Acked-by: Alison Wang alison.wang@freescale.com
Zhao Chenhui-3 wrote
Program the external regulator to switch off voltage in deep sleep.
Signed-off-by: Chenhui Zhao <
chenhui.zhao@
>
board/freescale/ls1021atwr/ls1021atwr.c | 34 +++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index 2c8d6d1..37ec0ba 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -578,6 +578,37 @@ struct smmu_stream_id dev_stream_id[] = { { 0x18c, 0x0e, "DEBUG" }, };
+#ifdef CONFIG_DEEP_SLEEP +/* program the regulator (MC34VR500) to support deep sleep */ +void ls1twr_program_regulator(void) +{
- unsigned int i2c_bus;
- u8 i2c_device_id;
+#define LS1TWR_I2C_BUS_MC34VR500 1 +#define MC34VR500_ADDR 0x8 +#define MC34VR500_DEVICEID 0x4 +#define MC34VR500_DEVICEID_MASK 0x0f
- i2c_bus = i2c_get_bus_num();
- i2c_set_bus_num(LS1TWR_I2C_BUS_MC34VR500);
- i2c_device_id = i2c_reg_read(MC34VR500_ADDR, 0x0) &
MC34VR500_DEVICEID_MASK;- if (i2c_device_id != MC34VR500_DEVICEID) {
printf("The regulator (MC34VR500) does not exist. The device does notsupport deep sleep.\n");
return;- }
- i2c_reg_write(MC34VR500_ADDR, 0x31, 0x4);
- i2c_reg_write(MC34VR500_ADDR, 0x4d, 0x4);
- i2c_reg_write(MC34VR500_ADDR, 0x6d, 0x38);
- i2c_reg_write(MC34VR500_ADDR, 0x6f, 0x37);
- i2c_reg_write(MC34VR500_ADDR, 0x71, 0x30);
- i2c_set_bus_num(i2c_bus);
+} +#endif
int board_init(void) { #ifndef CONFIG_SYS_FSL_NO_SERDES @@ -600,6 +631,9 @@ int board_init(void) u_qe_init(); #endif
+#ifdef CONFIG_DEEP_SLEEP
- ls1twr_program_regulator();
+#endif return 0; }
-- 1.9.1
U-Boot mailing list
U-Boot@.denx
-- View this message in context: http://u-boot.10912.n7.nabble.com/PATCH-arm-ls1021atwr-program-the-regulator... Sent from the U-Boot mailing list archive at Nabble.com.