This patch adds support for networking in SPL on TI AM335x based boards. Vendor Class Identifier used by SPL during BOOTP is "AM335x U-Boot SPL".
Signed-off-by: Ilya Yanok ilya.yanok@cogentembedded.com
--- Changes in v3: - set Vendor Class Identifier for SPL
Changes in v4: - SPL_BOARD_INIT is not needed anymore
include/configs/am335x_evm.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 69ab076..d36ad8f 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -185,7 +185,7 @@ /* Defines for SPL */ #define CONFIG_SPL #define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (46 * 1024) +#define CONFIG_SPL_MAX_SIZE (101 * 1024) #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#define CONFIG_SPL_BSS_START_ADDR 0x80000000 @@ -205,6 +205,9 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT +#define CONFIG_SPL_NET_SUPPORT +#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" +#define CONFIG_SPL_ETH_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
/*