Hi Alain
On 9/9/22 18:06, Alain Volmat wrote:
Functions stm32_i2c_message_start and stm32_i2c_handle_reload both get a stop boolean indicating if the transfer should end with a STOP or not. However no specific handling is needed in those functions hence remove the parameter.
Signed-off-by: Alain Volmat alain.volmat@foss.st.com Reviewed-by: Patrick Delaunay patrick.delaunay@foss.st.com
drivers/i2c/stm32f7_i2c.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/stm32f7_i2c.c b/drivers/i2c/stm32f7_i2c.c index 78d7156492..0ec67b5c12 100644 --- a/drivers/i2c/stm32f7_i2c.c +++ b/drivers/i2c/stm32f7_i2c.c @@ -282,7 +282,7 @@ static int stm32_i2c_check_device_busy(struct stm32_i2c_priv *i2c_priv) }
static void stm32_i2c_message_start(struct stm32_i2c_priv *i2c_priv,
struct i2c_msg *msg, bool stop)
struct i2c_msg *msg){ struct stm32_i2c_regs *regs = i2c_priv->regs; u32 cr2 = readl(®s->cr2); @@ -325,7 +325,7 @@ static void stm32_i2c_message_start(struct stm32_i2c_priv *i2c_priv, */
static void stm32_i2c_handle_reload(struct stm32_i2c_priv *i2c_priv,
struct i2c_msg *msg, bool stop)
struct i2c_msg *msg){ struct stm32_i2c_regs *regs = i2c_priv->regs; u32 cr2 = readl(®s->cr2); @@ -431,7 +431,7 @@ static int stm32_i2c_message_xfer(struct stm32_i2c_priv *i2c_priv, /* Add errors */ mask |= STM32_I2C_ISR_ERRORS;
- stm32_i2c_message_start(i2c_priv, msg, stop);
stm32_i2c_message_start(i2c_priv, msg);
while (msg->len) { /*
@@ -469,7 +469,7 @@ static int stm32_i2c_message_xfer(struct stm32_i2c_priv *i2c_priv, mask = msg->flags & I2C_M_RD ? STM32_I2C_ISR_RXNE : STM32_I2C_ISR_TXIS | STM32_I2C_ISR_NACKF;
stm32_i2c_handle_reload(i2c_priv, msg, stop);
stm32_i2c_handle_reload(i2c_priv, msg);
Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com
Thanks Patrice