On 01/27/2014 11:15 PM, Piotr Wilczek wrote:
This patch enables to run Trats2 board on device tree.
Signed-off-by: Piotr Wilczek p.wilczek@samsung.com Signed-off-by: Kyungmin Park kyungmin.park@samsung.com CC: Minkyu Kang mk7.kang@samsung.com
board/samsung/dts/exynos4412-trats2.dts | 434 +++++++++++++++++++++++++++++++ board/samsung/trats2/trats2.c | 216 +-------------- include/configs/trats2.h | 199 ++------------ 3 files changed, 459 insertions(+), 390 deletions(-) create mode 100644 board/samsung/dts/exynos4412-trats2.dts
diff --git a/board/samsung/dts/exynos4412-trats2.dts b/board/samsung/dts/exynos4412-trats2.dts new file mode 100644 index 0000000..c8f847c --- /dev/null +++ b/board/samsung/dts/exynos4412-trats2.dts @@ -0,0 +1,434 @@ +/*
- Samsung's Exynos4412 based Trats2 board device tree source
- Copyright (c) 2014 Samsung Electronics Co., Ltd.
http://www.samsung.com
- SPDX-License-Identifier: GPL-2.0+
- */
+/dts-v1/; +/include/ "exynos4.dtsi"
+/ {
- model = "Samsung Trats2 based on Exynos4412";
- compatible = "samsung,trats2", "samsung,exynos4412";
- config {
samsung,dsim-device-name = "s6e8ax0";- };
- aliases {
i2c0 = "/i2c@13860000";i2c1 = "/i2c@13870000";i2c2 = "/i2c@13880000";i2c3 = "/i2c@13890000";i2c4 = "/i2c@138a0000";i2c5 = "/i2c@138b0000";i2c6 = "/i2c@138c0000";i2c7 = "/i2c@138d0000";serial0 = "/serial@13800000";console = "/serial@13820000";mmc0 = "sdhci@12510000";mmc2 = "sdhci@12510000";
mmc2 isn't 0x12510000.
- };
- i2c@138d0000 {
samsung,i2c-sda-delay = <100>;samsung,i2c-slave-addr = <0x10>;samsung,i2c-max-bus-freq = <100000>;status = "okay";max77686_pmic@09 {compatible = "maxim,max77686_pmic";interrupts = <7 0>;reg = <0x09 0 0>;#clock-cells = <1>;voltage-regulators {ldo1_reg: ldo1 {regulator-compatible = "LDO1";regulator-name = "VALIVE_1.0V_AP";regulator-min-microvolt = <1000000>;regulator-max-microvolt = <1000000>;regulator-always-on;regulator-mem-on;};ldo2_reg: ldo2 {regulator-compatible = "LDO2";regulator-name = "VM1M2_1.2V_AP";regulator-min-microvolt = <1200000>;regulator-max-microvolt = <1200000>;regulator-always-on;regulator-mem-on;};ldo3_reg: ldo3 {regulator-compatible = "LDO3";regulator-name = "VCC_1.8V_AP";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-always-on;regulator-mem-on;};ldo4_reg: ldo4 {regulator-compatible = "LDO4";regulator-name = "VCC_2.8V_AP";regulator-min-microvolt = <2800000>;regulator-max-microvolt = <2800000>;regulator-always-on;regulator-mem-on;};ldo5_reg: ldo5 {regulator-compatible = "LDO5";regulator-name = "VCC_1.8V_IO";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-always-on;regulator-mem-on;};ldo6_reg: ldo6 {regulator-compatible = "LDO6";regulator-name = "VMPLL_1.0V_AP";regulator-min-microvolt = <1000000>;regulator-max-microvolt = <1000000>;regulator-always-on;regulator-mem-on;};ldo7_reg: ldo7 {regulator-compatible = "LDO7";regulator-name = "VPLL_1.0V_AP";regulator-min-microvolt = <1000000>;regulator-max-microvolt = <1000000>;regulator-always-on;regulator-mem-on;};ldo8_reg: ldo8 {regulator-compatible = "LDO8";regulator-name = "VMIPI_1.0V";regulator-min-microvolt = <1000000>;regulator-max-microvolt = <1000000>;regulator-mem-off;};ldo9_reg: ldo9 {regulator-compatible = "LDO9";regulator-name = "CAM_ISP_MIPI_1.2V";regulator-min-microvolt = <1200000>;regulator-max-microvolt = <1200000>;regulator-mem-idle;};ldo10_reg: ldo10 {regulator-compatible = "LDO10";regulator-name = "VMIPI_1.8V";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-mem-off;};ldo11_reg: ldo11 {regulator-compatible = "LDO11";regulator-name = "VABB1_1.95V";regulator-min-microvolt = <1950000>;regulator-max-microvolt = <1950000>;regulator-always-on;regulator-mem-off;};ldo12_reg: ldo12 {regulator-compatible = "LDO12";regulator-name = "VUOTG_3.0V";regulator-min-microvolt = <3000000>;regulator-max-microvolt = <3000000>;regulator-mem-off;};ldo13_reg: ldo13 {regulator-compatible = "LDO13";regulator-name = "NFC_AVDD_1.8V";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-mem-idle;};ldo14_reg: ldo14 {regulator-compatible = "LDO14";regulator-name = "VABB2_1.95V";regulator-min-microvolt = <1950000>;regulator-max-microvolt = <1950000>;regulator-always-on;regulator-mem-off;};ldo15_reg: ldo15 {regulator-compatible = "LDO15";regulator-name = "VHSIC_1.0V";regulator-min-microvolt = <1000000>;regulator-max-microvolt = <1000000>;regulator-mem-off;};ldo16_reg: ldo16 {regulator-compatible = "LDO16";regulator-name = "VHSIC_1.8V";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-mem-off;};ldo17_reg: ldo17 {regulator-compatible = "LDO17";regulator-name = "CAM_SENSOR_CORE_1.2V";regulator-min-microvolt = <1200000>;regulator-max-microvolt = <1200000>;regulator-mem-idle;};ldo18_reg: ldo18 {regulator-compatible = "LDO18";regulator-name = "CAM_ISP_SEN_IO_1.8V";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-mem-idle;};ldo19_reg: ldo19 {regulator-compatible = "LDO19";regulator-name = "VT_CAM_1.8V";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-mem-idle;};ldo20_reg: ldo20 {regulator-compatible = "LDO20";regulator-name = "VDDQ_PRE_1.8V";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-mem-idle;};ldo21_reg: ldo21 {regulator-compatible = "LDO21";regulator-name = "VTF_2.8V";regulator-min-microvolt = <2800000>;regulator-max-microvolt = <2800000>;regulator-mem-idle;};ldo22_reg: ldo22 {regulator-compatible = "LDO22";regulator-name = "VMEM_VDD_2.8V";regulator-min-microvolt = <2800000>;regulator-max-microvolt = <2800000>;regulator-always-on;regulator-mem-off;};ldo23_reg: ldo23 {regulator-compatible = "LDO23";regulator-name = "TSP_AVDD_3.3V";regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;regulator-mem-idle;};ldo24_reg: ldo24 {regulator-compatible = "LDO24";regulator-name = "TSP_VDD_1.8V";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-mem-idle;};ldo25_reg: ldo25 {regulator-compatible = "LDO25";regulator-name = "LCD_VCC_3.3V";regulator-min-microvolt = <2800000>;regulator-max-microvolt = <2800000>;regulator-mem-idle;};ldo26_reg: ldo26 {regulator-compatible = "LDO26";regulator-name = "MOTOR_VCC_3.0V";regulator-min-microvolt = <3000000>;regulator-max-microvolt = <3000000>;regulator-mem-idle;};buck1_reg: buck1 {regulator-compatible = "BUCK1";regulator-name = "vdd_mif";regulator-min-microvolt = <850000>;regulator-max-microvolt = <1100000>;regulator-always-on;regulator-boot-on;regulator-mem-off;};buck2_reg: buck2 {regulator-compatible = "BUCK2";regulator-name = "vdd_arm";regulator-min-microvolt = <850000>;regulator-max-microvolt = <1500000>;regulator-always-on;regulator-boot-on;regulator-mem-off;};buck3_reg: buck3 {regulator-compatible = "BUCK3";regulator-name = "vdd_int";regulator-min-microvolt = <850000>;regulator-max-microvolt = <1150000>;regulator-always-on;regulator-boot-on;regulator-mem-off;};buck4_reg: buck4 {regulator-compatible = "BUCK4";regulator-name = "vdd_g3d";regulator-min-microvolt = <850000>;regulator-max-microvolt = <1150000>;regulator-boot-on;regulator-mem-off;};buck5_reg: buck5 {regulator-compatible = "BUCK5";regulator-name = "VMEM_1.2V_AP";regulator-min-microvolt = <1200000>;regulator-max-microvolt = <1200000>;regulator-always-on;};buck6_reg: buck6 {regulator-compatible = "BUCK6";regulator-name = "VCC_SUB_1.35V";regulator-min-microvolt = <1350000>;regulator-max-microvolt = <1350000>;regulator-always-on;};buck7_reg: buck7 {regulator-compatible = "BUCK7";regulator-name = "VCC_SUB_2.0V";regulator-min-microvolt = <2000000>;regulator-max-microvolt = <2000000>;regulator-always-on;};buck8_reg: buck8 {regulator-compatible = "BUCK8";regulator-name = "VMEM_VDDF_3.0V";regulator-min-microvolt = <2850000>;regulator-max-microvolt = <2850000>;regulator-always-on;regulator-mem-off;};buck9_reg: buck9 {regulator-compatible = "BUCK9";regulator-name = "CAM_ISP_CORE_1.2V";regulator-min-microvolt = <1000000>;regulator-max-microvolt = <1200000>;regulator-mem-off;};};};- };
- fimd@11c00000 {
compatible = "samsung,exynos-fimd";reg = <0x11c00000 0xa4>;samsung,vl-freq = <60>;samsung,vl-col = <720>;samsung,vl-row = <1280>;samsung,vl-width = <720>;samsung,vl-height = <1280>;samsung,vl-clkp = <0>;samsung,vl-oep = <0>;samsung,vl-hsp = <1>;samsung,vl-vsp = <1>;samsung,vl-dp = <1>;samsung,vl-bpix = <4>;samsung,vl-hspw = <5>;samsung,vl-hbpd = <10>;samsung,vl-hfpd = <10>;samsung,vl-vspw = <2>;samsung,vl-vbpd = <1>;samsung,vl-vfpd = <13>;samsung,vl-cmd-allow-len = <0xf>;samsung,winid = <0>;samsung,power-on-delay = <30>;samsung,interface-mode = <1>;samsung,mipi-enabled = <1>;samsung,dp-enabled;samsung,dual-lcd-enabled;samsung,logo-on = <1>;samsung,resolution = <0>;samsung,rgb-mode = <0>;- };
- mipidsi@11c80000 {
compatible = "samsung,exynos-mipi-dsi";reg = <0x11c80000 0x5c>;samsung,dsim-config-e_interface = <1>;samsung,dsim-config-e_virtual_ch = <0>;samsung,dsim-config-e_pixel_format = <7>;samsung,dsim-config-e_burst_mode = <1>;samsung,dsim-config-e_no_data_lane = <3>;samsung,dsim-config-e_byte_clk = <0>;samsung,dsim-config-hfp = <1>;samsung,dsim-config-p = <3>;samsung,dsim-config-m = <120>;samsung,dsim-config-s = <1>;samsung,dsim-config-pll_stable_time = <500>;samsung,dsim-config-esc_clk = <20000000>;samsung,dsim-config-stop_holding_cnt = <0x7ff>;samsung,dsim-config-bta_timeout = <0xff>;samsung,dsim-config-rx_timeout = <0xffff>;samsung,dsim-device-id = <0xffffffff>;samsung,dsim-device-bus_id = <0>;samsung,dsim-device-reverse_panel = <1>;- };
- sdhci@12510000 {
samsung,bus-width = <8>;samsung,timing = <1 3 3>;pwr-gpios = <&gpio 0x2004002 0>;- };
- sdhci@12520000 {
status = "disabled";- };
- sdhci@12530000 {
samsung,bus-width = <4>;samsung,timing = <1 2 3>;cd-gpios = <&gpio 0x20C6004 0>;- };
- sdhci@12540000 {
status = "disabled";- };
+}; diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c index c17c24d..108d0f8 100644 --- a/board/samsung/trats2/trats2.c +++ b/board/samsung/trats2/trats2.c @@ -8,13 +8,6 @@
#include <common.h> #include <lcd.h> -#include <asm/io.h> -#include <asm/arch/gpio.h> -#include <asm/arch/mmc.h> -#include <asm/arch/power.h> -#include <asm/arch/clk.h> -#include <asm/arch/clock.h> -#include <asm/arch/mipi_dsim.h> #include <asm/arch/pinmux.h> #include <asm/arch/power.h> #include <power/pmic.h> @@ -23,7 +16,6 @@ #include <power/max77693_pmic.h> #include <power/max77693_muic.h> #include <power/max77693_fg.h> -#include <libtizen.h> #include <errno.h> #include <usb.h> #include <usb/s3c_udc.h> @@ -69,16 +61,6 @@ static void check_hw_revision(void) board_rev = modelrev << 8; }
-#ifdef CONFIG_DISPLAY_BOARDINFO -int checkboard(void) -{
- puts("Board:\tTRATS2\n");
- printf("HW Revision:\t0x%04x\n", board_rev);
- return 0;
-} -#endif
u32 get_board_rev(void) { return board_rev; @@ -158,26 +140,21 @@ int get_soft_i2c_sda_pin(void)
