Update the uDPU DTS to the version that is pending upstream [1][2].
[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220322105857.1... [2] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220322105857.1...
Signed-off-by: Robert Marko robert.marko@sartura.hr --- arch/arm/dts/armada-3720-uDPU.dts | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts index 95d46e8d08..1f534c0c65 100644 --- a/arch/arm/dts/armada-3720-uDPU.dts +++ b/arch/arm/dts/armada-3720-uDPU.dts @@ -99,7 +99,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi_quad_pins>;
- m25p80@0 { + spi-flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <54000000>; @@ -108,10 +108,15 @@ compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; - /* only bootloader is located on the SPI */ + partition@0 { - label = "uboot"; - reg = <0 0x400000>; + label = "firmware"; + reg = <0x0 0x180000>; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x10000>; }; }; }; @@ -148,15 +153,15 @@ scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- lm75@48 { + nct375@48 { status = "okay"; - compatible = "lm75"; + compatible = "ti,tmp75c"; reg = <0x48>; };
- lm75@49 { + nct375@49 { status = "okay"; - compatible = "lm75"; + compatible = "ti,tmp75c"; reg = <0x49>; }; };