Update the RZ/G2M dtsi and r8a774a1-beacon-rzg2m-kit kit from Renesas repo destined to become 5.12-rc1.
Signed-off-by: Adam Ford aford173@gmail.com --- arch/arm/dts/beacon-renesom-baseboard.dtsi | 359 ++++++++++++++++----- arch/arm/dts/beacon-renesom-som.dtsi | 57 +++- arch/arm/dts/r8a774a1-beacon-rzg2m-kit.dts | 59 +++- arch/arm/dts/r8a774a1.dtsi | 74 ++++- 4 files changed, 445 insertions(+), 104 deletions(-)
V2: No Change
diff --git a/arch/arm/dts/beacon-renesom-baseboard.dtsi b/arch/arm/dts/beacon-renesom-baseboard.dtsi index 8a472c057a..5f998d4706 100644 --- a/arch/arm/dts/beacon-renesom-baseboard.dtsi +++ b/arch/arm/dts/beacon-renesom-baseboard.dtsi @@ -5,35 +5,27 @@
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/clk/versaclock.h>
/ { - aliases { - serial0 = &scif2; - serial1 = &hscif0; - serial2 = &hscif1; - serial3 = &scif0; - serial4 = &hscif2; - serial5 = &scif5; - spi0 = &msiof0; - spi1 = &msiof1; - spi2 = &msiof2; - spi3 = &msiof3; - ethernet0 = &avb; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - backlight: backlight { + backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; power-supply = <®_lcd>; enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_HIGH>; - pwms = <&pwm0 0 50000>; + pwms = <&pwm2 0 25000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; };
+ backlight_dpi: backlight-dpi { + compatible = "pwm-backlight"; + power-supply = <®_lcd>; + enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>; + pwms = <&pwm0 0 25000>; + brightness-levels = <0 25 33 50 63 75 88 100>; + default-brightness-level = <6>; + }; + hdmi0-out { compatible = "hdmi-connector"; type = "a"; @@ -48,38 +40,38 @@ keys { compatible = "gpio-keys";
- key-1 { + key-1 { /* S19 */ gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; - linux,code = <KEY_1>; - label = "Switch-1"; + linux,code = <KEY_UP>; + label = "Up"; wakeup-source; debounce-interval = <20>; }; - key-2 { + key-2 { /*S20 */ gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; - linux,code = <KEY_2>; - label = "Switch-2"; + linux,code = <KEY_LEFT>; + label = "Left"; wakeup-source; debounce-interval = <20>; }; - key-3 { + key-3 { /* S21 */ gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; - linux,code = <KEY_3>; - label = "Switch-3"; + linux,code = <KEY_DOWN>; + label = "Down"; wakeup-source; debounce-interval = <20>; }; - key-4 { + key-4 { /* S22 */ gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; - linux,code = <KEY_4>; - label = "Switch-4"; + linux,code = <KEY_RIGHT>; + label = "Right"; wakeup-source; debounce-interval = <20>; }; - key-5 { + key-5 { /* S23 */ gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; - linux,code = <KEY_5>; - label = "Switch-4"; + linux,code = <KEY_ENTER>; + label = "Center"; wakeup-source; debounce-interval = <20>; }; @@ -98,17 +90,59 @@ led1 { gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; label = "LED1"; - linux,default-trigger = "heartbeat"; }; led2 { gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; label = "LED2"; - linux,default-trigger = "heartbeat"; }; led3 { gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; label = "LED3"; - linux,default-trigger = "heartbeat"; + }; + }; + + lvds { + compatible = "panel-lvds"; + power-supply = <®_lcd_reset>; + width-mm = <223>; + height-mm = <125>; + backlight = <&backlight_lvds>; + data-mapping = "vesa-24"; + + panel-timing { + /* 800x480@60Hz */ + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hsync-len = <48>; + hfront-porch = <40>; + hback-porch = <40>; + vfront-porch = <13>; + vback-porch = <29>; + vsync-len = <1>; + hsync-active = <1>; + vsync-active = <3>; + de-active = <1>; + pixelclk-active = <0>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + rgb { + /* Different LCD with compatible timings */ + compatible = "rocktech,rk070er9427"; + backlight = <&backlight_dpi>; + enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + power-supply = <®_lcd>; + port { + rgb_panel: endpoint { + remote-endpoint = <&du_out_rgb>; + }; }; };
