Hello Stephen,
On Tue, 24 Feb 2015 09:51:56 -0700, Stephen Warren swarren@wwwdotorg.org wrote:
On 02/24/2015 01:48 AM, Albert ARIBAUD wrote:
Hello,
Can anyone confirm that on current u-boot/master, rpi_2 build fine with
git clean -xfd; make rpi_2_defconfig; make
but fails with
tools/buildman/buildman rpi_2
with the following error:
arm: + rpi_2+make[3]: *** No rule to make target 'arch/arm/cpu/armv7/bcm2835/../../arm1176/bcm2835//init.o', needed by 'arch/arm/cpu/armv7/bcm2835/built-in.o'. Stop. +make[2]: *** [arch/arm/cpu/armv7/bcm2835] Error 2 +make[1]: *** [arch/arm/cpu/armv7] Error 2 +make: *** [sub-make] Error 2
My gut feeling is that the problem lies with the fact that arch/arm/cpu/armv7/bcm2835/ contains a Makefile which refers to init.o, reset.o, timer.o and mbox.o but the source code for these resides in another directory, arch/arm/cpu/arm1176/bcm2835/.
CC:ing Stephen as directory arch/arm/cpu/armv7/bcm2835/ was introduced by his commit db75356f (committed by Tom, also cc:) and Simon, since the issue is related to buildman.
This problem exists with quite a few boards, including the rpi port before the addition of rpi_2 support. It's a bit intermittent which may be why you didn't notice before.
See the following, and replies: http://lists.denx.de/pipermail/u-boot/2015-February/205255.html
Thanks. Indeed it hadn't bitten me so far.
Amicalement,