ -281,12 +299,16 @@ */ #define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ #define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */ +/* Use buffered writes (~10x faster) */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +/* Use hardware sector protection */ +#define CONFIG_SYS_FLASH_PROTECTION 1
/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Write */ +/* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ) +/* Timeout for Flash Write */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ)
#define CONFIG_SYS_JFFS2_MEM_NAND
diff --git a/onenand_ipl/board/apollon/low_levelinit.S b/onenand_ipl/board/apollon/low_levelinit.S index f7ee19f..6f1728e 100644 --- a/onenand_ipl/board/apollon/low_levelinit.S +++ b/onenand_ipl/board/apollon/low_levelinit.S @@ -98,7 +98,7 @@ lowlevel_init: strb r1, [r0]
/* SDRC setting */ - ldr r0, =OMAP2420_SDRC_BASE + ldr r0, =OMAP24XX_SDRC_BASE ldr r1, =0x00000010 str r1, [r0, #0x10]