Hi Adam,
On Wed, Mar 22, 2017 at 7:07 PM, Adam Ford aford173@gmail.com wrote: config SYS_SOC
@@ -415,5 +422,6 @@ source "board/udoo/Kconfig" source "board/udoo/neo/Kconfig" source "board/wandboard/Kconfig" source "board/warp/Kconfig" +source "board/logicpd/imx6/Kconfig"
Alphabetical order, please.
--- /dev/null +++ b/board/logicpd/imx6/README @@ -0,0 +1,103 @@ +How to use and build U-Boot on mx6sabresd: +----------------------------------
+Currently there are three methods for booting mx6sabresd boards:
Looks like you forgot to change the board name here :-)
+iomux_v3_cfg_t const nand_pads[] = {
static
+//Control: +DATA 4 0x020e057c 0x00000030 // IOMUXC_SW_PAD_CTL_PAD_DRAM_RESET +DATA 4 0x020e058c 0x00000000 // IOMUXC_SW_PAD_CTL_PAD_DRAM_SDBA2 - DSE can be configured using Group Control Register: IOMUXC_SW_PAD_CTL_GRP_CTLDS +DATA 4 0x020e059c 0x00000030 // IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT0 +DATA 4 0x020e05a0 0x00000030 // IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT1 +DATA 4 0x020e078c 0x00000030 // IOMUXC_SW_PAD_CTL_GRP_CTLDS
+//Data Strobes:
Better avoid // notation. You could use /* comment */ instead. Make sure you run checkpatch.pl.
+DATA 4 0x020e0750 0x00020000 // IOMUXC_SW_PAD_CTL_GRP_DDRMODE_CTL +DATA 4 0x020e05a8 0x00000030 // IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 +DATA 4 0x020e05b0 0x00000030 // IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 +DATA 4 0x020e0524 0x00000030 // IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 +DATA 4 0x020e051c 0x00000030 // IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 +//DATA 4 0x020e0518 0x00000030 // IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS4 +//DATA 4 0x020e050c 0x00000030 // IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS5 +//DATA 4 0x020e05b8 0x00000030 // IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS6 +//DATA 4 0x020e05c0 0x00000030 // IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS7
Better to remove unused lines.