-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256
Hi,
On 31.01.2016 16:17, Simon Glass wrote:
On 24 January 2016 at 13:53, Mateusz Kulikowski mateusz.kulikowski@gmail.com wrote:
[...]
For the readme, can you please do a patch to add a few more things?
- How to enter fastboot mode
I've added it (sorry, it was kind-of obvious for me :) ).
- How pressing power on reset works - it didn't do anything for me
For now it's not very helpful as by pressing vol- you end up in fastboot first.
But, if you then use fastboot to load u-boot it will stop autoboot command (In case you don't have serial port).
========================= U-Boot 2016.03-rc1-00047-gffd9b24 (Feb 07 2016 - 22:03:00 +0100) Qualcomm-DragonBoard 410C
DRAM: 986 MiB MMC: sdhci@07824000: 0, sdhci@07864000: 1 Using default environment
In: serial@78b0000 Out: serial@78b0000 Err: serial@78b0000 Power button pressed - dropping to console. Net: Net Initialization Skipped No ethernet found. dragonboard410c => ========================
Once I enable UDC controller it will launch fastboot/dfu mode. This will be especially useful when U-Boot will replace little-kernel (that's my goal eventually).
Regards, Mateusz