This board has not been converted to CONFIG_DM_BLK by the deadline. Remove it.
Signed-off-by: Simon Glass sjg@chromium.org ---
arch/arm/Kconfig | 1 - arch/arm/include/asm/arch-am33xx/chilisom.h | 14 -- arch/arm/mach-omap2/am33xx/chilisom.c | 184 ------------------ board/grinn/chiliboard/Kconfig | 15 -- board/grinn/chiliboard/MAINTAINERS | 8 - board/grinn/chiliboard/Makefile | 4 - board/grinn/chiliboard/README | 31 --- board/grinn/chiliboard/board.c | 205 -------------------- configs/chiliboard_defconfig | 47 ----- include/configs/chiliboard.h | 180 ----------------- 10 files changed, 689 deletions(-) delete mode 100644 arch/arm/include/asm/arch-am33xx/chilisom.h delete mode 100644 arch/arm/mach-omap2/am33xx/chilisom.c delete mode 100644 board/grinn/chiliboard/Kconfig delete mode 100644 board/grinn/chiliboard/MAINTAINERS delete mode 100644 board/grinn/chiliboard/Makefile delete mode 100644 board/grinn/chiliboard/README delete mode 100644 board/grinn/chiliboard/board.c delete mode 100644 configs/chiliboard_defconfig delete mode 100644 include/configs/chiliboard.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4cb32325ed3..b1eeb39d919 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1515,7 +1515,6 @@ source "board/freescale/ls1012aqds/Kconfig" source "board/freescale/ls1012ardb/Kconfig" source "board/freescale/ls1012afrdm/Kconfig" source "board/freescale/mx35pdk/Kconfig" -source "board/grinn/chiliboard/Kconfig" source "board/gumstix/pepper/Kconfig" source "board/h2200/Kconfig" source "board/hisilicon/hikey/Kconfig" diff --git a/arch/arm/include/asm/arch-am33xx/chilisom.h b/arch/arm/include/asm/arch-am33xx/chilisom.h deleted file mode 100644 index 493be643116..00000000000 --- a/arch/arm/include/asm/arch-am33xx/chilisom.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2017 Grinn - */ - -#ifndef __ARCH_ARM_MACH_CHILISOM_SOM_H__ -#define __ARCH_ARM_MACH_CHILISOM_SOM_H__ - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -void chilisom_enable_pin_mux(void); -void chilisom_spl_board_init(void); -#endif - -#endif diff --git a/arch/arm/mach-omap2/am33xx/chilisom.c b/arch/arm/mach-omap2/am33xx/chilisom.c deleted file mode 100644 index 39423051088..00000000000 --- a/arch/arm/mach-omap2/am33xx/chilisom.c +++ /dev/null @@ -1,184 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ - * Copyright (C) 2017, Grinn - http://grinn-global.com/ - */ - -#include <common.h> -#include <asm/arch/clock.h> -#include <asm/arch/clk_synthesizer.h> -#include <asm/arch/cpu.h> -#include <asm/arch/ddr_defs.h> -#include <asm/arch/hardware.h> -#include <asm/arch/omap.h> -#include <asm/arch/mem.h> -#include <asm/arch/mux.h> -#include <asm/arch/sys_proto.h> -#include <asm/emif.h> -#include <asm/io.h> -#include <errno.h> -#include <i2c.h> -#include <power/tps65217.h> -#include <spl.h> - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - -static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; - -static struct module_pin_mux i2c0_pin_mux[] = { - {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | - PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ - {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | - PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ - {-1}, -}; - -static struct module_pin_mux nand_pin_mux[] = { - {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ - {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ - {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ - {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ - {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ - {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ - {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ - {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ - {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ - {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ - {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ - {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ - {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ - {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ - {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ - {-1}, -}; - -static void enable_i2c0_pin_mux(void) -{ - configure_module_pin_mux(i2c0_pin_mux); -} - -void chilisom_enable_pin_mux(void) -{ - /* chilisom pin mux */ - configure_module_pin_mux(nand_pin_mux); -} - -static const struct ddr_data ddr3_chilisom_data = { - .datardsratio0 = MT41K256M16HA125E_RD_DQS, - .datawdsratio0 = MT41K256M16HA125E_WR_DQS, - .