@@ -117,7 +151,7 @@ regulator-name = "audio-1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&gpio_exp2 7 GPIO_ACTIVE_HIGH>; + gpio = <&gpio_exp4 1 GPIO_ACTIVE_HIGH>; enable-active-high; };
@@ -167,15 +201,12 @@
vccq_sdhi0: regulator-vccq-sdhi0 { compatible = "regulator-gpio"; - regulator-name = "SDHI0 VccQ"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; gpios-states = <1>; states = <3300000 1>, <1800000 0>; - regulator-always-on; };
/* External DU dot clocks */ @@ -190,10 +221,29 @@ #clock-cells = <0>; clock-frequency = <25000000>; }; -};
-&audio_clk_a { - clock-frequency = <22579200>; + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hs_ep: endpoint { + remote-endpoint = <&usb3_hs_ep>; + }; + }; + port@1 { + reg = <1>; + ss_ep: endpoint { + remote-endpoint = <&hd3ss3220_in_ep>; + }; + }; + }; + }; };
&audio_clk_b { @@ -214,30 +264,19 @@ status = "okay"; };
-&du { - pinctrl-0 = <&du_pins>; - pinctrl-names = "default"; - status = "okay"; - - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, - <&versaclock5 1>, - <&x302_clk>, - <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", - "dclkin.0", "dclkin.1", "dclkin.2"; +&du_out_rgb { + remote-endpoint = <&rgb_panel>; };
&ehci0 { dr_mode = "otg"; status = "okay"; - clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&versaclock5 3>, <&versaclock6_bb 4>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&versaclock5 3>; };
&ehci1 { status = "okay"; - clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&versaclock5 4>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; };
&hdmi0 { @@ -258,7 +297,6 @@ }; }; port@2 { - /* HDMI sound */ reg = <2>; dw_hdmi0_snd_in: endpoint { remote-endpoint = <&rsnd_endpoint1>; @@ -281,7 +319,7 @@
&i2c2 { status = "okay"; - clock-frequency = <100000>; + clock-frequency = <400000>; pinctrl-0 = <&i2c2_pins>; pinctrl-names = "default";
@@ -299,18 +337,49 @@ #gpio-cells = <2>; };
- versaclock6_bb: versaclock6_bb@6a { + gpio_exp4: gpio@23 { + compatible = "onnn,pca9654"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + versaclock6_bb: clock-controller@6a { compatible = "idt,5p49v6965"; reg = <0x6a>; #clock-cells = <1>; clocks = <&x304_clk>; clock-names = "xin"; - /* CSI0_MCLK, CSI1_MCLK, AUDIO_CLKIN, USB_HUB_MCLK_BB */ + assigned-clocks = <&versaclock6_bb 1>, <&versaclock6_bb 2>, <&versaclock6_bb 3>, <&versaclock6_bb 4>; - assigned-clock-rates = <24000000>, <24000000>, <24000000>, <24000000>; + assigned-clock-rates = <24000000>, <24000000>, <24000000>, <24576000>; + + OUT1 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <1800000>; + idt,slew-percent = <100>; + }; + + OUT2 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <1800000>; + idt,slew-percent = <100>; + }; + + OUT3 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <3300000>; + idt,slew-percent = <100>; + }; + + OUT4 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <3300000>; + idt,slew-percent = <100>; + }; }; };
@@ -324,13 +393,14 @@
&i2c5 { status = "okay"; - clock-frequency = <100000>; + clock-frequency = <400000>; pinctrl-0 = <&i2c5_pins>; pinctrl-names = "default";
codec: wm8962@1a { compatible = "wlf,wm8962"; reg = <0x1a>; + clocks = <&versaclock6_bb 3>; DCVDD-supply = <®_audio>; DBVDD-supply = <®_audio>; AVDD-supply = <®_audio>; @@ -375,6 +445,49 @@ interrupts = <9 IRQ_TYPE_EDGE_RISING>; wakeup-source; }; + + hd3ss3220@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + interrupt-parent = <&gpio6>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hd3ss3220_in_ep: endpoint { + remote-endpoint = <&ss_ep>; + }; + }; + port@1 { + reg = <1>; + hd3ss3220_out_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; + }; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&msiof1 { + pinctrl-0 = <&msiof1_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; };
&ohci0 { @@ -440,6 +553,11 @@ function = "pwm0"; };
+ pwm2_pins: pwm2 { + groups = "pwm2_a"; + function = "pwm2"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; @@ -458,7 +576,7 @@ };
