Add support for gpio controllers on Qualcomm Snapdragon devices. This devices are usually called Top Level Mode Multiplexing in Qualcomm documentation.
Signed-off-by: Mateusz Kulikowski mateusz.kulikowski@gmail.com Reviewed-by: Simon Glass sjg@chromium.org Tested-by: Simon Glass sjg@chromium.org ---
Changes in v4: None Changes in v3: None Changes in v2: - Reordered includes (again) - Added newlines between returns - Fixed error handling in msm_gpio_probe - Added reviewed-by
Changes in v1: - Added dt binding documentation - Added help to KConfig - Use clrsetbits() to switch direction - Fixed include order - Added #defines for registers/register fields - Added secondary compatible string
doc/device-tree-bindings/gpio/gpio-msm.txt | 22 +++++ drivers/gpio/Kconfig | 14 +++ drivers/gpio/Makefile | 1 + drivers/gpio/msm_gpio.c | 135 +++++++++++++++++++++++++++++ 4 files changed, 172 insertions(+) create mode 100644 doc/device-tree-bindings/gpio/gpio-msm.txt create mode 100644 drivers/gpio/msm_gpio.c
diff --git a/doc/device-tree-bindings/gpio/gpio-msm.txt b/doc/device-tree-bindings/gpio/gpio-msm.txt new file mode 100644 index 0000000..966ce0a --- /dev/null +++ b/doc/device-tree-bindings/gpio/gpio-msm.txt @@ -0,0 +1,22 @@ +Qualcomm Snapdragon GPIO controller + +Required properties: +- compatible : "qcom,msm8916-pinctrl" or "qcom,apq8016-pinctrl" +- reg : Physical base address and length of the controller's registers. + This controller is called "Top Level Mode Multiplexing" in + Qualcomm documentation. +- #gpio-cells : Should be one (pin number). +- gpio-controller : Marks the device node as a GPIO controller. +- gpio-count: Number of GPIO pins. +- gpio-bank-name: (optional) name of gpio bank. As default "soc" is used. + +Example: + +soc_gpios: pinctrl@1000000 { + compatible = "qcom,msm8916-pinctrl"; + reg = <0x1000000 0x300000>; + gpio-controller; + gpio-count = <122>; + gpio-bank-name="soc"; + #gpio-cells = <1>; +}; diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 2311309..4d9e74c 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -55,6 +55,20 @@ config LPC32XX_GPIO help Support for the LPC32XX GPIO driver.
+config MSM_GPIO + bool "Qualcomm GPIO driver" + depends on DM_GPIO + default n + help + Support GPIO controllers on Qualcomm Snapdragon family of SoCs. + This controller have single bank (default name "soc"), every + gpio has it's own set of registers. + Only simple GPIO operations are supported (get/set, change of + direction and checking pin function). + Supported devices: + - APQ8016 + - MSM8916 + config ROCKCHIP_GPIO bool "Rockchip GPIO driver" depends on DM_GPIO diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index ea6e2ed..4162c3c 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -50,3 +50,4 @@ obj-$(CONFIG_VYBRID_GPIO) += vybrid_gpio.o obj-$(CONFIG_HIKEY_GPIO) += hi6220_gpio.o obj-$(CONFIG_PIC32_GPIO) += pic32_gpio.o obj-$(CONFIG_MVEBU_GPIO) += mvebu_gpio.o +obj-$(CONFIG_MSM_GPIO) += msm_gpio.o diff --git a/drivers/gpio/msm_gpio.c b/drivers/gpio/msm_gpio.c new file mode 100644 index 0000000..950f309 --- /dev/null +++ b/drivers/gpio/msm_gpio.c @@ -0,0 +1,135 @@ +/* + * Qualcomm GPIO driver + * + * (C) Copyright 2015 Mateusz Kulikowski mateusz.kulikowski@gmail.