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE, - .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA, -}; - -static const struct cmd_control ddr3_chilisom_cmd_ctrl_data = { - .cmd0csratio = MT41K256M16HA125E_RATIO, - .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT, - - .cmd1csratio = MT41K256M16HA125E_RATIO, - .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT, - - .cmd2csratio = MT41K256M16HA125E_RATIO, - .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT, -}; - -static struct emif_regs ddr3_chilisom_emif_reg_data = { - .sdram_config = MT41K256M16HA125E_EMIF_SDCFG, - .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF, - .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1, - .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2, - .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3, - .ocp_config = 0x00141414, - .zq_config = MT41K256M16HA125E_ZQ_CFG, - .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY, -}; - -void chilisom_spl_board_init(void) -{ - int mpu_vdd; - int usb_cur_lim; - - enable_i2c0_pin_mux(); - - /* Get the frequency */ - dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev); - - - if (i2c_probe(TPS65217_CHIP_PM)) - return; - - /* - * Increase USB current limit to 1300mA or 1800mA and set - * the MPU voltage controller as needed. - */ - if (dpll_mpu_opp100.m == MPUPLL_M_1000) { - usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA; - mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV; - } else { - usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA; - mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV; - } - - if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, - TPS65217_POWER_PATH, - usb_cur_lim, - TPS65217_USB_INPUT_CUR_LIMIT_MASK)) - puts("tps65217_reg_write failure\n"); - - /* Set DCDC3 (CORE) voltage to 1.125V */ - if (tps65217_voltage_update(TPS65217_DEFDCDC3, - TPS65217_DCDC_VOLT_SEL_1125MV)) { - puts("tps65217_voltage_update failure\n"); - return; - } - /* Set CORE Frequencies to OPP100 */ - do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); - - /* Set DCDC2 (MPU) voltage */ - if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) { - puts("tps65217_voltage_update failure\n"); - return; - } - - /* Set LDO3 to 1.8V and LDO4 to 3.3V */ - if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, - TPS65217_DEFLS1, - TPS65217_LDO_VOLTAGE_OUT_1_8, - TPS65217_LDO_MASK)) - puts("tps65217_reg_write failure\n"); - - if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, - TPS65217_DEFLS2, - TPS65217_LDO_VOLTAGE_OUT_3_3, - TPS65217_LDO_MASK)) - puts("tps65217_reg_write failure\n"); - - /* Set MPU Frequency to what we detected now that voltages are set */ - do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); -} - -#define OSC (V_OSCK/1000000) -const struct dpll_params dpll_ddr_chilisom = { - 400, OSC-1, 1, -1, -1, -1, -1}; - -const struct dpll_params *get_dpll_ddr_params(void) -{ - return &dpll_ddr_chilisom; -} - -const struct ctrl_ioregs ioregs_chilisom = { - .cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, - .cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, - .cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE, - .dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, - .