Add below test cases for mii commands: mii_info -To display MII PHY info mii_list - To list MII devices mii_set_device - To set MII device mii_read - To reads register from MII PHY address mii_dump - To display data from MII PHY address
Signed-off-by: Love Kumar love.kumar@amd.com --- test/py/tests/test_mii.py | 68 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 test/py/tests/test_mii.py
diff --git a/test/py/tests/test_mii.py b/test/py/tests/test_mii.py new file mode 100644 index 000000000000..b213df3e3f2e --- /dev/null +++ b/test/py/tests/test_mii.py @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +# (C) Copyright 2023, Advanced Micro Devices, Inc. + +import pytest +import re + +""" +Note: This test doesn't rely on boardenv_* configuration value but they can +change test behavior. + +For example: + +# Setup env__mii_deive_test_skip to True if tests with ethernet PHY devices +# should be skipped. For example: Missing PHY device +env__mii_device_test_skip = True + +It also checks for MII PHY device exist or not, it skips the test if PHY device +does not exist. +""" + +@pytest.mark.buildconfigspec("cmd_mii") +def test_mii_info(u_boot_console): + if u_boot_console.config.env.get("env__mii_device_test_skip", False): + pytest.skip("MII device test is not enabled!") + expected_output = "PHY" + output = u_boot_console.run_command("mii info") + if not re.search(r"PHY (.+?):", output): + pytest.skip("PHY device does not exist!") + assert expected_output in output + +@pytest.mark.buildconfigspec("cmd_mii") +def test_mii_list(u_boot_console): + if u_boot_console.config.env.get("env__mii_device_test_skip", False): + pytest.skip("MII device test is not enabled!") + expected_output = "Current device" + output = u_boot_console.run_command("mii device") + if not re.search(r"Current device: '(.+?)'", output): + pytest.skip("PHY device does not exist!") + assert expected_output in output + +@pytest.mark.buildconfigspec("cmd_mii") +def test_mii_set_device(u_boot_console): + test_mii_list(u_boot_console) + output = u_boot_console.run_command("mii device") + eth_num = re.search(r"MII devices: '(.+?)'", output).groups()[0] + u_boot_console.run_command(f"mii device {eth_num}") + output = u_boot_console.run_command("echo $?") + assert output.endswith("0") + +@pytest.mark.buildconfigspec("cmd_mii") +def test_mii_read(u_boot_console): + test_mii_list(u_boot_console) + output = u_boot_console.run_command("mii info") + eth_addr = hex(int(re.search(r"PHY (.+?):", output).groups()[0], 16)) + u_boot_console.run_command(f"mii read {eth_addr} 0") + output = u_boot_console.run_command("echo $?") + assert output.endswith("0") + +@pytest.mark.buildconfigspec("cmd_mii") +def test_mii_dump(u_boot_console): + test_mii_list(u_boot_console) + expected_response = "PHY control register" + output = u_boot_console.run_command("mii info") + eth_addr = hex(int(re.search(r"PHY (.+?):", output).groups()[0], 16)) + response = u_boot_console.run_command(f"mii dump {eth_addr} 0") + assert expected_response in response + output = u_boot_console.run_command("echo $?") + assert output.endswith("0")