int board_early_init_f(void) {
check_hw_revision(); board_external_gpio_init();
gd->flags |= GD_FLG_DISABLE_CONSOLE;
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
- board_i2c_init(gd->fdt_blob);
+#endif
return 0; }
static int pmic_init_max77686(void);
-int board_init(void) +int exynos_init(void) {
- struct exynos4_power *pwr =
(struct exynos4_power *)samsung_get_base_power();- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
- /* workaround: clear INFORM4..5 */
- writel(0, (unsigned int)&pwr->inform4);
- writel(0, (unsigned int)&pwr->inform5);
check_hw_revision();
printf("HW Revision:\t0x%04x\n", board_rev);
return 0;
} @@ -248,90 +225,6 @@ int power_init_board(void) return 0; }
-int dram_init(void) -{
- u32 size_mb;
- size_mb = (get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE) +get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE) +get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE)) >> 20;- gd->ram_size = size_mb << 20;
- return 0;
-}
-void dram_init_banksize(void) -{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
- gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
- gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
- gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
- gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-}
-int board_mmc_init(bd_t *bis) -{
- int err0, err2 = 0;
- gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
- /* eMMC_EN: SD_0_CDn: GPK0[2] Output High */
- s5p_gpio_direction_output(&gpio2->k0, 2, 1);
- s5p_gpio_set_pull(&gpio2->k0, 2, GPIO_PULL_NONE);
- /*
* eMMC GPIO:* SDR 8-bit@48MHz at MMC0* GPK0[0] SD_0_CLK(2)* GPK0[1] SD_0_CMD(2)* GPK0[2] SD_0_CDn -> Not used* GPK0[3:6] SD_0_DATA[0:3](2)* GPK1[3:6] SD_0_DATA[0:3](3)** DDR 4-bit@26MHz at MMC4* GPK0[0] SD_4_CLK(3)* GPK0[1] SD_4_CMD(3)* GPK0[2] SD_4_CDn -> Not used* GPK0[3:6] SD_4_DATA[0:3](3)* GPK1[3:6] SD_4_DATA[4:7](4)*/- err0 = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
- /*
* MMC device init* mmc0 : eMMC (8-bit buswidth)* mmc2 : SD card (4-bit buswidth)*/- if (err0)
debug("SDMMC0 not configured\n");- else
err0 = s5p_mmc_init(0, 8);- /* T-flash detect */
- s5p_gpio_cfg_pin(&gpio2->x3, 4, 0xf);
- s5p_gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP);
- /*
* Check the T-flash detect pin* GPX3[4] T-flash detect pin*/- if (!s5p_gpio_get_value(&gpio2->x3, 4)) {
err2 = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);if (err2)debug("SDMMC2 not configured\n");elseerr2 = s5p_mmc_init(2, 4);- }
- return err0 & err2;
-}
#ifdef CONFIG_USB_GADGET static int s5pc210_phy_control(int on) { @@ -479,46 +372,7 @@ static int pmic_init_max77686(void) */
#ifdef CONFIG_LCD -static struct mipi_dsim_config dsim_config = {
- .e_interface = DSIM_VIDEO,
- .e_virtual_ch = DSIM_VIRTUAL_CH_0,
- .e_pixel_format = DSIM_24BPP_888,
- .e_burst_mode = DSIM_BURST_SYNC_EVENT,
- .e_no_data_lane = DSIM_DATA_LANE_4,
- .e_byte_clk = DSIM_PLL_OUT_DIV8,
- .hfp = 1,
- .p = 3,
- .m = 120,
- .s = 1,
- /* D-PHY PLL stable time spec :min = 200usec ~ max 400usec */
- .pll_stable_time = 500,
- /* escape clk : 10MHz */
- .esc_clk = 20 * 1000000,
- /* stop state holding counter after bta change count 0 ~ 0xfff */
- .stop_holding_cnt = 0x7ff,
- /* bta timeout 0 ~ 0xff */
- .bta_timeout = 0xff,
- /* lp rx timeout 0 ~ 0xffff */
- .rx_timeout = 0xffff,
-};
-static struct exynos_platform_mipi_dsim dsim_platform_data = {
- .lcd_panel_info = NULL,
- .dsim_config = &dsim_config,
-};
-static struct mipi_dsim_lcd_device mipi_lcd_device = {
