This is used by a few boards but we are years past the migration date, so let's drop it now.
Signed-off-by: Simon Glass sjg@chromium.org ---
README | 7 ------- include/configs/omap3_beagle.h | 3 --- include/configs/sniper.h | 14 -------------- include/configs/tqma6.h | 3 --- include/i2c.h | 2 +- 5 files changed, 1 insertion(+), 28 deletions(-)
diff --git a/README b/README index b89768f1791..9fd2aee4b04 100644 --- a/README +++ b/README @@ -883,13 +883,6 @@ The following options need to be configured: You should define these to the GPIO value as given directly to the generic GPIO functions.
- CFG_I2C_MULTI_BUS - - This option allows the use of multiple I2C buses, each of which - must have a controller. At any point in time, only one bus is - active. To switch to a different bus, use the 'i2c dev' command. - Note that bus numbering is zero-based. - CFG_SYS_I2C_NOPROBES
This option specifies a list of I2C devices that will be skipped diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index af7cb3513f8..b616dd2608c 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -28,9 +28,6 @@ /* NAND: SPL falcon mode configs */ #endif /* CONFIG_MTD_RAW_NAND */
-/* Enable Multi Bus support for I2C */ -#define CFG_I2C_MULTI_BUS - /* DSS Support */
/* TWL4030 LED Support */ diff --git a/include/configs/sniper.h b/include/configs/sniper.h index 45a3102aeee..d0ae5e18605 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -34,20 +34,6 @@
#define CFG_SYS_SDRAM_BASE 0x80000000
-/* - * I2C - */ - -#define CFG_I2C_MULTI_BUS - -/* - * Input - */ - -/* - * SPL - */ - /* * Serial */ diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index 2da76f15431..ceeed174ec5 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -26,9 +26,6 @@
#define TQMA6_SPI_FLASH_SECTOR_SIZE SZ_64K
-/* I2C Configs */ -#define CFG_I2C_MULTI_BUS - #if !defined(CONFIG_DM_PMIC) #define CFG_POWER_PFUZE100_I2C_ADDR 0x08 #define TQMA6_PFUZE100_I2C_BUS 2 diff --git a/include/i2c.h b/include/i2c.h index 1d3be3f6759..622540c8265 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -942,7 +942,7 @@ unsigned int i2c_get_bus_speed(void); * only for backwardcompatibility, should go away if we switched * completely to new multibus support. */ -#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || defined(CFG_I2C_MULTI_BUS) +#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) # if !defined(CFG_SYS_MAX_I2C_BUS) # define CFG_SYS_MAX_I2C_BUS 2 # endif