This series remove the usage of the DM_I2C_COMPAT option for all the ti platforms. It also takes this opportunity to not disable DM_I2C in the SPL.
There are a couples of issues to fix: - CMD_EEPROM does not support the DM API. Fixed by removing this option when DM_I2C is used without DM_I2C_COMPAT - i2c_get_chip_for_busnum() does not work when OF_CONTROL is not used (as is the case with am33xx SPL). - The I2C driver do not support DM_I2C without OF_CONTROL. - Most of the PMIC drivers do not support the I2C DM API. - Board detection is done prior DM initialization. Fixed by moving it after DM is initialized. That move breaks the DRA7 platforms (The fixes for that are at the last 5 patches this series)
When all this is taken care of DM_I2C_COMPAT can be removed and DM_I2C enabled in the SPL.
This has been tested with the following boards: - am437x SK - am335x SK - am335x beaglebone (both DM and non-DM config) - dra76 evm - am572 evm - k2g evm
Andreas Dannenberg (1): ti: common: board_detect: Allow DM I2C without CONFIG_DM_I2C_COMPAT
Jean-Jacques Hiblot (17): cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT dm: i2c: Add dm_i2c_probe_device() to test the presence of a chip dm: device: Allow using uclass_find_device_by_seq() without OF_CONTROL configs: am335x: am57x: dra7x: Enable CONFIG_SPL_DM_SEQ_ALIAS i2c: omap24xx_i2c: Use platdata to probe the device am335x: Register the I2C controllers if DM_I2C is used. dts: am43x: omap5: Add node for I2C in SPL omap: detect the board after DM is available power: make most tps drivers and the twl4030 driver compatible with DM_I2C configs: am335x_pdu001: Explicitly enable CONFIG_I2C_COMPAT ti: remove usage of DM_I2C_COMPAT and don't disable DM_I2C in SPL am57xx: remove non-DM I2C code configs: dra7xx-evm: increase the size of the malloc's pool before relocation lib: fdtdec: Add function re-setup the fdt more effeciently drivers: core: Add the option SPL_DM_DEVICE_REMOVE to the Kconfig drivers: core: nullify gd->dm_root after dm_uninit() dra7: Allow selecting a new dtb after board detection.
Vignesh R (1): i2c: omap24xx_i2c: Move away from SoC specific headers for reg offset
arch/arm/dts/am437x-gp-evm-u-boot.dtsi | 4 + arch/arm/dts/omap5-u-boot.dtsi | 4 + arch/arm/include/asm/arch-am33xx/i2c.h | 47 +-- arch/arm/include/asm/arch-omap3/i2c.h | 47 --- arch/arm/include/asm/arch-omap4/i2c.h | 45 --- arch/arm/include/asm/arch-omap5/i2c.h | 45 --- arch/arm/include/asm/omap_i2c.h | 24 ++ arch/arm/mach-keystone/ddr3_spd.c | 7 + arch/arm/mach-omap2/am33xx/board.c | 24 +- arch/arm/mach-omap2/am33xx/clk_synthesizer.c | 56 +++- arch/arm/mach-omap2/clocks-common.c | 2 + arch/arm/mach-omap2/hwinit-common.c | 23 +- board/ti/am335x/board.c | 17 +- board/ti/am335x/mux.c | 14 + board/ti/am43xx/board.c | 35 +- board/ti/am57xx/board.c | 25 +- board/ti/common/board_detect.c | 110 +++---- board/ti/ks2_evm/board_k2g.c | 11 + cmd/Kconfig | 1 + configs/am335x_pdu001_defconfig | 2 + configs/am57xx_evm_defconfig | 1 + configs/am57xx_hs_evm_defconfig | 1 + configs/dra7xx_evm_defconfig | 4 +- configs/dra7xx_hs_evm_defconfig | 1 + configs/omap3_logic_defconfig | 1 + drivers/core/Kconfig | 12 +- drivers/core/device.c | 10 +- drivers/core/root.c | 1 + drivers/core/uclass.c | 24 ++ drivers/i2c/i2c-uclass.c | 8 + drivers/i2c/omap24xx_i2c.c | 467 ++++++++++++++++++--------- drivers/power/palmas.c | 39 +++ drivers/power/pmic/pmic_tps62362.c | 27 ++ drivers/power/pmic/pmic_tps65217.c | 47 ++- drivers/power/pmic/pmic_tps65218.c | 88 +++++ drivers/power/pmic/pmic_tps65910.c | 60 +++- drivers/power/twl4030.c | 39 +++ include/asm-generic/global_data.h | 4 + include/configs/am43xx_evm.h | 2 + include/configs/ti_armv7_common.h | 18 +- include/dm/uclass-internal.h | 13 + include/fdtdec.h | 17 + include/i2c.h | 13 + include/palmas.h | 5 + include/power/tps65217.h | 2 + include/power/tps65910.h | 1 + include/twl4030.h | 6 +- lib/fdtdec.c | 38 ++- 48 files changed, 1033 insertions(+), 459 deletions(-) create mode 100644 arch/arm/include/asm/omap_i2c.h