On 2024/11/6 00:00, Jonas Karlman wrote:
Sort the nodes in rk3288-tinker u-boot.dtsi files in alphabetical order.
This has no intended change to board DTs and only rearrange nodes in preparation for future changes.
Signed-off-by: Jonas Karlman jonas@kwiboo.se
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
arch/arm/dts/rk3288-tinker-s-u-boot.dtsi | 8 ++--- arch/arm/dts/rk3288-tinker-u-boot.dtsi | 44 ++++++++++++------------ 2 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi index b4c5483146ab..a782f2f9804a 100644 --- a/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi +++ b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi @@ -17,18 +17,18 @@ bootph-pre-ram; };
-&emmc_clk { +&emmc_bus8 { bootph-pre-ram; };
-&emmc_cmd { +&emmc_clk { bootph-pre-ram; };
-&emmc_pwr { +&emmc_cmd { bootph-pre-ram; };
-&emmc_bus8 { +&emmc_pwr { bootph-pre-ram; }; diff --git a/arch/arm/dts/rk3288-tinker-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-u-boot.dtsi index 0cf1b696d168..032dac221c24 100644 --- a/arch/arm/dts/rk3288-tinker-u-boot.dtsi +++ b/arch/arm/dts/rk3288-tinker-u-boot.dtsi @@ -17,6 +17,10 @@ rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>; };
+&gpio7 {
- bootph-pre-ram;
+};
- &i2c2 { m24c08@50 { compatible = "at,24c08", "i2c-eeprom";
@@ -24,31 +28,15 @@ }; };
-&pinctrl {
- bootph-all;
-};
-&uart2 {
- bootph-all;
-};
-&uart2_xfer {
- bootph-all;
-};
-&sdmmc {
- bootph-pre-ram;
-};
-&gpio7 { +&pcfg_pull_none { bootph-pre-ram; };
-&vcc_sd { +&pcfg_pull_none_drv_8ma { bootph-pre-ram; };
-&pcfg_pull_none_drv_8ma { +&pcfg_pull_up { bootph-pre-ram; };
@@ -56,11 +44,11 @@ bootph-pre-ram; };
-&pcfg_pull_none {
- bootph-pre-ram;
+&pinctrl {
- bootph-all; };
-&pcfg_pull_up { +&sdmmc { bootph-pre-ram; };
@@ -83,3 +71,15 @@ &sdmmc_pwr { bootph-pre-ram; };
+&uart2 {
- bootph-all;
+};
+&uart2_xfer {
- bootph-all;
+};
+&vcc_sd {
- bootph-pre-ram;
+};