The LMB memory map is now being handled through data structures which need heap memory to be operational. Moreover, the LMB memory map is initialised as part of the board boot after relocation as part of platform agnostic code. Remove addition of LMB memory before relocation for the stm32mp platforms.
Signed-off-by: Sughosh Ganu sughosh.ganu@linaro.org --- Changes since rfc: New patch
arch/arm/mach-stm32mp/dram_init.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-stm32mp/dram_init.c b/arch/arm/mach-stm32mp/dram_init.c index 97d894d05f..32f2a95ed8 100644 --- a/arch/arm/mach-stm32mp/dram_init.c +++ b/arch/arm/mach-stm32mp/dram_init.c @@ -57,15 +57,8 @@ phys_addr_t board_get_usable_ram_top(phys_size_t total_size) */ gd->ram_top = clamp_val(gd->ram_top, 0, SZ_4G - 1);
- /* found enough not-reserved memory to relocated U-Boot */ - lmb_add(gd->ram_base, gd->ram_top - gd->ram_base, LMB_NONE); - boot_fdt_add_mem_rsv_regions((void *)gd->fdt_blob); - /* add 8M for reserved memory for display, fdt, gd,... */ - size = ALIGN(SZ_8M + CONFIG_SYS_MALLOC_LEN + total_size, MMU_SECTION_SIZE), - reg = lmb_alloc(size, MMU_SECTION_SIZE, LMB_NONE); - - if (!reg) - reg = gd->ram_top - size; + size = ALIGN(SZ_8M + CONFIG_SYS_MALLOC_LEN + total_size, MMU_SECTION_SIZE); + reg = gd->ram_top - size;
/* before relocation, mark the U-Boot memory as cacheable by default */ if (!(gd->flags & GD_FLG_RELOC))