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <asm/gpio.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Register offsets */ +#define GPIO_CONFIG_OFF(no) ((no) * 0x1000) +#define GPIO_IN_OUT_OFF(no) ((no) * 0x1000 + 0x4) + +/* OE */ +#define GPIO_OE_DISABLE (0x0 << 9) +#define GPIO_OE_ENABLE (0x1 << 9) +#define GPIO_OE_MASK (0x1 << 9) + +/* GPIO_IN_OUT register shifts. */ +#define GPIO_IN 0 +#define GPIO_OUT 1 + +struct msm_gpio_bank { + phys_addr_t base; +}; + +static int msm_gpio_direction_input(struct udevice *dev, unsigned int gpio) +{ + struct msm_gpio_bank *priv = dev_get_priv(dev); + phys_addr_t reg = priv->base + GPIO_CONFIG_OFF(gpio); + + /* Disable OE bit */ + clrsetbits_le32(reg, GPIO_OE_MASK, GPIO_OE_DISABLE); + + return 0; +} + +static int msm_gpio_set_value(struct udevice *dev, unsigned gpio, int value) +{ + struct msm_gpio_bank *priv = dev_get_priv(dev); + + value = !!value; + /* set value */ + writel(value << GPIO_OUT, priv->base + GPIO_IN_OUT_OFF(gpio)); + + return 0; +} + +static int msm_gpio_direction_output(struct udevice *dev, unsigned gpio, + int value) +{ + struct msm_gpio_bank *priv = dev_get_priv(dev); + phys_addr_t reg = priv->base + GPIO_CONFIG_OFF(gpio); + + value = !!value; + /* set value */ + writel(value << GPIO_OUT, priv->base + GPIO_IN_OUT_OFF(gpio)); + /* switch direction */ + clrsetbits_le32(reg, GPIO_OE_MASK, GPIO_OE_ENABLE); + + return 0; +} + +static int msm_gpio_get_value(struct udevice *dev, unsigned gpio) +{ + struct msm_gpio_bank *priv = dev_get_priv(dev); + + return !!(readl(priv->base + GPIO_IN_OUT_OFF(gpio)) >> GPIO_IN); +} + +static int msm_gpio_get_function(struct udevice *dev, unsigned offset) +{ + struct msm_gpio_bank *priv = dev_get_priv(dev); + + if (readl(priv->base + GPIO_CONFIG_OFF(offset)) & GPIO_OE_ENABLE) + return GPIOF_OUTPUT; + + return GPIOF_INPUT; +} + +static const struct dm_gpio_ops gpio_msm_ops = { + .direction_input = msm_gpio_direction_input, + .direction_output = msm_gpio_direction_output, + .get_value = msm_gpio_get_value, + .set_value = msm_gpio_set_value, + .get_function = msm_gpio_get_function, +}; + +static int msm_gpio_probe(struct udevice *dev) +{ + struct msm_gpio_bank *priv = dev_get_priv(dev); + + priv->base = dev_get_addr(dev); + + return priv->base == FDT_ADDR_T_NONE ? -EINVAL : 0; +} + +static int msm_gpio_ofdata_to_platdata(struct udevice *dev) +{ + struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); + + uc_priv->gpio_count = fdtdec_get_int(gd->fdt_blob, dev->of_offset, + "gpio-count", 0); + uc_priv->bank_name = fdt_getprop(gd->fdt_blob, dev->of_offset, + "gpio-bank-name", NULL); + if (uc_priv->bank_name == NULL) + uc_priv->bank_name = "soc"; + + return 0; +} + +static const struct udevice_id msm_gpio_ids[] = { + { .compatible = "qcom,msm8916-pinctrl" }, + { .compatible = "qcom,apq8016-pinctrl" }, + { } +}; + +U_BOOT_DRIVER(gpio_msm) = { + .name = "gpio_msm", + .id = UCLASS_GPIO, + .of_match = msm_gpio_ids, + .ofdata_to_platdata = msm_gpio_ofdata_to_platdata, + .probe = msm_gpio_probe, + .ops = &gpio_msm_ops, + .priv_auto_alloc_size = sizeof(struct msm_gpio_bank), +}; + +