On 23.07.15 15:43, Mugunthan V N wrote:
On Thursday 23 July 2015 04:46 PM, Ivan Khoronzhuk wrote:
Hi, Mugunthan
You are right, phy mode is a board property. But just for clarifying, does Ethernet SS, which contains SGMII on board, support another i/f mode except SGMII? Can it work w/o SerDes?
There is a upcoming SoC (K2E) using the same IP with RGMII phy connected. So the IP is capable of supporting multiple phy modes.
Regards Mugunthan V N
Then I would ask you to add it in commit message. Also, if it can work in RGMII mode, could you please check if a following errata doesn't affect you configuration. This is only for Marvell phys, and if it's your case, it be good, probably, to extend it`s impact on RGMII mode also.
net: phy: marvell: add errata w/a for 88E151* chips 35fa0dda0ccee8075b1ef8922e930d5dcdea9f5e