Thanks for your response
I'm wondering how to use te Network Console Protocol. I've read the README.NetConsole file and discoverd it, but does this feature is available on every boards-configs, such as the at91 one?
If you enable it, it should work. But only few boards actually use this feature in their default configuration.
Is there any #define to enable it or must I modify some sources file to do this?
but when i try to use ./ncip.sh 192.168.0.66, nothings happen So i thoutgh the ncip have to be the one of my desktop computer, but nothing better
Run a sniffer (ethereal) on your network and check if you see any packets at all. You *did* switch the stdin / stdout channels in U-Boot, didn't you?
if setenv nc 'setenv stdout nc;setenv stdin nc have succed, with run nc, it is switched But, i've seen with ethereal that no packets where transmited through my eth interface It might be the first step to solve this problem
Does anyone have already use this feature?
Yes, it is being used actively on a couple of boards, some of them in production with high volumes.
Best regards,
Wolfgang Denk
-- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de Programmer's Lament: (Shakespeare, Macbeth, Act I, Scene vii) "That we but teach bloody instructions, which, being taught, return to plague the inventor..."