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, -}; - -void sdram_init(void) -{ - config_ddr(400, &ioregs_chilisom, - &ddr3_chilisom_data, - &ddr3_chilisom_cmd_ctrl_data, - &ddr3_chilisom_emif_reg_data, 0); -} - -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/board/grinn/chiliboard/Kconfig b/board/grinn/chiliboard/Kconfig deleted file mode 100644 index 20056e81a14..00000000000 --- a/board/grinn/chiliboard/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_CHILIBOARD - -config SYS_BOARD - default "chiliboard" - -config SYS_VENDOR - default "grinn" - -config SYS_CONFIG_NAME - default "chiliboard" - -config SYS_SOC - default "am33xx" - -endif diff --git a/board/grinn/chiliboard/MAINTAINERS b/board/grinn/chiliboard/MAINTAINERS deleted file mode 100644 index 5eaccb27915..00000000000 --- a/board/grinn/chiliboard/MAINTAINERS +++ /dev/null @@ -1,8 +0,0 @@ -CHILIBOARD -M: Marcin Niestroj m.niestroj@grinn-global.com -S: Maintained -F: arch/arm/include/asm/arch-am33xx/chilisom.h -F: arch/arm/mach-omap2/am33xx/chilisom.c -F: board/grinn/chiliboard/ -F: include/configs/chiliboard.h -F: configs/chiliboard_defconfig diff --git a/board/grinn/chiliboard/Makefile b/board/grinn/chiliboard/Makefile deleted file mode 100644 index 2c33ccdbf2d..00000000000 --- a/board/grinn/chiliboard/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# (C) Copyright 2017 Grinn - -obj-y := board.o diff --git a/board/grinn/chiliboard/README b/board/grinn/chiliboard/README deleted file mode 100644 index cea4c1d42e7..00000000000 --- a/board/grinn/chiliboard/README +++ /dev/null @@ -1,31 +0,0 @@ -How to use U-Boot on Grinn's chiliBoard --------------------------------------- - -- Build U-Boot for chiliBoard: - -$ make mrproper -$ make chiliboard_defconfig -$ make - -This will generate the SPL image called MLO and the u-boot.img. - -- Flash the SPL image into the micro SD card: - -sudo dd if=MLO of=/dev/mmcblk0 bs=128k; sync - -- Flash the u-boot.img image into the micro SD card: - -sudo dd if=u-boot.img of=/dev/mmcblk0 bs=128k seek=3; sync - -- Jumper settings: - -S2: 1 1 1 0 1 0 - -where 0 means bottom position and 1 means top position (from the -switch label numbers reference). - -- Insert the micro SD card in the board. - -- Connect USB cable between chiliBoard and the PC for the power and console. - -- U-Boot messages should come up. diff --git a/board/grinn/chiliboard/board.c b/board/grinn/chiliboard/board.c deleted file mode 100644 index 73a7d8281cc..00000000000 --- a/board/grinn/chiliboard/board.c +++ /dev/null @@ -1,205 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ - * Copyright (C) 2017, Grinn - http://grinn-global.com/ - */ - -#include <common.h> -#include <asm/arch/chilisom.h> -#include <asm/arch/cpu.h> -#include <asm/arch/hardware.h> -#include <asm/arch/omap.h> -#include <asm/arch/mem.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/mux.h> -#include <asm/arch/sys_proto.h> -#include <asm/emif.h> -#include <asm/io.h> -#include <cpsw.h> -#include <environment.h> -#include <errno.h> -#include <miiphy.h> -#include <serial.h> -#include <spl.h> -#include <watchdog.h> - -DECLARE_GLOBAL_DATA_PTR; - -static __maybe_unused struct ctrl_dev *cdev = - (struct ctrl_dev *)CTRL_DEVICE_BASE; - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -static struct module_pin_mux uart0_pin_mux[] = { - {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ - {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ - {-1}, -}; - -static struct module_pin_mux mmc0_pin_mux[] = { - {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ - {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ - {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ - {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ - {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ - {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ - {-1}, -}; - -static struct module_pin_mux rmii1_pin_mux[] = { - {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRS */ - {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXERR */ - {OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */ - {OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TXD1 */ - {OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TXD0 */ - {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RXD1 */ - {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RXD0 */ - {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ - {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ - {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_REFCLK */ - {-1}, -}; - -static void enable_board_pin_mux(void) -{ - chilisom_enable_pin_mux(); - - /* chiliboard pinmux */ - configure_module_pin_mux(rmii1_pin_mux); - configure_module_pin_mux(mmc0_pin_mux); -} -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - -#ifndef CONFIG_DM_SERIAL -struct serial_device *default_serial_console(void) -{ - return &eserial1_device; -} -#endif - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -void set_uart_mux_conf(void) -{ - configure_module_pin_mux(uart0_pin_mux); -} - -void set_mux_conf_regs(void) -{ - enable_board_pin_mux(); -} - -void am33xx_spl_board_init(void) -{ - chilisom_spl_board_init(); -} -#endif - -/* - * Basic board specific setup. Pinmux has been handled already. - */ -int board_init(void) -{ -#if defined(CONFIG_HW_WATCHDOG) - hw_watchdog_init(); -#endif - - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - gpmc_init(); - - return 0; -} - -#ifdef CONFIG_BOARD_LATE_INIT -int board_late_init(void) -{ -#if !defined(CONFIG_SPL_BUILD) - uint8_t mac_addr[6]; - uint32_t mac_hi, mac_lo; - - /* try reading mac address from efuse */ - mac_lo = readl(&cdev->macid0l); - mac_hi = readl(&cdev->macid0h); - mac_addr[0] = mac_hi & 0xFF; - mac_addr[1] = (mac_hi & 0xFF00) >> 8; - mac_addr[2] = (mac_hi & 0xFF0000) >> 16; - mac_addr[3] = (mac_hi & 0xFF000000) >> 24; - mac_addr[4] = mac_lo & 0xFF; - mac_addr[5] = (mac_lo & 0xFF00) >> 8; - - if (!env_get("ethaddr")) { - printf("<ethaddr> not set. Validating first E-fuse MAC\n"); - - if (is_valid_ethaddr(mac_addr)) - eth_env_set_enetaddr("ethaddr", mac_addr); - } - - mac_lo = readl(&cdev->macid1l); - mac_hi = readl(&cdev->macid1h); - mac_addr[0] = mac_hi & 0xFF; - mac_addr[1] = (mac_hi & 0xFF00) >> 8; - mac_addr[2] = (mac_hi & 0xFF0000) >> 16; - mac_addr[3] = (mac_hi & 0xFF000000) >> 24; - mac_addr[4] = mac_lo & 0xFF; - mac_addr[5] = (mac_lo & 0xFF00) >> 8; - - if (!env_get("eth1addr")) { - if (is_valid_ethaddr(mac_addr)) - eth_env_set_enetaddr("eth1addr", mac_addr); - } -#endif - - return 0; -} -#endif - -#if !defined(CONFIG_DM_ETH) && defined(CONFIG_DRIVER_TI_CPSW) && \ - !defined(CONFIG_SPL_BUILD) -static void cpsw_control(int enabled) -{ - /* VTP can be added here */ - - return; -} - -static struct cpsw_slave_data cpsw_slaves[] = { - { - .slave_reg_ofs = 0x208, - .sliver_reg_ofs = 0xd80, - .phy_addr = 0, - } -}; - -static struct cpsw_platform_data cpsw_data = { - .mdio_base = CPSW_MDIO_BASE, - .cpsw_base = CPSW_BASE, - .mdio_div = 0xff, - .channels = 8, - .cpdma_reg_ofs = 0x800, - .slaves = 1, - .slave_data = cpsw_slaves, - .ale_reg_ofs = 0xd00, - .ale_entries = 1024, - .host_port_reg_ofs = 0x108, - .hw_stats_reg_ofs = 0x900, - .bd_ram_ofs = 0x2000, - .mac_control = (1 << 5), - .control = cpsw_control, - .host_port_num = 0, - .version = CPSW_CTRL_VERSION_2, -}; - -int board_eth_init(bd_t *bis) -{ - int rv, n = 0; - - writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel); - cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RMII; - - rv = cpsw_register(&cpsw_data); - if (rv < 0) - printf("Error %d registering CPSW switch\n", rv); - else - n += rv; - - return n; -} -#endif diff --git a/configs/chiliboard_defconfig b/configs/chiliboard_defconfig deleted file mode 100644 index b6cde09d6f3..00000000000 --- a/configs/chiliboard_defconfig +++ /dev/null @@ -1,47 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_AM33XX=y -CONFIG_TARGET_CHILIBOARD=y -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_FAT_SUPPORT=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTDELAY=1 -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_DEFAULT_FDT_FILE="am335x-chiliboard.dtb" -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_POWER_SUPPORT=y -CONFIG_SPL_WATCHDOG_SUPPORT=y -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=8000000.nand" -CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nand:128k(NAND.SPL),128k(NAND.SPL.backup1),128k(NAND.SPL.backup2),128k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),1m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)" -CONFIG_ENV_IS_IN_MMC=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_DM_GPIO=y -CONFIG_MMC_OMAP_HS=y -CONFIG_NAND=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_MII=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_MUSB_HOST=y -CONFIG_USB_MUSB_DSPS=y -CONFIG_USB_STORAGE=y -CONFIG_FAT_WRITE=y -CONFIG_LZO=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h deleted file mode 100644 index 4372280d2bb..00000000000 --- a/include/configs/chiliboard.h +++ /dev/null @@ -1,180 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2017 Grinn - http://grinn-global.com/ - */ - -#ifndef __CONFIG_CHILIBOARD_H -#define __CONFIG_CHILIBOARD_H - -#include <configs/ti_am335x_common.h> - -#ifndef CONFIG_SPL_BUILD -# define CONFIG_TIMESTAMP -#endif - -/* Clock Defines */ -#define V_OSCK 24000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK) - -#define NANDARGS \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "nandargs=setenv bootargs console=${console} ${optargs} " \ - "${mtdparts} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system\0" \ - "nandrootfstype=ubifs rootwait=1\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${fdt_addr} NAND.u-boot-spl-os; " \ - "nand read ${loadaddr} NAND.kernel; " \ - "bootz ${loadaddr} - ${fdt_addr}\0" - -#define CONFIG_BOOTCOMMAND \ - "run mmcboot; " \ - "run nandboot; " \ - "run netboot" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ - "fdt_addr=0x87800000\0" \ - "boot_fdt=try\0" \ - "console=ttyO0,115200n8\0" \ - "image=zImage\0" \ - "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ - "ip_dyn=yes\0" \ - "optargs=\0" \ - "loadbootscript=" \ - "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ - "${boot_dir}/${image}\0" \ - "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} " \ - "${boot_dir}/${fdt_file}\0" \ - "mmcdev=0\0" \ - "mmcpart=1\0" \ - "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} ${optargs} " \ - "${mtdparts} " \ - "root=${mmcroot}\0" \ - "mmcloados=run mmcargs; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - "mmcboot=mmc dev ${mmcdev}; " \ - "if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadimage; then " \ - "run mmcloados;" \ - "fi;" \ - "fi;\0" \ - "netargs=setenv bootargs console=${console},${baudrate} ${optargs} " \ - "${mtdparts} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "${get_cmd} ${image}; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - NANDARGS - -/* NS16550 Configuration */ -#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ -#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ -#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ -#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ -#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ -#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ - -/* PMIC support */ -#define CONFIG_POWER_TPS65217 - -/* SPL */ -/* Bootcount using the RTC block */ -#define CONFIG_SYS_BOOTCOUNT_BE - -/* NAND: device related configs */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ - CONFIG_SYS_NAND_PAGE_SIZE) -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -/* NAND: driver related configs */ -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ - 10, 11, 12, 13, 14, 15, 16, 17, \ - 18, 19, 20, 21, 22, 23, 24, 25, \ - 26, 27, 28, 29, 30, 31, 32, 33, \ - 34, 35, 36, 37, 38, 39, 40, 41, \ - 42, 43, 44, 45, 46, 47, 48, 49, \ - 50, 51, 52, 53, 54, 55, 56, 57, } - -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 14 -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 -/* NAND: SPL related configs */ - -/* USB configuration */ -#define CONFIG_ARCH_MISC_INIT -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - -/* - * Disable MMC DM for SPL build and can be re-enabled after adding - * DM support in SPL - */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_DM_MMC -#undef CONFIG_TIMER -#endif - -#if defined(CONFIG_ENV_IS_IN_NAND) -#define CONFIG_ENV_OFFSET 0x001c0000 -#define CONFIG_ENV_OFFSET_REDUND 0x001e0000 -#define CONFIG_ENV_SIZE SZ_128K -#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#else -#define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_ENV_OFFSET SZ_128K -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#define CONFIG_ENV_SIZE SZ_8K -#define CONFIG_SYS_REDUNDAND_ENVIRONMENT -#endif - -/* Network. */ -#define CONFIG_PHY_SMSC - -#endif /* ! __CONFIG_CHILIBOARD_H */