
Hi Marek,
-----Original Message----- From: Marek Vasut [mailto:marex@denx.de] Sent: Thursday, November 26, 2015 9:25 AM To: Ted Cc: swarren@nvidia.com; u-boot@lists.denx.de; linux.amoon@gmail.com; Hans de Goede Subject: Re: [PATCH] usb: xhci: Fix vendor command error if the request type is USB_REQ_SET_ADDRESS or USB_REQ_SET_CONFIGURATION.
On Wednesday, November 25, 2015 at 06:57:48 AM, Ted Chen wrote:
Add a condition of set_address and set_configuration to
check if the
request is standardized.
Signed-off-by: Ted Chen tedchen@realtek.com
drivers/usb/host/xhci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/xhci.c
b/drivers/usb/host/xhci.c index
ca598aa..cb8a04b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -941,10 +941,12 @@ static int _xhci_submit_control_msg(struct usb_device *udev, unsigned long pipe, if
(usb_pipedevice(pipe) == ctrl->rootdev)
return xhci_submit_root(udev, pipe, buffer, setup);
Hi! What do you say we reorder the check a little:
if ((setup->requesttype & USB_TYPE_MASK) == USB_TYPE_STANDARD) { if (setup->request == USB_REQ_SET_ADDRESS) return xhci_address_device(udev, root_portnr);
if (setup->request == USB_REQ_SET_CONFIGURATION) ... }
Also, I suspect this sort of fix needs to be applied to at least dwc3 ep0.c, r8a66597-hcd.c and musb_hcd.c as well.
I don't have another board in my hand, so I can't verify the other xhci host controller.
But I have confirmed this patch in xhci.c actually can fix errors while the the request type is USB_REQ_SET_ADDRESS or USB_REQ_SET_CONFIGURATION in USB vendor command.
Paging Hans so he can share his visdom too :)
Hi Hans,
Do you have any comments?
Thanks
- if (setup->request == USB_REQ_SET_ADDRESS)
- if (setup->request == USB_REQ_SET_ADDRESS &&
return xhci_address_device(udev, root_portnr);(setup->requesttype & USB_TYPE_MASK) == USB_TYPE_STANDARD)
- if (setup->request == USB_REQ_SET_CONFIGURATION) {
- if (setup->request == USB_REQ_SET_CONFIGURATION &&
ret = xhci_set_configuration(udev); if (ret) { puts("Failed to configure xHCI endpoint\n");(setup->requesttype & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
Best regards, Marek Vasut
------Please consider the environment before printing this e-mail.