On Fri, Apr 08, 2022 at 10:28:05AM +0200, Pali Rohár wrote:
On P2020 board is SPL malloc simple always failing with error and loops:
SD boot... alloc space exhausted Bad trap at PC: f8f8b5f0, SR: 21200, vector=d00 NIP: 00000000 XER: 00000000 LR: 00000000 REGS: f8f8b5f0 TRAP: 20000000 DAR: 00000000 MSR: 00021200 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
GPR00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 GPR08: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 GPR24: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Call backtrace: Exception in kernel pc f8f8b5f0 signal 0
Inspection showed that gd->malloc_limit is zero. And it is because generally SPL_FRAMEWORK initialize SPL's gd->malloc_limit. But when SPL_FRAMEWORK is not enabled then in most cases nobody initialize gd->malloc_limit and so SPL malloc simple does not work.
So disable SPL_SYS_MALLOC_SIMPLE by default when SPL_FRAMEWORK is not enabled. SPL_SYS_MALLOC_SIMPLE can be disabled only by setting SPL_SYS_MALLOC_F_LEN to zero. So do it.
This change fixes SPL error "alloc space exhausted" on P2020 board.
Signed-off-by: Pali Rohár pali@kernel.org
Applied to u-boot/master, thanks!