čt 12. 9. 2019 v 12:45 odesílatel Michal Simek michal.simek@xilinx.com napsal:
From: Siva Durga Prasad Paladugu siva.durga.paladugu@xilinx.com
This patch assings the phynode pointer to the phydev node as it is needed later in the corresponding phy driver to read phy properties from DT.
Signed-off-by: Siva Durga Prasad Paladugu siva.durga.paladugu@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com
This feature is present in these drivers: drivers/net/ti/am65-cpsw-nuss.c:573: phydev->node = priv->phy_node; drivers/net/ti/cpsw.c:853: phydev->node = offset_to_ofnode(slave->data->phy_of_handle); drivers/net/ti/keystone_net.c:594: priv->phydev->node = offset_to_ofnode(priv->phy_of_handle); drivers/net/zynq_gem.c:322: priv->phydev->node = priv->phy_of_node;
drivers/net/xilinx_axi_emac.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c index 26c21c6d70fa..36d651109cbc 100644 --- a/drivers/net/xilinx_axi_emac.c +++ b/drivers/net/xilinx_axi_emac.c @@ -93,6 +93,7 @@ struct axidma_priv { struct phy_device *phydev; struct mii_dev *bus; u8 eth_hasnobuf;
int phy_of_handle;};
/* BD descriptors */ @@ -276,6 +277,8 @@ static int axiemac_phy_init(struct udevice *dev) phydev->supported &= supported; phydev->advertising = phydev->supported; priv->phydev = phydev;
if (priv->phy_of_handle)priv->phydev->node = offset_to_ofnode(priv->phy_of_handle); phy_config(phydev); return 0;@@ -736,8 +739,10 @@ static int axi_emac_ofdata_to_platdata(struct udevice *dev) priv->phyaddr = -1;
offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "phy-handle");
if (offset > 0)
if (offset > 0) { priv->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, "reg", -1);priv->phy_of_handle = offset;} phy_mode = fdt_getprop(gd->fdt_blob, node, "phy-mode", NULL); if (phy_mode)-- 2.17.1
Applied. Patchwork assigned this to me. M