Hi,
On Wednesday 08 February 2017 11:21 PM, Davis, Andrew wrote:
FIT support in the net boot case is much like the RAM boot case in that we load our image to "load_addr" and pass a dummy read function into "spl_load_simple_fit()". As the load address is no longer hard-coded to the final execution address, RAW image loading will rely on "load_addr" pointing to the execution address as they should have before.
[...]
#if defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USBETH_SUPPORT) +static ulong spl_net_load_read(struct spl_load_info *load, ulong sector,
ulong count, void *buf)+{
- debug("%s: sector %lx, count %lx, buf %lx\n",
__func__, sector, count, (ulong)buf);- memcpy(buf, (void *)(load_addr + sector), count);
- return count;
+}
static int spl_net_load_image(struct spl_image_info *spl_image, struct spl_boot_device *bootdev) {
struct image_header *header = (struct image_header *)load_addr; int rv;
env_init(); env_relocate(); setenv("autoload", "yes");
- load_addr = CONFIG_SYS_TEXT_BASE - sizeof(struct image_header);
This breaks when FIT image is not used (For example, breaks am335x_evm_usbspl_defconfig)
Below snippet helps non FIT case:
+ if (!IS_ENABLED(CONFIG_SPL_LOAD_FIT)) + load_addr = CONFIG_SYS_TEXT_BASE - sizeof(struct image_header); +
rv = eth_initialize(); if (rv == 0) { printf("No Ethernet devices found\n"); @@ -36,8 +46,22 @@ static int spl_net_load_image(struct spl_image_info *spl_image, printf("Problem booting with BOOTP\n"); return rv; }
- return spl_parse_image_header(spl_image,
(struct image_header *)load_addr);
- if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&
image_get_magic(header) == FDT_MAGIC) {struct spl_load_info load;debug("Found FIT\n");load.bl_len = 1;load.read = spl_net_load_read;rv = spl_load_simple_fit(spl_image, &load, 0, header);- } else {
debug("Legacy image\n");rv = spl_parse_image_header(spl_image, header);- }
- return rv;
} #endif