Hi,
On 17.11.2015 11:17, Hoefle Marco wrote:
Hello Michal, hello Jagan, for me the Microblaze SPI port in mainline u-boot does not work with DM. I used Michal's files and modified the addresses and changed Full Ethernet to Ethernet lite and uart to uartlite to match the hardware here. This was not a big step as both Hardware configurations are very similar. The changes between v2016.01-rc1 and the changed/added files are attached as patch.
Still the same error: U-Boot 2016.01--95f642905f8dd7c07ac9f5ed49fe14291ab1fb15---00002-g95f6429-dirty (Nov 17 2015 - 10:57:55 +0100)
DRAM: 256 MiB Invalid bus 0 (err=-19) *** Warning - spi_flash_probe() failed, using default environment
is this u-boot with my DTB or yours? It is not visible if this is dtb which you use in your config. Definitely check that dtb you use setup aliases.
Thanks, Michal