- .name = "s6e8ax0",
- .id = -1,
- .bus_id = 0,
- .platform_data = (void *)&dsim_platform_data,
-};
-static int mipi_power(void) +int mipi_power(void) { struct pmic *p = pmic_get("MAX77686_PMIC");
@@ -555,62 +409,6 @@ void exynos_reset_lcd(void) udelay(10); s5p_gpio_set_value(&gpio1->f2, 1, 1); }
-vidinfo_t panel_info = {
- .vl_freq = 60,
- .vl_col = 720,
- .vl_row = 1280,
- .vl_width = 720,
- .vl_height = 1280,
- .vl_clkp = CONFIG_SYS_HIGH,
- .vl_hsp = CONFIG_SYS_LOW,
- .vl_vsp = CONFIG_SYS_LOW,
- .vl_dp = CONFIG_SYS_LOW,
- .vl_bpix = 4, /* Bits per pixel, 2^4 = 16 */
- /* s6e8ax0 Panel infomation */
- .vl_hspw = 5,
- .vl_hbpd = 10,
- .vl_hfpd = 10,
- .vl_vspw = 2,
- .vl_vbpd = 1,
- .vl_vfpd = 13,
- .vl_cmd_allow_len = 0xf,
- .mipi_enabled = 1,
- .dual_lcd_enabled = 0,
- .init_delay = 0,
- .power_on_delay = 25,
- .reset_delay = 0,
- .interface_mode = FIMD_RGB_INTERFACE,
-};
-void init_panel_info(vidinfo_t *vid) -{
- vid->logo_on = 1;
- vid->resolution = HD_RESOLUTION;
- vid->rgb_mode = MODE_RGB_P;
- vid->power_on_delay = 30;
- mipi_lcd_device.reverse_panel = 1;
-#ifdef CONFIG_TIZEN
- get_tizen_logo_info(vid);
-#endif
- strcpy(dsim_platform_data.lcd_panel_name, mipi_lcd_device.name);
- dsim_platform_data.mipi_power = mipi_power;
- dsim_platform_data.phy_enable = set_mipi_phy_ctrl;
- dsim_platform_data.lcd_panel_info = (void *)vid;
- exynos_mipi_dsi_register_lcd_device(&mipi_lcd_device);
- s6e8ax0_init();
- exynos_set_dsim_platform_data(&dsim_platform_data);
-} #endif /* LCD */
#ifdef CONFIG_MISC_INIT_R diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 28270fe..0ac885a 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -8,147 +8,32 @@
- SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef __CONFIG_H -#define __CONFIG_H +#ifndef __CONFIG_TRATS2_H +#define __CONFIG_TRATS2_H
-/*
- High Level Configuration Options
- (easy to change)
- */
-#define CONFIG_SAMSUNG /* in a SAMSUNG core */ -#define CONFIG_S5P /* which is in a S5P Family */ -#define CONFIG_EXYNOS4 /* which is in a EXYNOS4XXX */ -#define CONFIG_TIZEN /* TIZEN lib */
-#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <configs/exynos4-dt.h>
-#define CONFIG_ARCH_CPU_INIT -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_SYS_PROMPT "Trats2 # " /* Monitor Command Prompt */
-#ifndef CONFIG_SYS_L2CACHE_OFF -#define CONFIG_SYS_L2_PL310 -#define CONFIG_SYS_PL310_BASE 0x10502000 -#endif +#undef CONFIG_DEFAULT_DEVICE_TREE +#define CONFIG_DEFAULT_DEVICE_TREE exynos4412-trats2
-#define CONFIG_NR_DRAM_BANKS 4 -#define PHYS_SDRAM_1 0x40000000 /* LDDDR2 DMC 0 */ -#define PHYS_SDRAM_1_SIZE (256 << 20) /* 256 MB in CS 0 */ -#define PHYS_SDRAM_2 0x50000000 /* LPDDR2 DMC 1 */ -#define PHYS_SDRAM_2_SIZE (256 << 20) /* 256 MB in CS 0 */ -#define PHYS_SDRAM_3 0x60000000 /* LPDDR2 DMC 1 */ -#define PHYS_SDRAM_3_SIZE (256 << 20) /* 256 MB in CS 0 */ -#define PHYS_SDRAM_4 0x70000000 /* LPDDR2 DMC 1 */ -#define PHYS_SDRAM_4_SIZE (256 << 20) /* 256 MB in CS 0 */ -#define PHYS_SDRAM_END 0x80000000 +/* TRATS2 has 4 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 4 +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
-#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) #define CONFIG_SYS_TEXT_BASE 0x78100000
-#define CONFIG_SYS_CLK_FREQ 24000000
-#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_REVISION_TAG
-/* MACH_TYPE_TRATS2 */ -#define MACH_TYPE_TRATS2 3765 -#define CONFIG_MACH_TYPE MACH_TYPE_TRATS2
-#define CONFIG_DISPLAY_CPUINFO
-#include <asm/sizes.h> -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))