sound_clk_pins: sound_clk { - groups = "audio_clk_a_a"; + groups = "audio_clk_a_a", "audio_clk_b_a"; function = "audio_clk"; };
@@ -490,6 +608,12 @@ status = "okay"; };
+&pwm2 { + pinctrl-0 = <&pwm2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &rcar_sound { pinctrl-0 = <&sound_pins &sound_clk_pins>; pinctrl-names = "default"; @@ -503,23 +627,6 @@
status = "okay";
- clocks = <&cpg CPG_MOD 1005>, - <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, - <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, - <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, - <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, - <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, - <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, - <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, - <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, - <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, - <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, - <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, - <&cpg CPG_CORE R8A774A1_CLK_S0D4>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -551,6 +658,11 @@ }; };
+&rwdt { + status = "okay"; + timeout-sec = <60>; +}; + &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; @@ -584,6 +696,26 @@ shared-pin; };
+&tmu0 { + status = "okay"; +}; + +&tmu1 { + status = "okay"; +}; + +&tmu2 { + status = "okay"; +}; + +&tmu3 { + status = "okay"; +}; + +&tmu4 { + status = "okay"; +}; + &usb2_phy0 { pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; @@ -595,3 +727,62 @@ pinctrl-names = "default"; status = "okay"; }; + +&usb3_peri0 { + companion = <&xhci0>; + status = "okay"; + usb-role-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + usb3_hs_ep: endpoint { + remote-endpoint = <&hs_ep>; + }; + }; + port@1 { + reg = <1>; + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_out_ep>; + }; + }; + }; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&vin0 { + status = "okay"; +}; +&vin1 { + status = "okay"; +}; +&vin2 { + status = "okay"; +}; +&vin3 { + status = "okay"; +}; +&vin4 { + status = "okay"; +}; +&vin5 { + status = "okay"; +}; +&vin6 { + status = "okay"; +}; +&vin7 { + status = "okay"; +}; + +&xhci0 +{ + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/dts/beacon-renesom-som.dtsi b/arch/arm/dts/beacon-renesom-som.dtsi index 6c16a2732a..9565495b49 100644 --- a/arch/arm/dts/beacon-renesom-som.dtsi +++ b/arch/arm/dts/beacon-renesom-som.dtsi @@ -4,17 +4,18 @@ */
#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clk/versaclock.h>
/ { memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x78000000>; + reg = <0x0 0x48000000 0x0 0xc000000>; };
- memory@600000000 { + memory@57000000 { device_type = "memory"; - reg = <0x6 0x00000000 0x0 0x80000000>; + reg = <0x0 0x57000000 0x0 0x29000000>; };
osc_32k: osc_32k { @@ -55,7 +56,8 @@ pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; phy-handle = <&phy0>; - phy-mode = "rgmii-id"; + rx-internal-delay-ps = <1800>; + tx-internal-delay-ps = <2000>; status = "okay";
phy0: ethernet-phy@0 { @@ -88,7 +90,6 @@ pinctrl-names = "default"; uart-has-rtscts; status = "okay"; - max-speed = <4000000>;
bluetooth { compatible = "brcm,bcm43438-bt"; @@ -97,6 +98,7 @@ device-wakeup-gpios = <&pca9654 5 GPIO_ACTIVE_HIGH>; clocks = <&osc_32k>; clock-names = "extclk"; + max-speed = <4000000>; }; };
@@ -108,7 +110,7 @@
&i2c4 { status = "okay"; - clock-frequency = <400000>; + clock-frequency = <100000>;
pca9654: gpio@20 { compatible = "onnn,pca9654"; @@ -147,7 +149,7 @@ };
eeprom@50 { - compatible = "microchip, at24c64", "atmel,24c64"; + compatible = "microchip,at24c64", "atmel,24c64"; pagesize = <32>; read-only; /* Manufacturing EEPROM programmed at factory */ reg = <0x50>; @@ -169,7 +171,32 @@ <&versaclock5 2>, <&versaclock5 3>, <&versaclock5 4>; + assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>; + + OUT1 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <1800000>; + idt,slew-percent = <100>; + }; + + OUT2 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <1800000>; + idt,slew-percent = <100>; + }; + + OUT3 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <1800000>; + idt,slew-percent = <100>; + }; + + OUT4 { + idt,mode = <VC5_CMOS>; + idt,voltage-microvolt = <3300000>; + idt,slew-percent = <100>; + }; }; };
