Re: [PATCH v2 01/10] net: tsec: add support for promiscuous mode

On Sat, Oct 16, 2021 at 9:30 PM Ramon Fried rfried.dev@gmail.com wrote:

On Wed, Sep 29, 2021 at 6:05 PM Vladimir Oltean vladimir.oltean@nxp.com wrote:

...

The Freescale TSEC can be a DSA master, and the ports of the attached DSA switch can have different MAC addresses compared to the TSEC. Nonetheless, the TSEC must receive the packets on behalf of those switch ports. Therefore, implement the promiscuous mode method to allow DSA to set this.

Note that the init_registers() function called from eth_ops :: start overwrites this setting. There is no reason why the RCTRL register should be zero-initialized, so just stop clearing it so that the setting we applied in eth_ops :: set_promisc sticks.

Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com Reviewed-by: Ramon Fried rfried.dev@gmail.com Reviewed-by: Bin Meng bmeng.cn@gmail.com

---

v1->v2: none

drivers/net/tsec.c | 20 ++++++++++++++++---- include/tsec.h | 2 ++ 2 files changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 0ce97656715f..4354753cab9c 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -156,6 +156,19 @@ static int tsec_mcast_addr(struct udevice *dev, const u8 *mcast_mac, int join) return 0; }

+static int tsec_set_promisc(struct udevice *dev, bool enable) +{

•   struct tsec_private *priv = dev_get_priv(dev);
  

•   struct tsec __iomem *regs = priv->regs;
  

•   if (enable)
  

•           setbits_be32(&regs->rctrl, RCTRL_PROM);
  

•   else
  

•           clrbits_be32(&regs->rctrl, RCTRL_PROM);
  

•   return 0;
  

+}

/*

• Initialized required registers to appropriate values, zeroing
• those we don't care about (unless zero is bad, in which case,

@@ -186,8 +199,6 @@ static void init_registers(struct tsec __iomem *regs) out_be32(&regs->hash.gaddr6, 0); out_be32(&regs->hash.gaddr7, 0);

•   out_be32(&regs->rctrl, 0x00000000);
  

•   /* Init RMON mib registers */
    memset((void *)&regs->rmon, 0, sizeof(regs->rmon));
  
  

@@ -454,7 +465,7 @@ void redundant_init(struct tsec_private *priv) 0x71, 0x72};

    /* Enable promiscuous mode */

•   setbits_be32(&regs->rctrl, 0x8);
  

•   setbits_be32(&regs->rctrl, RCTRL_PROM);
    /* Enable loopback mode */
    setbits_be32(&regs->maccfg1, MACCFG1_LOOPBACK);
    /* Enable transmit and receive */
  

@@ -506,7 +517,7 @@ void redundant_init(struct tsec_private *priv) if (fail) panic("eTSEC init fail!\n"); /* Disable promiscuous mode */

•   clrbits_be32(&regs->rctrl, 0x8);
  

•   clrbits_be32(&regs->rctrl, RCTRL_PROM);
    /* Disable loopback mode */
    clrbits_be32(&regs->maccfg1, MACCFG1_LOOPBACK);
  

} @@ -932,6 +943,7 @@ static const struct eth_ops tsec_ops = { .free_pkt = tsec_free_pkt, .stop = tsec_halt, .mcast = tsec_mcast_addr,

•   .set_promisc = tsec_set_promisc,
  

};

static struct tsec_data etsec2_data = { diff --git a/include/tsec.h b/include/tsec.h index 5433cfd96610..044ee35a91bd 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -122,6 +122,8 @@ #define ECNTRL_REDUCED_MII_MODE 0x00000004 #define ECNTRL_SGMII_MODE 0x00000002

+#define RCTRL_PROM 0x00000008

#ifndef CONFIG_SYS_TBIPA_VALUE # define CONFIG_SYS_TBIPA_VALUE 0x1f

#endif

2.25.1

Reviewed-by: Ramon Fried rfried.dev@gmail.com

Series applied to u-boot-net/next Thanks, Ramon.