-/* select serial console configuration */ -#define CONFIG_SERIAL2
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_BAUDRATE 115200
-/* It should define before config_cmd_default.h */ -#define CONFIG_SYS_NO_FLASH
-/***********************************************************
- Command definition
- ***********************************************************/
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_ECHO -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_MISC -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_SOURCE -#undef CONFIG_CMD_XIMG -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MMC -#define CONFIG_CMD_DFU -#define CONFIG_CMD_GPT -#define CONFIG_CMD_PMIC
-#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_CMD_FAT -#define CONFIG_FAT_WRITE
-/* EXT4 */ -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_EXT4_WRITE
-/* USB Composite download gadget - g_dnl */ -#define CONFIG_USBDOWNLOAD_GADGET -#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M -#define CONFIG_DFU_FUNCTION -#define CONFIG_DFU_MMC
-/* TIZEN THOR downloader support */ -#define CONFIG_CMD_THOR_DOWNLOAD -#define CONFIG_THOR_FUNCTION
-/* USB Samsung's IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x04E8 -#define CONFIG_G_DNL_PRODUCT_NUM 0x6601 -#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM -#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D -#define CONFIG_G_DNL_MANUFACTURER "Samsung"
-/* To use the TFTPBOOT over USB, Please enable the CONFIG_CMD_NET */ -#undef CONFIG_CMD_NET
-/* MMC */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_S5P_SDHCI -#define CONFIG_SDHCI -#define CONFIG_MMC_SDMA -#define CONFIG_MMC_DEFAULT_DEV 0
-/* PWM */ -#define CONFIG_PWM
-#define CONFIG_BOOTARGS "Please use defined boot" -#define CONFIG_BOOTCOMMAND "run mmcboot" -#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" +#define CONFIG_BOOTARGS "Please use defined boot" +#define CONFIG_BOOTCOMMAND "run mmcboot"
#define CONFIG_ENV_OVERWRITE -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG @@ -240,46 +125,6 @@ "setenv spl_addr_tmp;\0" \ "fdtaddr=40800000\0" \
-/*
- Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "Trats2 # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
-/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- GENERATED_GBL_DATA_SIZE)-/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-/*-----------------------------------------------------------------------
- FLASH and environment organization
- */
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
-#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV -#define CONFIG_ENV_SIZE 4096 -#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */ -#define CONFIG_EFI_PARTITION -#define CONFIG_PARTITION_UUIDS
-#define CONFIG_BOARD_EARLY_INIT_F
/* I2C */ #include <asm/arch/gpio.h>
@@ -312,11 +157,6 @@ int get_soft_i2c_sda_pin(void); #define CONFIG_POWER_MUIC_MAX77693 #define CONFIG_POWER_FG_MAX77693 #define CONFIG_POWER_BATTERY_TRATS2 -#define CONFIG_USB_GADGET -#define CONFIG_USB_GADGET_S3C_UDC_OTG -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 -#define CONFIG_USB_CABLE_CHECK
/* Common misc for Samsung */ #define CONFIG_MISC_COMMON @@ -356,10 +196,7 @@ int get_soft_i2c_sda_pin(void); #define CONFIG_VIDEO_BMP_GZIP #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
-#define CONFIG_CMD_USB_MASS_STORAGE -#define CONFIG_USB_GADGET_MASS_STORAGE
-/* Pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 +#define LCD_XRES 720 +#define LCD_YRES 1280
#endif /* __CONFIG_H */