On 2015-08-27 10:46, Paul Kocialkowski wrote:
The SYS_BOOT-based fallback shouldn't only check for one of the conditions of use and then let the switch/case handle each boot device without enforcing the conditions for each type of boot device again.
For instance, this behaviour would trigger the fallback for UART when BOOT_DEVICE_UART is defined, CONFIG_SPL_YMODEM_SUPPORT is enabled (which should be a show-stopper) and e.g. BOOT_DEVICE_USB is enabled and not CONFIG_SPL_USB_SUPPORT. Separating the logic for USB and UART solves this.
In addition, this adds support for more peripheral devices (USBETH and CPGMAC) to the fallback mechanism. Note that the USBETH boot device should always be different from the USB boot device (each should match a different bootrom handoff case).
Signed-off-by: Paul Kocialkowski contact@paulk.fr
Very well. Everything now works fine.
best regards, Hannes
Acked-by: Hannes Schmelzer oe5hpm@oevsv.at Tested-by: Hannes Schmelzer oe5hpm@oevsv.at