Hi Andy,
On Tue, Oct 30, 2012 at 1:00 PM, Joe Hershberger joe.hershberger@gmail.com wrote:
Hi Marek,
Not sure if you were already aware of this, but I ran across these errors with MAKEALL on PPC.
alpr: powerpc-linux-gnu-ld: section .bootpg loaded at [00000000fffff000,00000000fffff27f] overlaps section .u_boot_list loaded at [00000000ffffee8c,00000000fffff3cb] powerpc-linux-gnu-ld: u-boot: section .bootpg lma 0xfffff000 adjusted to 0xfffff3cc
P2020DS_36BIT: powerpc-linux-gnu-ld: section .bootpg loaded at [00000000effff000,00000000effff4c3] overlaps section .u_boot_list loaded at [00000000efffef60,00000000effff7fb] powerpc-linux-gnu-ld: u-boot: section .bootpg lma 0xeffff000 adjusted to 0xeffff7fc
P2020DS_SDCARD: powerpc-linux-gnu-ld: section .bootpg loaded at [00000000f8fff000,00000000f8fff4b3] overlaps section .u_boot_list loaded at [00000000f8ffe874,00000000f8fff10f] powerpc-linux-gnu-ld: u-boot: section .bootpg lma 0xf8fff000 adjusted to 0xf8fff110
P2020DS_SPIFLASH: powerpc-linux-gnu-ld: section .bootpg loaded at [00000000f8fff000,00000000f8fff4b3] overlaps section .u_boot_list loaded at [00000000f8ffe778,00000000f8fff013] powerpc-linux-gnu-ld: u-boot: section .bootpg lma 0xf8fff000 adjusted to 0xf8fff014
These appear to simply be because my env changes make the u-boot build a bit too big. What are the memory areas on these 2 boards that can be used?
Thanks, -Joe