Re: [U-Boot-Users] Loads function and flow control.

In message D96E2AFA0DF3D211B139009027454948037362A2@helios.gnv.tcc.thomson-csf.com you wrote:

I have just installed the great rpm uucp to use cu.

so I make cu -s 9600 -l ttyS1 --nostop.

Unfortunately, it seems that what I type isn't sent to my board !! It works fine with minicom. It seems that it is because of the flow control.

You must configure the tool not to use flow control.

All this is documented in detail in http://www.denx.de/re/DPLG.html

Best regards,

Wolfgang Denk