@@ -295,18 +322,14 @@ status = "okay"; };
-&usb_extal_clk { - clock-frequency = <50000000>; +&usb2_clksel { + status = "okay"; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, + <&versaclock5 3>, <&usb3s0_clk>; + clock-names = "ehci_ohci", "hs-usb-if", + "usb_extal", "usb_xtal"; };
&usb3s0_clk { clock-frequency = <100000000>; }; - -&vspb { - status = "okay"; -}; - -&vspi0 { - status = "okay"; -}; diff --git a/arch/arm/dts/r8a774a1-beacon-rzg2m-kit.dts b/arch/arm/dts/r8a774a1-beacon-rzg2m-kit.dts index e7ed5d4806..501cb05da2 100644 --- a/arch/arm/dts/r8a774a1-beacon-rzg2m-kit.dts +++ b/arch/arm/dts/r8a774a1-beacon-rzg2m-kit.dts @@ -10,6 +10,61 @@ #include "beacon-renesom-baseboard.dtsi"
/ { - model = "Beacon Embedded Works RZ/G2M Development Kit"; - compatible = "beacon,beacon-rzg2m", "renesas,r8a774a1"; + model = "Beacon EmbeddedWorks RZ/G2M Development Kit"; + compatible = "beacon,beacon-rzg2m", "renesas,r8a774a1"; + + aliases { + serial0 = &scif2; + serial1 = &hscif0; + serial2 = &hscif1; + serial3 = &scif0; + serial4 = &hscif2; + serial5 = &scif5; + ethernet0 = &avb; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x80000000>; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; + +/* Reference versaclock instead of audio_clk_a */ +&rcar_sound { + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&versaclock6_bb 4>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A774A1_CLK_S0D4>; }; diff --git a/arch/arm/dts/r8a774a1.dtsi b/arch/arm/dts/r8a774a1.dtsi index 8e80f50132..d64fb8b1b8 100644 --- a/arch/arm/dts/r8a774a1.dtsi +++ b/arch/arm/dts/r8a774a1.dtsi @@ -408,7 +408,7 @@ resets = <&cpg 905>; };
- pfc: pin-controller@e6060000 { + pfc: pinctrl@e6060000 { compatible = "renesas,pfc-r8a774a1"; reg = <0 0xe6060000 0 0x50c>; }; @@ -835,6 +835,21 @@ status = "disabled"; };
+ usb2_clksel: clock-controller@e6590630 { + compatible = "renesas,r8a774a1-rcar-usb2-clock-sel", + "renesas,rcar-gen3-usb2-clock-sel"; + reg = <0 0xe6590630 0 0x02>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, + <&usb_extal_clk>, <&usb3s0_clk>; + clock-names = "ehci_ohci", "hs-usb-if", + "usb_extal", "usb_xtal"; + #clock-cells = <0>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + reset-names = "ehci_ohci", "hs-usb-if"; + status = "disabled"; + }; + usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a774a1-usb-dmac", "renesas,usb-dmac"; @@ -1115,6 +1130,8 @@ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; @@ -2300,6 +2317,23 @@ status = "disabled"; };
+ rpc: spi@ee200000 { + compatible = "renesas,r8a774a1-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x4000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + clock-names = "rpc"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -2371,6 +2405,44 @@ status = "disabled"; };
+ pciec0_ep: pcie-ep@fe000000 { + compatible = "renesas,r8a774a1-pcie-ep", + "renesas,rcar-gen3-pcie-ep"; + reg = <0x0 0xfe000000 0 0x80000>, + <0x0 0xfe100000 0 0x100000>, + <0x0 0xfe200000 0 0x200000>, + <0x0 0x30000000 0 0x8000000>, + <0x0 0x38000000 0 0x8000000>; + reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>; + clock-names = "pcie"; + resets = <&cpg 319>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pciec1_ep: pcie-ep@ee800000 { + compatible = "renesas,r8a774a1-pcie-ep", + "renesas,rcar-gen3-pcie-ep"; + reg = <0x0 0xee800000 0 0x80000>, + <0x0 0xee900000 0 0x100000>, + <0x0 0xeea00000 0 0x200000>, + <0x0 0xc0000000 0 0x8000000>, + <0x0 0xc8000000 0 0x8000000>; + reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + clock-names = "pcie"; + resets = <&cpg 318>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + status = "disabled"; + }; + fdp1@fe940000 { compatible = "renesas,fdp1"; reg = <0 0xfe940000 0 0x2400>;