Add a DM driver for the TI LP5562 4 channel LED controller. Supports
independent on/off control of all 4 channels (blue/green/red/white).
Supports LED_BLINK on blue/green/red channels. White channel supports
LED_BLINK, but the blink period is shared with the blue channel due
to controller limitations.
Doug Zobel (1):
dm: led: add TI LP5562 LED driver
doc/device-tree-bindings/leds/leds-lp5562.txt | 61 +++
drivers/led/Kconfig | 8 +
drivers/led/Makefile | 1 +
drivers/led/led_lp5562.c | 571 ++++++++++++++++++++++++++
4 files changed, 641 insertions(+)
create mode 100644 doc/device-tree-bindings/leds/leds-lp5562.txt
create mode 100644 drivers/led/led_lp5562.c
--
2.7.4
--
This email and any attachments are for the exclusive use of the
intended recipient(s) and may contain confidential and/or privileged
information. Inadvertent disclosure of this message does not constitute a
waiver of any privilege, right or remedy. If you are not the intended
recipient, please do not directly or indirectly use, disclose or distribute
this message, and please contact the sender and delete this email, any
attachments and all copies. Climate and its affiliates may use, read or
archive email communications (including attachments) through its computer
network, as permitted by applicable law. Climate and its affiliates (or an
external service provider) may also scan emails and attachments on its
computer network to ensure systems operate efficiently and to minimize
security risks. Thank you.
